Clearance Items

Bridge - ABR-1, Wired, Brass Saddles
Colors Available:
Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. ABR-1 bridge with the retaining wire and saddles plated to match the frame. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!
Starting at $37.33
Vacuum Tube - 30KD6, Beam Power Amplifier
Duodecar type used as horizontal-deflection amplifier in television receivers.
$39.90
Transformer - Hammond, Low Voltage / Filament, Enclosed, 5 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 5 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
Starting at $42.78
Vacuum Tube - EF806 / EF86 / 6267, JJ Electronics, Long Plate
The JJ Electronic EF806S is a high quality reproduction of the classic EF86. This pentode features a robust construction with the internal shielding used in the original tubes. The JJ EF806 can be used in any EF86 circuit including microphones and amplifiers.
Starting at $43.25
Transformer - Hammond, Low Voltage / Filament, Enclosed, 12.6 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 12 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
Starting at $43.87
Tuners - Grover, Mid-size Rotomatic, 6 in line
Colors Available:
The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series features an 18:1 gear ratio for smoother, more precise tuning. This compact machine head is perfect for use on smaller and in-line headpieces.
Starting at $46.75
package of 6
Tuners - Grover, Mid-size Rotomatic, 3 per side
Colors Available:
The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series features an 18:1 gear ratio for smoother, more precise tuning. This compact machine head is perfect for use on smaller and in-line headpieces.
Starting at $46.75
package of 6
Tuners - Grover, Mini Rotomatic, 3 per side
Colors Available:
Totally professional in design and performance. Small and lightweight, this precision machine fits guitar headpieces that will not take full size machines. The mini buttons provide more space for players' fingers (even larger fingers) to tune strings. Gear ratio is 14:1. Sealed-in lubrication keeps Mini-Rotomatics perfect for a lifetime! Includes ⅝" washers, bushings and wood screws.
Starting at $46.75
package of 6
Bridge - Bigsby, Telecaster conventional
Colors Available:
Genuine Bigsby® conventional Telecaster bridge for use with Bigsby vibrato. This is the stock bridge assembly used in B16 vibratos.
2 13/16” stud spacing.
$46.95
Bridge / Tailpiece - Gotoh, 510UB, Combination, Stud Mount
Colors Available:
Stud Mount Adjustable Bridge, Hardware, 2-1/16" String, 3-¼" Stud. Hardware included.
Starting at $47.65
Vacuum Tube - 826, Triode, Power Amplifier
Transmitting triode for operation at maximum ratings up to 250 Mc.
$48.80
Tuners - Grover, Super Rotomatic, 3 per side
Colors Available:
The Super Rotomatic® has a 14:1 gear ratio. The 3 step button gives this machine a distinctive look and the sealed-in lubrication assures smooth gear-and-worm movement for the life of the machine.
Starting at $48.90
package of 6
$49.90
Transformer - Hammond, Global Use, Dual Primary 115/230 VAC
  • Dual primary 115/230 VAC
  • 50/60 Hz. operation
  • Dual secondaries for series or parallel connections
  • 4,000 V RMS Hipot test
  • Class F insulation (155 degrees, C)
  • Chassis mount
  • Dual bobbin construction
  • Dual use terminals
  • C UL US recognized (E207860)
  • TUV Type Approved
  • CE certified to IEC 950 (Approved to EN 60-742 Safety Isolating Transformers)
$50.95
Driver - Celestion, 1", CDX1-1445 Ferrite Compression, 20W, 8Ω
  • 1" exit lightweight and compact ferrite magnet compression driver with 1.4" copper clad aluminium voice coil
  • 20Wrms power handling (AES standard) and 106dB sensitivity
  • One piece PETP diaphragm and surround
  • Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design
  • Suitable for 2-way and 3-way systems
$51.50
Transformer - Fender® Replacement, Output, 50 W, 4 Ohm
Replacement for Bassman heads. Equivalent to #125A13A & #022871.
$53.58
Save 23%
Originally: $69.95
Nut Files - Double Edge, for guitars, 3 sizes
Double edge nut files featuring popular guitar gauges specially designed for slotting nuts. Each set of files is specifically designed for guitars of a particular type. This set of three files will cover the work of six and cuts a smooth round bottom slot. Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.
  • 4” cutting edge
  • Set of 3 files
  • Made In Japan
Starting at $53.65
package of 3
Partially Out of Stock
Tuners - Gotoh, SE700, gold, keystone knob, 3 per side
Colors Available:
Set of 6 tuners - 3 per side with keystone knob. 1:15 gear ratio. Hardware included.
Starting at $53.81
package of 6
Bridge - Gotoh, 205B-5, Vintage, 5-String Bass, Brass Saddles, Chrome
Direct replacement for most Fender 5 String P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included. Hardware included.
$54.95
Radio Kit - 2 Tube Regenerative Radio
This radio kit will cover the AM radio band along with the SW radio band. Power for this receiver is 1.5 V DC for the filaments and 45V DC for the plate current. A D cell and five 9V transistor batteries wired in series will work to power this radio. A 2000 ohm headset or an audio amplifier is required. Requires two T-1T4_DF91 tubes (not included).
$54.95
Bridge - Fender®, 3-Saddle, for Vintage Telecaster, Chrome
(Non-serialized) Bridge Plate. Used on American Vintage Series Telecaster® guitars manufactured from 1986 to the present. Mounting hardware included.
The standard version comes with 3 brass vintage Tele® saddles and the Road Worn version features three vintage steel saddles.
Starting at $55.95
Pickup - Kent Armstrong, Icon 57, Strat (Alnico 3)
Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.
  • Magnet Type = Alnico 3 pole pieces
  • D.C. Resistance = 5.92k Ohms
  • Inductance (henrys) = 3.61
  • Wire Type = Formvar AWG 42
  • Lead Type = cloth insulated 2 conductor
  • Polarity = normal
Starting at $56.95
Tuners - Grover, Mini Lock Rotomatic, 3 per side, 18:1
Colors Available:
The same innovative engineering and classic design as the Original Locking Rotomatics®, but with smaller buttons for those who prefer a little more space for their fingers. Gear ratio is 18:1.
Contains 3 treble and 3 bass
Starting at $57.39
package of 6
Tuners - Gotoh, 35G1800, Classical Guitar, Engraved Solid Brass
Colors Available:
Gotoh’s 35G1800 classical tuners feature a solid brass construction with an engraved vine design. These parts are born from Gotoh’s latest, state of the art manufacturing processes. In order to breathe life into these parts and build the finest machine heads in the world, they are exquisitely finished by skilled artisans, with absolutely no compromise. The work of craftsmen on each individual part has gained the classic machine heads of this series, critical acclaim and trustworthiness in the eyes of musicians all over the world. These feature a 14:1 gear ratio for great tuning stability. Mounted 3-per-plate, 2 plates. Mounting hardware included.
Starting at $57.75
package of 6