Clearance Items

Transistor - Peavey, NPN 140V Driver, SJ-81180, 180V, 1A
SJ-81180, NPN driver transistor. 180V, 1A, TO-3 Case.
$8.25
Vacuum Tube - 12DQ7, Pentode, Sharp Cut-Off
Miniature power pentode primarily designed for use as the video output amplifier in television receivers. Features of the tube include high transconductance, low interelectrode capacitances, and high power sensitivity.
$6.90
Vacuum Tube - 37, Triode
General purpose triode designed for service as an oscillator, detector, or amplifier.
$14.90
Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
$34.98
Save 50%
Originally: $69.95
Vacuum Tube - 8950, Pentode, Power Amplifier
Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.
$199.90
XLR Plug - Amphenol, female, thermoplastic, black
XLR 3 Pole female audio cable connector. Musician range. Black finish, silver contact plating. "Jaws" cable retention system.
$2.92
XLR Plug - Amphenol, Thermoplastic, Stamped
XLR 3 pole male, stamped contacts, thermoplastic shell, jaws cable clamp. Plastic. Features:
  • Thermoplastic shell
  • Solder Bucket connections
  • "Jaws" Cable Retention System
  • Stamped contacts
  • Leading first mate last break socket contact
  • Quick and easy assembly without screws
$2.48
XLR Plug - Amphenol, Thermoplastic, Machined Contacts
XLR 3 pole male, stamped contacts, thermoplastic shell, jaws cable clamp. Plastic. Features:
  • Thermoplastic shell
  • Solder Bucket connections
  • "Jaws" Cable Retention System
  • Precision machined contacts
  • Leading first mate last break socket contact
  • Quick and easy assembly without screws
$3.38
¼" Plug - Amphenol T-Series, Mono, Nickel
Amphenol "T-Series (Pro Range)" Phone Plug. 1/4" Mono straight plug with large Jaws cable clamp, metal backshell and black finish. Internal cable clamp fits cable outer diameters ranging from 0.236” to 0.295” (6 mm to 7.5 mm).
$8.25
Bridge - Hipshot, 4-string Type A Bass, brass and chrome
Retrofits your Fender five hole mount bridge on your 4 string bass using the two outer holes and the center hole. The type A saddles feature variable string spacing adjustment for even greater versatility and fine intonation adjustment as well. 4 String Bass Bridge. Type A Fender Mount (3 Mounting Holes). Non-string-through.
$100.00
Out of Stock
Tuners - Gotoh, GB10, for Bass, 4 In Line, Nickel
Package of 4
Gotoh’s GB10 bass tuners are a classic bass tuner set that can be found on many basses, new and old. These tuners are used on both vintage Fender® guitars and new production models sold today. Please check dimensions below for compatibility. The clover shape tuning keys, 20:1 gear ratio, Gotoh’s inner friction free ring, and a solid footprint mount make these a great option for any bass guitar. Mounting screws and press fit bushings are included with this set.
$62.21
Tuners - Gotoh, SD510, gold, round knobs, 3 per side
Package of 6
Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD510 series solves these problems by combining “Rock-solid"™ technology and the post collar or: “self-center guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD510 series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through it is use of the ideal materials selected for each component part you also obtain a far superior sound. 1:15 gear ratio.
$64.95
Tuner - Hipshot, Enclosed Gear Classic, Nickel
Hipshot's New Classic Closed (enclosed gear) Guitar Tuners posses the precision, craftsmanship and technology you have come to expect from Hipshot Products.
  • 16:1 gear ratio for finer tuning
  • Schaller M6L Mini footprint.
  • The option for staggered post configuration means you can increase your headstock's break angle, remove buzz at the nut and ditch your pesky string tree!
$9.35
Parts Kit - Grover, Bushings, Washers, Screws
Package of 564
Bushings, washers and screws for Grover® Machine Heads.
$103.06
Save 41%
Originally: $175.00
Nut - Gold Tone, Zero Glide Blank (Unslotted)
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Intonation Large pitch deviation in early frets. (See intonation graph below) Minimal pitch deviation in early frets.
$24.00
Vibramate - Standard Kit, Left-Handed, For Bigsby B5
Colors Available:
Vibramate Left Handed V5 Adapter Mounting Kit, For Bigsby B5 Now you can install a Bigsby Vibrato on your guitar without drilling any holes! The Vibramate Left Hand V5 Model Quick Mount Kit is designed for a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar. The unit automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance.
$99.95
Pickup - Fender®, Humbucking with engraved logo, '72 Tele
Overwound Tele pickups constructed with AlNiCo 5 magnets and enamel coated magnet wire. These feature the classic style of the FenderⓇ wide range humbuckers. DC resistance = 8.4K.
$54.65
DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
$32.00
Reverb Tank - Tube Amp Doctor, 4BB3C1B, Long Decay, 2-Spring
  • Replaces: 4BB3C1B
  • Solid, sturdy construction
  • Type: Long (2 Spring) tank
  • Decay: long decay
  • Input: 150 Ω
  • Output: 2,250 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down


Compatible amps include Fender® Blues Deluxe (original version), Blues Deville (original version), London Reverb, Studio Lead, Harvard Reverb II, Showman 115 (80’s version), Rivera™ Rake, Jake Studio Combo, and Fandango models, Laney™ VC30, Crate™ V-32 Palomino.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
$29.95
Wrench Set - Boxed Set, assorted sizes
Package of 78
Includes 12 pieces each of 1.27mm, 1.5mm, 2.0mm, 2.5mm, 6 pieces each of 3.0mm, 4.0mm, 5.0mm, 7.0mm, 8.0mm
$67.95
Vacuum Tube - 12AF6, Pentode
Miniature pentode intended for use as a radio-frequency or intermediate frequency amplifier in automobile radio receivers. The tube is specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.
$3.90
Vacuum Tube - 6CN7, Dual Diode, Triode
Duplex-diode high-mu triode in which separate cathodes are provided for the diode and triode sections. The tube is primarily intended for service as a combined horizontal phase detector and reactance tube in television receivers.
$2.45
Save 50%
Originally: $4.90
Vacuum Tube - 6GT5-A, Beam Power Amplifier
Beam power tube for horizontal deflection amplifier service in black-and-white TV receivers.
$13.95
Vacuum Tube - 6MJ6, Beam Power Pentode
Novar type beam power tube used as a horizontal-deflection amplifier in color and black-and-white television receivers.
$99.90