You are here

Clearance Items

Filter these results

Pages

(16 pages)
S-T233-XDrill Bit - two step, for installing vintage tuners

Two-step drill bit for drilling two-step holes. HSS material. Can be used to install vintage type tuners.


$69.95
$62.95
You save: 10%
Click to read more
K-101AKit - Pine Board Power Supply with 3 Outputs

Input - 120V, 60 Hz. "A" Output - Adjustable and regulated 1.5 to 7.5 volts 1.5 Amps "B" Output - 22, 45, 67, 90, and 135 volts regulated up to 50mA. "C" Output - Adjustable 0 to 22 volts. Regulated. Kit includes transformer, rectifiers, capacitors, resistors, transistors, I.C., regulator, white pine board, and all necessary hardware. Easy to follow instructions for assembly.


$64.95
$58.46
You save: 10%
Click to read more
K-998Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack

Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.


$64.95
$58.46
You save: 10%
Click to read more
Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
$99.90
$49.95
You save: 50%
Click to read more
S-T251Neck Support - 2-Way, for guitar work

2-Way Neck Support for guitars. This natural wood, swing design neck support is great for any guitar shop front counter or repair bench and can be used for inspection or repairs of different sized guitars/basses with ease. No need for separate neck supports when switching between acoustic and electric guitars!



  • 2 way adjustable height is compatible with acoustic and electric guitars/basses
  • Large (15cmx15cm) square base keeps the guitar stable and steady during repair
  • Natural cork used at guitar contact points.

$55.00
$49.50
You save: 10%
Click to read more
P-QOPAMPDDOp-Amp - Orange, Dual Discrete, Low-Noise, 8-Pin DIP

The Dual Discrete op-amp is specially designed for audio and is among the most musical sounding dual discrete op-amps out there. It is available in DIP 8 format and can be used in any CD player, DAC, or preamplifier that currently runs DIP 8 based IC dual op-amp types. The overall soundstage and transient detail will be greatly improved when used in pretty much all audio equipment that it can physically be fitted to. It has a very low noise Jfet front end so it can run with input impedances above 1M Ohms if needed. It can replace the following, provided the equipment it’s being used in has 22mm of height clearance and 5mm side clearance (per side).



  • OPA2604
  • OPA2134
  • TL072
  • NE5532
  • LM4562
  • OP275
  • OP285


Please check that the PSU can supply the extra current needed, especially if replacing more than one existing IC op-amp with our op-amp as with all discrete types, they do draw more current.


$55.00
$49.50
You save: 10%
Click to read more
P-GHP-6XIntonation System - Hollow Point, 6 String
Package of 6
Colors Available:

Hollow Point® Intonation System for Double Locking Tremolos. For 6 string guitar. The Hollow Point® Intonation System is designed for use with most Floyd Rose® style/licensed and Ibanez® Edge double locking tremolos where the fine tuner makes direct contact with the string lock screw. Multiple color options available.


$54.95
Starting at $49.45
You save: 10%
Click to read more
P-GV5-JAM-XVibramate - V5 JAM Mounting, For Jazzmaster and Jaguar
Colors Available:

Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.


$53.95
Starting at $48.55
You save: 10%
Click to read more
K-956Effects Pedal Kit - MOD® Kits, Thunderdrive Deluxe LTD

The Thunderdrive Deluxe LTD is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting output and distortion controls provides a wide variety of tones in spite of its simple construction. It is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. This version is equipped with a three position diode selector switch.



The switch offers three different settings and tones. The top position is the classic silicon clipping diodes used in the original Thunderdrive. The middle position gives you the lifted diode "turbo" sound from the Deluxe model. The bottom position is a new setting limited to this version using germanium diodes for a warm vintage distortion.


$49.95
$44.96
You save: 10%
Click to read more
Vacuum Tube - 6012, Tetrode, Thyratron
Isa negative control, xenon filled, four electrode thyratron designed for use in relay and grid-controlled rectifier applications. One type 6012 will carry 0.5 ampere in motor-control and in inverter service.
$89.90
$44.95
You save: 50%
Click to read more

Pages

(16 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Clearance Items