Clearance Items

XLR 3 Pole female audio cable connector. Musician range. Black finish, silver contact plating. "Jaws" cable retention system.

1/4" phone plug, jaws cable clamp, thermoplastic backshell. Features:

• Stylised Shell design with ergonomic grip
• Robust diecast keyed shell
• Great solderability with increased solder area
• Precision machined contacts
• "Jaws" cable retention system
• Quick and easy assembly
• Nickel-plated contacts

Beam power pentode primarily intended for use as an audio frequency power amplifier. It is particularly useful in applications where the available supply voltage is relatively low.

Fits most American Telecasters. This modern pickguard fits American, American Standard, American Deluxe, American Special, Highway One™, Road Worn®, Deluxe Player, Blacktop, Standard and Deluxe series Telecaster guitars (also fits Squier® Standard series Telecaster models 2004-present).

High quality 18% Nickel-Silver fret wire in small sizes.

• 2mm - 2.1mm Crown Widths, (0.079" - 0.083")
• 0.9mm - 1.3mm Crown Heights, (0.035" - 0.051")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-S-1 38 PRICE P-GTFW-S-2 31 PRICE P-GTFW-S-3 32 PRICE P-GTFW-S-4 26 PRICE P-GTFW-S-5 35 PRICE For additional sizes and options please see:

• Medium Sizes - P-GTFW-M-X
• Jumbo Sizes - P-GTFW-J-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-S-1 2.0 mm (0.079") 0.9 mm (0.035") 2.5 mm (0.098") 0.5 mm (0.020") 0.83 mm (0.033")

9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:

• Center PCB hole diameter -0.73"
• Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")

Duodecar type used as a horizontal-amplifier tube in color and black-and-white television receivers.

Stud Mount Adjustable Bridge, Hardware, 2-1/16" String, 3-¼" Stud. Hardware included.

The Raptor is one of the newest Jensen speakers, released after a long time in development refining the ideal qualities of a contemporary, sophisticated, touch responsive speaker. The result is a 100W ceramic speaker with a characteristic, vocal, rounded midrange and a silky-smooth top end, all based on a solid, fat and firm bass foundation. Eminently versatile, the Raptor is equally suitable to clean, crunch and lead tones. Guitarist Description: Powerful, smooth and warm. Excellent definition in the upper midrange. When presented with overdrive distortion, it exhibits a silky, full-sounding lead tone.

• Lows: Fat/Deep
• Mids: Firm/Vocal
• Highs: Subtle/Extended
• Overdrive: Smooth/Crunchy

300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.

Original Fender® pickguard. This vintage-style pickguard fits many 1950s-style American Vintage, Hot Rod, Road Worn®, Classic Player and Classic series Stratocaster guitars with three single-coil pickups.

The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.

Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.

Like its 12” version, the Tornado 10 is remarkably versatile, with evenly balanced tone, excellent articulation, and a detailed, dynamic response with a hint of a very musical, sweet dynamic compression. The powerful Neodymium magnet and the 2” voice coil allow for 100W of power handling in a featherlight weight of just 1.7kgs (3.75lbs)

High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.

Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.

Subminiature pentode for use as an A.F. power amplifier in portable equipment.

Miniature pentode intended for use as a radio-frequency or intermediate frequency amplifier in automobile radio receivers. The tube is specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.

U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.

• 3.22 in. (82mm) stud spacing

The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series features an 18:1 gear ratio for smoother, more precise tuning. This compact machine head is perfect for use on smaller and in-line headpieces.

The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series features an 18:1 gear ratio for smoother, more precise tuning. This compact machine head is perfect for use on smaller and in-line headpieces.

Power-amplifier tube of the all-metal type for use in the output stage of transformerless (ac/dc) radio receivers, especially those designed to have ample reserve of power-delivering bilities.

Heater-cathode type transmitting beam power amplifier in the 9 pin miniature construction. It is intended for use in compact, low-power mobile transmitters and in the low-power stages of larger fixed station transmitters.

Low-mu triode designed for use as the vertical deflection amplifier in television receivers.