Clearance Items

Wipes - Tuff Wipes, Hand and Surface Towels
Pack of 75 Tuff Wipes for use on hands and cleaning surfaces. 9 1/2 x 12" sized sheets.
  • Easy-to-use textured wipes help clean up in a hurry.
  • Economical. Tough on grease, gentle on hands and surfaces.
  • Recommended for cleaning up paints, adhesives and lubricants.
$16.95
Chemical Polishing File - Flat, clean tooth pattern
CP files have special file tooth pattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.
Starting at $17.45
Locking Nut - Gotoh, FGR-2, for Floyd Rose Style Tremolos, Top Mount, 41mm
Colors Available:
Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 41mm (1 5/8") Radius: 360mm Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.
Starting at $17.95
Save 3%
Originally: $18.55
Chassis Box - Hammond, 29830PSLA, Eddystone 1590BB, Diecast, 4.7” x 3.7” x 1.3”
Eddystone 29830PSLA enclosure with similar dimensions to the Hammond 1590BB enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590BB style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$18.95
Pickguard - Fender®, Vintage '50s Strat, 8-Hole
Colors Available:
Original Fender® pickguard. This vintage-style pickguard fits many 1950s-style American Vintage, Hot Rod, Road Worn®, Classic Player and Classic series Stratocaster guitars with three single-coil pickups.
Starting at $19.85
Pickguard - Fender®, for American Telecaster, 8-hole
Colors Available:
Fits most American Telecasters. This modern pickguard fits American, American Standard, American Deluxe, American Special, Highway One™, Road Worn®, Deluxe Player, Blacktop, Standard and Deluxe series Telecaster guitars (also fits Squier® Standard series Telecaster models 2004-present).
Starting at $19.85
Vacuum Tube - 6883B / 8552, Beam Power Amplifier
Beam power tube - high power sensitivity RCA "Dark Heater" with 12 to 15 volt range.
$19.90
Vacuum Tube - 6T9, Triode, Pentode
Duodecar type tube used in audio-frequency circuits. The triode unit is used as a voltage amplifier; the pentode unit is used as a power amplifier.
$19.90
Panel - aluminum, front, for Super Reverb
Basic front panel for Super Reverb. Material is .032" aluminum.
$19.95
Vacuum Tube - 26HU5, Beam Power Amplifier
Glass octal type used as horizontal-deflection amplifier in color television receivers.
$22.45
Pickguard - Fender®, for American Stratocaster, 11-hole
Colors Available:
Fits most American and Mexican stratocasters. 3 ply standard 11 hole pickguard. Fits 3 single coil pickukps.
Starting at $23.35
Vacuum Tube - 6AB5 / 6N5, Indicator, Electron Ray
Triode using the miniature construction. Its low capacitance and high ratio of plate current to transconductance allow use as a high frequency oscillator and mixer at frequencies below ~300 mc or as grounded grid radio frequency amplifier.
$24.90
Vacuum Tube - 930, Photocell, Sound
New Old-Stock (N.O.S.) tube. The 930 is a gas phototube sensitive to red through infrared light.
$24.95
Pickguard - Strat® style, 11 hole, Anodized Aluminum
Colors Available:
Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.
$24.95
Bridge - Wraparound, Vintage Spec, Aluminum, USA
Colors Available:
U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.
  • 3.22 in. (82mm) stud spacing
Starting at $25.25
Transformer - Hammond, Low Voltage / Filament, Open, 30 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 30 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
Starting at $26.35
Note: P-T166E30: 4.5 is a special order item.
Nut - Gold Tone, Zero Guide Slotted
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.
$26.95
Pickguard - Fender®, for American Standard P-Bass, 13-hole
Colors Available:
Original Fender® pickguard replacement, 3-ply, for American Precision Bass. This pickguard fits American, American Standard, American Vintage, Standard and Deluxe series Precision Bass models (does not fit five-string Precision models).
Starting at $27.65
Vacuum Tube - 6CB5A, Beam Power Amplifier
High perveance beam power pentode in a T-12 glass envelope. It is designed especially for use as a horizontal-deflection amplifier in color television receivers. The 6CB5A is unilaterally interchangeable with the 6CB5.
$29.90
Bridge Set - Wraparound, Steel Studs
Colors Available:
U.S. made and true to vintage specifications. Lightweight (35 grams) aluminum for added resonance. Steel studs included.
The aluminum wrap around bridge is true to vintage specifications. Made from light-weight aluminum to increase string definition and resonance on those instruments using darker tone woods like mahogany, while reducing weight. Each side is adjustable using the included hex set screws to dial in the intonation. Studs and hex wrench included.
Starting at $31.21
Amp Cover - Orange, for Cabinets and Combos
Orange™ cabinet/combo covers. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo.
  • Standard 1x12 fits RK30TC / CR60C / CVR-112 Combo
  • Standard 2x12 fits AD30TC / RK50C / CR120
Starting at $32.64
Save 15%
Originally: $38.40
Bridge - ABR-1, Wired, Plated Brass Saddles, USA
Colors Available:
Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $32.92
Vibramate - V5 JAM Mounting, For Jazzmaster and Jaguar
Colors Available:
Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.
Starting at $34.58
Footswitch Box - Fender, Two Button (Channel, Chorus)
Two button Fender®, ¼" plug (channel & chorus).
$35.95
Save 18%
Originally: $43.75