Clearance Items

Neck Support - 2-Way, for guitar work
2-Way Neck Support for guitars. This natural wood, swing design neck support is great for any guitar shop front counter or repair bench and can be used for inspection or repairs of different sized guitars/basses with ease. No need for separate neck supports when switching between acoustic and electric guitars!
  • 2 way adjustable height is compatible with acoustic and electric guitars/basses
  • Large (15cmx15cm) square base keeps the guitar stable and steady during repair
  • Natural cork used at guitar contact points.
$55.00
Speaker - Jensen Smooth Bass, 15", BS15N350A, 350W, 8Ω
The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.
$347.10
Bridge - Hipshot, 4-string Type A Bass, brass and chrome
Retrofits your Fender five hole mount bridge on your 4 string bass using the two outer holes and the center hole. The type A saddles feature variable string spacing adjustment for even greater versatility and fine intonation adjustment as well. 4 String Bass Bridge. Type A Fender Mount (3 Mounting Holes). Non-string-through.
$100.00
Tremolo Arm - Gotoh, F3, Internal Threading
Colors Available:
Genuine Gotoh tremolo arm with internal M4 threading. Compatible with Gotoh GE1996T tremolos and others that require an internal M4 thread.
Starting at $5.78
Tuners - Gotoh, SD510, gold, keystone knob, 3 per side
Package of 6
Colors Available:
Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD510 series solves these problems by combining “Rock-solid"™ technology and the post collar or: “self-center guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD510 series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through it is use of the ideal materials selected for each component part you also obtain a far superior sound. 1:15 gear ratio.
$64.95
Tuner - Hipshot, Enclosed Gear Classic, Nickel
Hipshot's New Classic Closed (enclosed gear) Guitar Tuners posses the precision, craftsmanship and technology you have come to expect from Hipshot Products.
  • 16:1 gear ratio for finer tuning
  • Schaller M6L Mini footprint.
  • The option for staggered post configuration means you can increase your headstock's break angle, remove buzz at the nut and ditch your pesky string tree!
$9.35
Amp Cover - For Fender Blues Deluxe
Vintage style using only the finest tolex available.
  • Height: 18.5"
  • Width: 24"
  • Depth: 11"
$22.95
Amp Cover - Orange, for Amplifier Heads
Orange™ amp head cover. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo. Versions available for:
  • CR120H
$28.82
Save 15%
Originally: $33.90
Drill Bit - two step, for installing vintage tuners
Two-step drill bit for drilling two-step holes. HSS material. Can be used to install vintage type tuners. 7.8 mm inner diamter, 9.9 mm outer diameter.
$59.46
Save 15%
Originally: $69.95
Vacuum Tube - 12AX7, Peavey
Peavey 'Super 7' 12AX7
$20.50
Intonation System - Hollow Point, 6 String
Package of 6
Colors Available:
Hollow Point® Intonation System for Double Locking Tremolos. For 6 string guitar. The Hollow Point® Intonation System is designed for use with most Floyd Rose® style/licensed and Ibanez® Edge double locking tremolos where the fine tuner makes direct contact with the string lock screw. Multiple color options available.
Starting at $54.95
Strap locks - Grover, 5-pointed Star style
Package of 2
Colors Available:
These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design lets the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.
$11.01
Save 15%
Originally: $12.95
Nut - Gold Tone, Zero Glide Blank (Unslotted)
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Intonation Large pitch deviation in early frets. (See intonation graph below) Minimal pitch deviation in early frets.
$24.00
Knob Kit - Various Amp Knobs, 61 Pieces
Package of 61
61 piece amp knob kit. Kit contains the following knobs:
  • 8 × Black Skirted (P-K314-1)
  • 7 × Black Chickenhead (P-K300 )
  • 7 × White Vintage (P-K315-1)
  • 7 × Brown Vintage (P-K316-1)
  • 7 × Black Vintage (P-K325)
  • 7 × Black with Gold Cap (P-K339)
  • 7 × Black with Silver Cap, short (P-K341)
  • 4 × Black with Gold Cap (P-K340)
  • 4 × Black with Silver Cap (P-K342)
  • 3 × Black Scalloped (P-K345)
$92.00
PadBoard - Double Sided, Plated Holes, 6.30” x 3.94”, Mounting Holes
The PadBoard-3U prototyping circuit board has a general purpose pad-per-hole pattern which is good for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. The PCB accepts a 96 pin DIN-41612 VME connector for backplane or board-to-board applications. Holes for ejector latches are provided. Features
  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
$12.95
Transistor - Peavey, PNP 180V Output, SJ-73180, 180V, 3A
SJ-73180 (MJ21193), PNP output, 180V, 3A, TO-3 Case.
$8.50
DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
$32.00
Reverb Tank - Tube Amp Doctor, 4BB3C1B, Long Decay, 2-Spring
  • Replaces: 4BB3C1B
  • Solid, sturdy construction
  • Type: Long (2 Spring) tank
  • Decay: long decay
  • Input: 150 Ω
  • Output: 2,250 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down


Compatible amps include Fender® Blues Deluxe (original version), Blues Deville (original version), London Reverb, Studio Lead, Harvard Reverb II, Showman 115 (80’s version), Rivera™ Rake, Jake Studio Combo, and Fandango models, Laney™ VC30, Crate™ V-32 Palomino.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
$29.95
Punch - Greenlee, Chassis, for punching round holes
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
Starting at $73.35
Vacuum Tube - 26HU5, Beam Power Amplifier
Glass octal type used as horizontal-deflection amplifier in color television receivers.
$22.45
$124.95
Vacuum Tube - 6CT7 / EAF42, Pentode
Single diode, remote cut-off R.F. pentode.
$3.45
Save 50%
Originally: $6.90
Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
$49.95
Save 50%
Originally: $99.90
Driver - Jensen® Bass, 1", 8Ω, V 1/1
The V 1/1 Compression Driver is a 1" ferrite speaker with 16 watts of power.
$45.18