¼" Plug - Amphenol, Straight, Mono, Gold Contacts
2-pole 1/4" professional straight phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.
¼" Plug - Amphenol, Mono, Right Angle, Nickel
Amphenol "T-Series (Pro Range)" Phone Plug. 1/4" Mono right-angle plug with standard Jaws cable clamp, thermoplastic backshell and satin finish. Internal cable clamp fits cable outer diameters ranging from 0.118" to 0.236" (3 mm to 6 mm).
Speaker - Jensen® D-Series, 12", C12D, 150W
The C12D is able to return the powerful, organic, warm tone and character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar.
Tremolo - Gotoh, Low Friction, retrofitA newly fashioned design from Gotoh® with almost no internal friction. Designed to directly retrofit the mounting hole pattern of a vintage tremolo. You can use this bridge to replace a conventional, 6 mounting screw Strat® tremolo with no mods to the body. Hardware included.
Starting at $73.59
Transistor - Fender®, A1837, amplifier application
A1837 Transistor - Fender. Power amplifier applications and Driver Stage Amplifier Applications.
DeoxIT® Gold - Caig, GN5 Spray, 5% solution
DeoxIT® GOLD GN5 Spray (formerly ProGold), 5% solution, 163 g, non-flammable, quick dry - non drip, and safe on plastics! Cannot ship by Air or Mail. Must ship UPS ground.
Starting at $16.15
Locking Nut - Gotoh, for Floyd Rose Style Tremolos, Top Mount, 41mmGotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 41mm (1 5/8") Radius: 360mm Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.
Starting at $17.95
Knob - Gretsch, "G" with Arrow logo, set screw"G" with arrow, package of 4. Gretsch originally used these knobs on guitars from 1957 - 1967. These knobs are designed to fit 1/4" solid shaft pots.
Package of 4
Starting at $41.95
Pickup - Gotoh, HB-Classic, Humbucker, Made In Japan
The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $35.61
Speaker - Jensen® D-Series, 12", N12D, 150W
The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.
Panel - aluminum, front, for Deluxe Reverb
Basic front panel for Deluxe Reverb. Material is.032" aluminum.
Potentiometer - Audio, Knurled Shaft, Sealed, 24mm
Audio taper, knurled split shaft, sealed body 24mm potentiometer
¼" Plug - Amphenol, Mono, Right Angle, SwitchPlug™, Large
The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.
Speaker - Jensen® Jets, 12", Tornado Stealth 80, 80W
The Tornado Stealth 80 is the Neodymium counterpart of the ceramic powered Electric Lightning. The Stealth 80 is extremely efficient, with slightly scooped mids, and it shines in the cleanest as well as in the heaviest tonal applications. It delivers exceptional punch and attack, retaining all the clarity needed for palm-muted riffs and power chords, as well as crystal clear clean rhythm playing.
Speaker - Jensen® MOD®, 12", MOD12-110, 110W
The Mod 12-110 is a 12" ferrite speaker with 110 watts of power. Strong, punchy, and articulate with emphasis on the mids. It responds to overdrive distortion with a tight and balanced fuzz that remains strong and straightforward.
Diode - Hexfred, 16A, 600V, ultrafast
High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.
Vacuum Tube - 6922 / E88CC, Dual Triode, Gold Pins
Dual Triode, Gold Pins
Vacuum Tube - 6BY6, Heptode
Miniature dual-control heptode designed primarily for use as a combined sync separator and sync clipper in television receivers. Each of the two independent control grids exhibits a sharp cutoff characteristic.
Nut - Gold Tone, Zero Guide Slotted
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.
Starting at $13.95
Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
- Center PCB hole diameter -0.73"
- Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
Potentiometer - Bourns, Audio, Knurled Shaft, ¾" Bushing
Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs
- 0.625" W x 0.625" L x 0.5" D
- 300° rotation
- Power Rating: ¼ watt
- ¼" Knurled 18-Spline Split Shaft
- ¾" Bushing Length
- Tolerance: ±20 %
- Very Low Noise
Potentiometer - Bourns, Linear, Knurled, Conductive Polymer
Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.
Starting at $8.75
Vacuum Tube - 12AF6, Pentode
Miniature pentode intended for use as a radio-frequency or intermediate frequency amplifier in automobile radio receivers. The tube is specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.
Vacuum Tube - 25CD6G, Beam Pentode
New Old Stock (N.O.S.) tube. 25CD6GB is identical to the 6CD6GA except with different heater ratings. Beam power tube, octal base.