Clearance Items

This zinc diecast height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.

High quality 18% Nickel-Silver fret wire in jumbo sizes.

• 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
• 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:

• Small Sizes - P-GTFW-S-X
• Medium Sizes - P-GTFW-M-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"

Double edge nut files featuring popular guitar gauges specially designed for slotting nuts. Each set of files is specifically designed for guitars of a particular type. This set of three files will cover the work of six and cuts a smooth round bottom slot. Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.

• 4” cutting edge
• Set of 3 files
• Made In Japan

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

High quality stainless steel fret wire available in popular sizes. Straight 2ft lengths sold individually or by the pound. For standard 18% Nickel-Silver options please see:

• Small Sizes - P-GTFW-S-X
• Medium Sizes - P-GTFW-M-X
• Jumbo Sizes - P-GTFW-J-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-STEEL-1 2.0 mm (0.079") 1.0 mm (0.039") 2.8 mm (0.110") 0.6 mm (0.024") 0.95 mm (0.037") Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons P-GTFW-STEEL-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.6 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-STEEL-3 2.7 mm (0.106") 1.4 mm (0.055") 3.2 mm (0.126")

High quality 18% Nickel-Silver fret wire in small sizes.

• 2mm - 2.1mm Crown Widths, (0.079" - 0.083")
• 0.9mm - 1.3mm Crown Heights, (0.035" - 0.051")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-S-1 38 PRICE P-GTFW-S-2 31 PRICE P-GTFW-S-3 32 PRICE P-GTFW-S-4 26 PRICE P-GTFW-S-5 35 PRICE For additional sizes and options please see:

• Medium Sizes - P-GTFW-M-X
• Jumbo Sizes - P-GTFW-J-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-S-1 2.0 mm (0.079") 0.9 mm (0.035") 2.5 mm (0.098") 0.5 mm (0.020") 0.83 mm (0.033")

High quality 18% Nickel-Silver fret wire in medium sizes.

• 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
• 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")

Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:

• Small Sizes - P-GTFW-S-X
• Jumbo Sizes - P-GTFW-J-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3

The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 41mm (1 5/8") Radius: 360mm Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

Beautiful TUSQ traditional style bridge pins with a 2mm dot inlay. This is a perfect option to upgrade the pins in your acoustic guitar and dramatically improve the harmonics and tone of your instrument. These pins have a 5.14mm diameter.

Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.

Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.

Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs

• 0.625" W x 0.625" L x 0.5" D
• 300° rotation
• Power Rating: ¼ watt
• ¼" Knurled 18-Spline Split Shaft
• ¾" Bushing Length
• Tolerance: ±20 %
• Very Low Noise

Fret slot saw with two blades, one for push-cutting and another for pull-cutting.

Genuine Bigsby® replacement hinge for vibrato units. This hinge is the stock hinge used on the B700.

These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design lets the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.

"G" with arrow, package of 4. Gretsch originally used these knobs on guitars from 1957 - 1967. These knobs are designed to fit 1/4" solid shaft pots.

Kent Armstrong “Slimbucker” jazz pickup with slim profile (3/8" thick), side-mount configuration. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited.

CP files have special file tooth pattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.

Genuine Bigsby® replacement hinge for Gretsch by Bigbsy B3C and B6C vibratos.

This is the recreation of the popular Kluson® #9 tailpiece. This particular model tailpiece was preferred for many vintage era arch-top guitar builds and is still one of the best choices available today. Fits large archtop instruments with a rim thickness of 2-7/8 in. or more. Machined brass.