Clearance Items

This radio kit will cover the AM radio band along with the SW radio band. Power for this receiver is 1.5 V DC for the filaments and 45V DC for the plate current. A D cell and five 9V transistor batteries wired in series will work to power this radio. A 2000 ohm headset or an audio amplifier is required. Requires two T-1T4_DF91 tubes (not included).

Black Cliff K5 knob with short indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.

Replacement for Bassman heads. Equivalent to #125A13A & #022871.

Triple grid sharp cut-off amplifier. It is designed for service in high gain RF and IF amplifier applications and for limited service in FM receivers. The double cathode connection is useful in reducing cathode circuit coupling.

Original, made in USA, covers for 1950s, vintage-style, tele neck pickups. These premium tele covers are made of nickel silver and feature the long skirt associated with ‘50s era pickups.

Medium-mu twin triode of the 9 pin miniature type intended for use in the matrixing circuits of color television receivers. It can also be used in phase-inverter, multivibrator, and general-purpose amplifier applications

The Tornado Stealth 80 is the Neodymium counterpart of the ceramic powered Electric Lightning. The Stealth 80 is extremely efficient, with slightly scooped mids, and it shines in the cleanest as well as in the heaviest tonal applications. It delivers exceptional punch and attack, retaining all the clarity needed for palm-muted riffs and power chords, as well as crystal clear clean rhythm playing.

U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.

• 3.22 in. (82mm) stud spacing

A surface-mount version of P-QLM1458, this LM1458M dual op amp comes in an 8-pin surface-mount package. The LM1458 is a general purpose dual operational amplifier. The two amplifiers share a common bias network and power supply leads. Otherwise, their operation is completely independent. Features

• No Frequency Compensation Required
• Short-Circuit Protection
• Wide Common-Mode and Differential Voltage Ranges
• Low-Power Consumption
• 8-Lead TO-99 and 8-Lead PDIP
• No Latch Up When Input Common Mode Range is Exceeded

The premium subminiature type 5902 is a beam power pentode designed for use as an audio amplifier. It is intended for operation under conditions of severe shock, vibration, high temperature, and high altitude.

Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.

Basic front panel for Super Reverb. Material is .032" aluminum.

Beam power amplifier designed primarily for use in the output stage of a-c/d-c receivers. It has high power sensitivity and high efficiency at relatively low plate and screen voltages.

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 41mm (1 5/8") Radius: 360mm Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

The same innovative engineering and classic design as the Original Locking Rotomatics®, but with smaller buttons for those who prefer a little more space for their fingers. Gear ratio is 18:1.
Contains 3 treble and 3 bass

(Non-serialized) Bridge Plate. Used on American Vintage Series Telecaster® guitars manufactured from 1986 to the present. Mounting hardware included.
The standard version comes with 3 brass vintage Tele® saddles and the Road Worn version features three vintage steel saddles.

Miniature type triode-pentode designed for use as an AF amplifier by triode section and AF power amplifier by pentode section in radio receivers.

Dissimilar double triode utilizing the 9T9 bulb and pin configuration. The tube is designed to serve as a combined vertical deflection oscillator and amplifier.

XLR 3 pole female, stamped gold plated contacts, black finish. Features:

• Unique Australian designed shell and housing
• Ergonomic stylish sleeve design for improved grip
• Oversized latch lever preserves your thumb
• Leading first mate last break pin 1 on socket connectors
• Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable
• Overmolded cable support boot
• New socket contact design for improved contact resistance
• Precision machined pin contacts
• Compact 2.5mm (14AWG) solder buckets to reduce soldering time and

2-pole 1/4" professional right-angle phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

The Tornado Stealth 100 is the original Tornado 12, the first of the new generation of Neodymium speakers in the Jensen offering with an added stylish bell cover over the magnet. Possibly the most versatile Jensen speaker ever, it has clear, almost HD top end, well-balanced midrange and powerful bass end. It lends itself to a wide range of musical genres, with a smooth, never aggressive personality, from fast solo runs, to complex chordal harmonies, to soulful lead tones.

Designed for use on thin hollow body and semi-hollowbody guitars Bigsby B50 Specifications

• Model Name: B-50
• Series: Licensed Line
• Manufacturing Method: Die Cast
• Manufacturing Material: Aluminum
• Approximate weight: 290 grams/10.2 oz.
• Overall Length: 4 5/16" / 109.5 mm
• Overall Width: 3 13/16" /96.8 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Totally professional in design and performance. Small and lightweight, this precision machine fits guitar headpieces that will not take full size machines. The mini buttons provide more space for players' fingers (even larger fingers) to tune strings. Gear ratio is 14:1. Sealed-in lubrication keeps Mini-Rotomatics perfect for a lifetime! Includes ⅝" washers, bushings and wood screws.

• Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
• Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
• Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.