Clearance Items

High-mu power output triode designed for service in dynamic coupled circuits using a type 76, 6P5GT/G or 6J5GT/G as a driver. Two 6AC5Gs may be used as a zero bias class B amplifier.

Combination Drive, Colored Head Binding Screws, 6mm, M3, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

The JJ Electronic EF806S is a high quality reproduction of the classic EF86. This pentode features a robust construction with the internal shielding used in the original tubes. The JJ EF806 can be used in any EF86 circuit including microphones and amplifiers.

Sovtek 6A3 power triode tube. Made in Russia.

2-pole 1/4" professional straight phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

• Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
• Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
• Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.

Genuine Bigsby® conventional Telecaster bridge for use with Bigsby vibrato. This is the stock bridge assembly used in B16 vibratos.
2 13/16” stud spacing.

The Atten ST-862D high power hot air station. The ST-862D hot air station offers powerful heating with plenty of airflow in an affordable package with no compromises. Professionals have done detailed comparisons with machines more than three times the price and have found that the ST-862D performs just as well or better. The ST-862D is a great choice for beginners looking to learn SMD soldering and is also a great choice for those looking to upgrade their current setup.

Variable-mu pentode amplifier in the octal glass construction. It is suitable for use with AVC in RF and IF amplifier and minimizes cross modulation.

The AlNiCo P12N is surely one of the most iconic Jensen speakers of the late ‘50s. Visually impressive because of the big bell cover on the magnet, it is the highest powered 12” speaker in the range. Among others, the P12N was used in the high-end amps of the time such as the Fender® Tweed Twin. Crystal clear in the treble range with transparent mids and powerful but tight bass, it is the “King of Clean Tones”.

Miniature sharp cutoff pentode designed for use where only low plate and screen voltages are available. The 6AJ5 is especially suitable for operation at high frequencies.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Standard mounting post style. Hardware included.

XLR 3 pole female, stamped gold plated contacts, black finish. Features:

• Unique Australian designed shell and housing
• Ergonomic stylish sleeve design for improved grip
• Oversized latch lever preserves your thumb
• Leading first mate last break pin 1 on socket connectors
• Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable
• Overmolded cable support boot
• New socket contact design for improved contact resistance
• Precision machined pin contacts
• Compact 2.5mm (14AWG) solder buckets to reduce soldering time and

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.

New Old Stock (N.O.S.) tube. 25CD6GB is identical to the 6CD6GA except with different heater ratings. Beam power tube, octal base.

• Primary: Universal - 100, 110, 120, 200, 220,230, 240 VAC 50/60 Hz.
  
  • NOTE: units are designed to operate with BOTH primary windings engaged.
  • See primary wiring information under resources.
• Bias Tap: 50 VAC tap from high voltage secondary C.T. (except part number P-T379WX - uses a separate 60VAC 0.2 Amp winding).
• Highpot tested: 2,000 VAC
• Faraday Copper Primary Shield: Our electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell).
• Windings: Concentric wound for low stray field and low noise.
• Models: This series is an upgrade from our P-T263-X range of units PLUS 2 models designed specifically for 300B tubes (Part Number P-T300BX) and 2A3 tubes (Part Number P-T302AX).
• Finish: Black powder paint to match our P-T1650X series of output transformers Units can be run full wave bridge or full wave C.T.
• Conservative designs - CSA certified (209651).

U.S. made and true to vintage specifications. Lightweight (35 grams) aluminum for added resonance. Steel studs included.
The aluminum wrap around bridge is true to vintage specifications. Made from light-weight aluminum to increase string definition and resonance on those instruments using darker tone woods like mahogany, while reducing weight. Each side is adjustable using the included hex set screws to dial in the intonation. Studs and hex wrench included.

I.C. hand lotion soothes dry, chafed skin caused by glove irritation and chemical contact. ESD-safe. Improves skin contact with wrist strap grounders. Contaminant-free, greaseless. Natural Non-Contaminating Static Dissipative Moisturizing Hand Lotion contains NO Silicones, Lanolin’s, Glycerin or Mineral Oils. Absorbs immediately into your skin and is greaseless. The IC Pre-gloving Moisturizer helps to relieve dermatitis, urticaria, “skin flaking”, chapping and other irritations due to regular use of gloves and will not degrade or weaken latex or Nitrile Gloves. Used in conjunction with wrist straps. Vitamins A, D & E lightly fragranced with all natural herbal steeped tea along with hints of grapefruit and lemon splashes.

• Helps to meet ANSI S20.20
• NSF E4 Certified for Food Handlers
• Static Dissipative and ESD Safe
• Helps Grounding to Wrist Straps
• CHG Compatible

Power-amplifier tube of the all-metal type for use in the output stage of transformerless (ac/dc) radio receivers, especially those designed to have ample reserve of power-delivering bilities.

Designed for use on Telecaster ® style guitars Bigsby B16 Specifications

• Model Name: B-16
• Series: Original Kalamazoo Line
• Manufacturing Method: Sand Cast
• Manufacturing Material: Aluminum
• Approximate weight: 333 grams/ 11.7 oz.
• Overall Length: 8 3/8"/ 212.7 mm
• Overall Width: 4 1/4"/107.9 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.

This is the left-handed version of the Bigsby B3 designed for use on thin electric hollow and semi-hollow guitars. Mounting screws, arm spring, and washer included.

100 V ceramic disc capacitors. ± 10% tolerance.

Alpha Mini Pots with solid shaft and short PC mount terminals.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 3.8 mm (0.150”)
• Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
• Lead Thickness: 0.5 mm (0.020”)