Clearance Items

100 V ceramic disc capacitors. ± 10% tolerance.

Hipshot's New Classic Closed (enclosed gear) Guitar Tuners posses the precision, craftsmanship and technology you have come to expect from Hipshot Products.

• 16:1 gear ratio for finer tuning
• Schaller M6L Mini footprint.
• The option for staggered post configuration means you can increase your headstock's break angle, remove buzz at the nut and ditch your pesky string tree!

The OOD9 is the updated version of the original Maxon overdrive pedal, the OD880. This overdrive is equipped with NJM4558D op amps for a warm and low-noise overdrive that pairs perfectly with tube amplifiers and other distortion pedals. The OOD9 offers a dynamic response that preserves the tone of the input providing a smooth and clear overdriven sound.

Basic front panel for Super Reverb. Material is .032" aluminum.

Miniature sharp cutoff pentode designed for use where only low plate and screen voltages are available. The 6AJ5 is especially suitable for operation at high frequencies.

Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.

The Gotoh 404BO-4 is a solid bass bridge for bassists looking for the best performance available from their bridge. The thick hard zinc plate paired with brass saddles offers a balanced tone. The saddles feature two height adjustment screws to dial in the perfect action as well as a wide area of travel for a perfect intonation. The height adjustment screws sit in slots on the bottom plate for additional stability. This string through bass bridge comes with a mounting hardware and also includes a hex wrench for saddle adjustments.

Retrofits guitars equipped with Schaller® M6 Mini tuning machines. Take your music to a new low with the closed gear Xtender. With the flip of a lever, your low E string can go down to D, C or even B (depending on your string gauge).

Power-amplifier tube of the all-metal type for use in the output stage of transformerless (ac/dc) radio receivers, especially those designed to have ample reserve of power-delivering bilities.

The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:

• Guitar/ Keyboard/Bass amplifiers and combos
• Audio mixing consoles / Powered mixing consoles
• Stand -alone stereo effect units for studio and PA usage
• Effects pedals

Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs

• 0.625" W x 0.625" L x 0.5" D
• 300° rotation
• Power Rating: ¼ watt
• ¼" Knurled 18-Spline Split Shaft
• ¾" Bushing Length
• Tolerance: ±20 %
• Very Low Noise

Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 5.92k Ohms
• Inductance (henrys) = 3.61
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

• Dual primary 115/230 VAC
• 50/60 Hz. operation
• Dual secondaries for series or parallel connections
• 4,000 V RMS Hipot test
• Class F insulation (155 degrees, C)
• Chassis mount
• Dual bobbin construction
• Dual use terminals
• C UL US recognized (E207860)
• TUV Type Approved
• CE certified to IEC 950 (Approved to EN 60-742 Safety Isolating Transformers)

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD510 series solves these problems by combining “Rock-solid"™ technology and the post collar or: “self-center guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD510 series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through it is use of the ideal materials selected for each component part you also obtain a far superior sound. 1:15 gear ratio.

Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.

Fits most American and Mexican stratocasters. 3 ply standard 11 hole pickguard. Fits 3 single coil pickukps.

Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.

Original, made in USA, covers for open-style tele neck pickups. These premium tele covers are made of nickel silver.

Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.

Totally professional in design and performance. Small and lightweight, this precision machine fits guitar headpieces that will not take full size machines. The mini buttons provide more space for players' fingers (even larger fingers) to tune strings. Gear ratio is 14:1. Sealed-in lubrication keeps Mini-Rotomatics perfect for a lifetime! Includes ⅝" washers, bushings and wood screws.

Duodecar type used as horizontal-deflection amplifier in television receivers.

Vibramate V5-TEV Stage II with FilterTron - TV Jones Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

This electronic component storage box works great for storing caps, pots, resistors and other electronic components. Made of plastic.

Replacement bushings for Gibson® headstocks with 8.85mm outside diameter and 6.35mm inside diameter These Kluson® replacement push-in bushings are designed to appear like current Gibson® production with the more rounded flange. Same mounting specs as the bushings that accompany the current Kluson® production tuning machines so they will easily replace similar bushings with the same spec requirements