Clearance Items

Vacuum Tube - 6AC5GT, Triode, Power Amplifier
High-mu power output triode designed for service in dynamic coupled circuits using a type 76, 6P5GT/G or 6J5GT/G as a driver. Two 6AC5GTs may be used as a zero bias class B amplifier.
$12.90
Vacuum Tube - 6AJ5, Pentode, Sharp Cut-Off
Miniature sharp cutoff pentode designed for use where only low plate and screen voltages are available. The 6AJ5 is especially suitable for operation at high frequencies.
$6.25
Vacuum Tube - 6B8G, Dual Diode, Pentode
Consists of two diodes and a pentode utilizing a common cathode. It is designed for service as a combined detector, AVC rectifier, and pentode amplifier.
$4.90
Vacuum Tube - 6BN6 / 6KS6, Discriminator, Gated Beam
Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.
$2.45
Save 50%
Originally: $4.90
Vacuum Tube - 6CB5A, Beam Power Amplifier
High perveance beam power pentode in a T-12 glass envelope. It is designed especially for use as a horizontal-deflection amplifier in color television receivers. The 6CB5A is unilaterally interchangeable with the 6CB5.
$29.90
Vacuum Tube - 6CK4, Triode
Low-mu triode designed for use as the vertical deflection amplifier in television receivers.
$12.90
Vacuum Tube - 6EW7, Dual Triode, Dissimilar
Dissimilar double triode utilizing the 9T9 bulb and pin configuration. The tube is designed to serve as a combined vertical deflection oscillator and amplifier.
$7.90
Vacuum Tube - 6GT5-A, Beam Power Amplifier
Beam power tube for horizontal deflection amplifier service in black-and-white TV receivers.
$13.95
Vacuum Tube - 6GU7, Dual Triode, Medium MU
Medium-mu twin triode of the 9 pin miniature type intended for use in the matrixing circuits of color television receivers. It can also be used in phase-inverter, multivibrator, and general-purpose amplifier applications
$7.90
Vacuum Tube - 6JM6-A, Beam Power Amplifier
Duodecar type used as a horizontal-amplifier tube in color and black-and-white television receivers.
$4.95
Vacuum Tube - 6JZ6, Beam Power Amplifier
Compactron beam-power pentode designed for use in the horizontal deflection amplifier in television receivers. A separate connection is provided for the beam plates to minimize "snivets".
$8.90
Vacuum Tube - 6M11, Triode, Dual - Pentode
New-Old-Stock (NOS) tube. Compactron twin-triode pentode.
$8.05
Vacuum Tube - 6SH7GT, Pentode, Sharp Cut-Off, RF
Triple grid sharp cut-off amplifier. It is designed for service in high gain RF and IF amplifier applications and for limited service in FM receivers. The double cathode connection is useful in reducing cathode circuit coupling.
Starting at $4.50
Vacuum Tube - 6T9, Triode, Pentode
Duodecar type tube used in audio-frequency circuits. The triode unit is used as a voltage amplifier; the pentode unit is used as a power amplifier.
$19.90
Vacuum Tube - 6Y6GT, Beam Power Amplifier
Beam power pentode primarily intended for use as an audio frequency power amplifier. It is particularly useful in applications where the available supply voltage is relatively low.
$5.90
Vacuum Tube - 7308 / E188CC, Dual Triode
Special quality double triode designed for use as cascode amplifier, cathode follower, etc. in RF and AF circuits.
$99.90
$49.90
Vacuum Tube - 826, Triode, Power Amplifier
Transmitting triode for operation at maximum ratings up to 250 Mc.
$48.80
Vacuum Tube - 930, Photocell, Sound
New Old-Stock (N.O.S.) tube. The 930 is a gas phototube sensitive to red through infrared light.
$24.95
Vacuum Tube - AZ41, Rectifier, Full Wave
High vacuum full wave rectifying tube.
$6.45
Save 50%
Originally: $12.90
Vacuum Tube - EF806 / EF86 / 6267, JJ Electronics, Long Plate
The JJ Electronic EF806S is a high quality reproduction of the classic EF86. This pentode features a robust construction with the internal shielding used in the original tubes. The JJ EF806 can be used in any EF86 circuit including microphones and amplifiers.
Starting at $43.25
Vibramate - V5 JAM Mounting, For Jazzmaster and Jaguar
Colors Available:
Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.
Starting at $34.58
Vibrato - Bigsby, B12, for arch-top electric guitars
Colors Available:
Designed for use on arched top electric guitars Bigsby B16 Specifications
  • Model Name: B-12
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Sand Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 344 grams/12.1 oz.
  • Overall Length: 8 3/8" / 212.7 mm
  • Overall Width: 3 5/8" / 92.1 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench
Starting at $179.99
Note: P-GB12-A: Aluminum is a special order item.
Vibrato - Bigsby, B3, for Thin Hollow and Semi-Hollow, Left-Handed
This is the left-handed version of the Bigsby B3 designed for use on thin electric hollow and semi-hollow guitars. Mounting screws, arm spring, and washer included.
$199.99