Clearance Items
Tuners - Grover, Mid-size Rotomatic, 6 in line
The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series features an 18:1 gear ratio for smoother, more precise tuning. This compact machine head is perfect for use on smaller and in-line headpieces.
Colors Available:
Starting at $46.75
package of 6
Tuners - Grover, Mid-size Rotomatic, 3 per side
The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series features an 18:1 gear ratio for smoother, more precise tuning. This compact machine head is perfect for use on smaller and in-line headpieces.
Colors Available:
Starting at $46.75
package of 6
Transformer - Hammond, Low Voltage / Filament, Enclosed, 12.6 VCT
- Primary 115 VAC, 60 Hz.
- Secondary 12 C.T.
- All secondaries center tapped, VAC (RMS)
- Enclosed, 4 hole chassis mount.
- Minimum 6" long leads.
- Dual bobbin design - no electrostatic shield required.
- Class B insulation (130 degrees C).
- Hi-Pot test of 2,000V RMS.
- UL listed (# E50394) & CSA certified (209651).
Starting at $43.87
Vacuum Tube - EF806 / EF86 / 6267, JJ Electronics, Long Plate
The JJ Electronic EF806S is a high quality reproduction of the classic EF86. This pentode features a robust construction with the internal shielding used in the original tubes. The JJ EF806 can be used in any EF86 circuit including microphones and amplifiers.
Starting at $43.25
Transformer - Hammond, Low Voltage / Filament, Enclosed, 5 VCT
- Primary 115 VAC, 60 Hz.
- Secondary 5 C.T.
- All secondaries center tapped, VAC (RMS)
- Enclosed, 4 hole chassis mount.
- Minimum 6" long leads.
- Dual bobbin design - no electrostatic shield required.
- Class B insulation (130 degrees C).
- Hi-Pot test of 2,000V RMS.
- UL listed (# E50394) & CSA certified (209651).
Starting at $42.78
Pickup - Gotoh, HB-Classic Alpha, Humbucker, Made In Japan
The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Starting at $42.43
Vacuum Tube - 30KD6, Beam Power Amplifier
Duodecar type used as horizontal-deflection amplifier in television receivers.
$39.90
Bridge - ABR-1, Wired, Brass Saddles
Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. ABR-1 bridge with the retaining wire and saddles plated to match the frame. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!
Colors Available:
Starting at $37.33
Tuners - Locking, Sealed, 45° Screw Mount, Oval Knob, 3 per side
Sealed rear-lock diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. This chrome finished configuration looks classic on both electric and acoustic guitars. The gear ratio is 19:1. All mounting hardware is included in this three per side tuner set.
$36.13
Save 15%
Originally: $42.50
Footswitch Box - Fender, Two Button (Channel, Chorus)
Two button Fender®, ¼" plug (channel & chorus).
$35.95
Save 18%
Originally: $43.75
Vibramate - V5 JAM Mounting, For Jazzmaster and Jaguar
Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.
Colors Available:
Starting at $34.58
Bridge - ABR-1, Wired, Plated Brass Saddles, USA
Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.
Colors Available:
- Post spacing: 2.93 inches (74.5mm)
- Radius: 12 inches (30.48cm)
- String Spacing: 10.4 mm
Starting at $32.92
Amp Cover - Orange, for Cabinets and Combos
Orange™ cabinet/combo covers. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo.
- Standard 1x12 fits RK30TC / CR60C / CVR-112 Combo
- Standard 2x12 fits AD30TC / RK50C / CR120
Starting at $32.64
Save 15%
Originally: $38.40
DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
- Guitar/ Keyboard/Bass amplifiers and combos
- Audio mixing consoles / Powered mixing consoles
- Stand -alone stereo effect units for studio and PA usage
- Effects pedals
$32.00
Bridge Set - Wraparound, Steel Studs
U.S. made and true to vintage specifications. Lightweight (35 grams) aluminum for added resonance. Steel studs included.
The aluminum wrap around bridge is true to vintage specifications. Made from light-weight aluminum to increase string definition and resonance on those instruments using darker tone woods like mahogany, while reducing weight. Each side is adjustable using the included hex set screws to dial in the intonation. Studs and hex wrench included.
Colors Available:
The aluminum wrap around bridge is true to vintage specifications. Made from light-weight aluminum to increase string definition and resonance on those instruments using darker tone woods like mahogany, while reducing weight. Each side is adjustable using the included hex set screws to dial in the intonation. Studs and hex wrench included.
Starting at $31.21
Vacuum Tube - 6CB5A, Beam Power Amplifier
High perveance beam power pentode in a T-12 glass envelope. It is designed especially for use as a horizontal-deflection amplifier in color television receivers. The 6CB5A is unilaterally interchangeable with the 6CB5.
$29.90
Chassis Box - Hammond, 26827PSLA, Eddystone 1590D, Diecast, 7.4” x 4.7” x 2.2”
Eddystone 26827PSLA enclosure with similar dimensions to the Hammond 1590D enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590D style builds.
- Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
- Aluminum alloy to BS1490, LM2M - supplied in natural finish.
- Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
- Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
- Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
- Countersunk lid holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$28.95
Pickguard - Fender®, for American Standard P-Bass, 13-hole
Original Fender® pickguard replacement, 3-ply, for American Precision Bass. This pickguard fits American, American Standard, American Vintage, Standard and Deluxe series Precision Bass models (does not fit five-string Precision models).
Colors Available:
Starting at $27.65
Nut - Gold Tone, Zero Guide Slotted
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.
$26.95
Transformer - Hammond, Low Voltage / Filament, Open, 30 VCT
- Primary 115 VAC, 60 Hz.
- Secondary 30 C.T.
- Center tapped secondary.
- Open style, channel bracket, two hole chassis mount.
- Minimum 6" long leads.
- Dual bobbin design - no electrostatic shield required.
- Class B insulation (130 degrees, C).
- Hi-Pot test of 2,000 V RMS.
- UL listed (# E50394) & CSA certified (# LR3902).
Starting at $26.35
Tuners - Vintage Style Stamped, Oval Knob, 6 on plate
Vintage style stamped tuning machine set with solid metal oval buttons mounted on a plate. These nickel finished tuners look great on vintage and Fender® style guitars. The gear ratio is 15:1. All mounting hardware is included in this six on a plate tuner set.
$25.46
Save 15%
Originally: $29.95
Bridge - Wraparound, Vintage Spec, Aluminum, USA
U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.
Colors Available:
- 3.22 in. (82mm) stud spacing
Starting at $25.25
Pickguard - Strat® style, 11 hole, Anodized Aluminum
Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.
Colors Available:
$24.95
Vacuum Tube - 930, Photocell, Sound
New Old-Stock (N.O.S.) tube. The 930 is a gas phototube sensitive to red through infrared light.
$24.95