Clearance Items

Replacement for Bassman heads. Equivalent to #125A13A & #022871.

Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types. Standard 'classic' resistor. Sold in multiples of 5. 10% tolerance.

Alpha Mini Pots with solid shaft and short PC mount terminals.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 3.8 mm (0.150”)
• Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
• Lead Thickness: 0.5 mm (0.020”)

Bourns Audio Potentiometer, Premium, Conductive Polymer, Solder Lugs

• 0.625" W x 0.625" L x 0.5" D
• 300° rotation
• Power Rating: ¼ watt
• ¼" Knurled 18-Spline Split Shaft
• ¾" Bushing Length
• Tolerance: ±20 %
• Very Low Noise

Linear, .75" bushing length. Conductive polymer, 0.625" W x 0.625" L x 0.5" D body. ¼" watt, 300° rotation. ¼" shaft diameter. Solder lugs. 3/8" bushing. Knurled split shaft.

CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
The Series 450G Guitar Potentiometer is the same robust high-quality guitar potentiometer that has become the industry standard for top guitar manufacturers. Featuring reduced shaft wobble, low noise output, and smooth rotational feel, the Series 450G is supplied with standard tin-plated rear cover and solder lug terminals.

Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.

Audio taper, knurled split shaft, sealed body 24mm potentiometer

This electronic component storage box works great for storing caps, pots, resistors and other electronic components. Made of plastic.

Angled nozzle attachments for the Atten ST-862D hot air station. These attachments are a great accessory allowing for a more relaxed grip and better control. Sold individually.

I.C. hand lotion soothes dry, chafed skin caused by glove irritation and chemical contact. ESD-safe. Improves skin contact with wrist strap grounders. Contaminant-free, greaseless. Natural Non-Contaminating Static Dissipative Moisturizing Hand Lotion contains NO Silicones, Lanolin’s, Glycerin or Mineral Oils. Absorbs immediately into your skin and is greaseless. The IC Pre-gloving Moisturizer helps to relieve dermatitis, urticaria, “skin flaking”, chapping and other irritations due to regular use of gloves and will not degrade or weaken latex or Nitrile Gloves. Used in conjunction with wrist straps. Vitamins A, D & E lightly fragranced with all natural herbal steeped tea along with hints of grapefruit and lemon splashes.

• Helps to meet ANSI S20.20
• NSF E4 Certified for Food Handlers
• Static Dissipative and ESD Safe
• Helps Grounding to Wrist Straps
• CHG Compatible

Chemically improves ALL metal to metal connections and contacts for clearer audio, clearer video, and reliable data. Includes: DeoxIT® brush applicator (#D100L-2DB), (Applications = 500 ± brush strokes, 10mm long) DeoxIT® GOLD brush applicator (#G100L-2DB), (Applications = 500 ± brush strokes, 10mm long) Lint-free swabs, brushes and cloths

Pack of 75 Tuff Wipes for use on hands and cleaning surfaces. 9 1/2 x 12" sized sheets.

• Easy-to-use textured wipes help clean up in a hurry.
• Economical. Tough on grease, gentle on hands and surfaces.
• Recommended for cleaning up paints, adhesives and lubricants.

300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.

Combination Drive, Colored Head Binding Screws, 6mm, M3, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. See S-HS-M3-6-X for colored 6mm M3 screws.

The oscillation frequency range of this audio generator is between voice frequency band and super voice frequency band. Square and sine wave. 10K ohm input impedance, 10 V rms maximum input voltage. 600 ohm output impedance. Equipped with synchronized input terminals, enabling the high power output signas to be accurately controlled by small signals. comes with test lead and ground lead. 5.9" high x 9.8" wide x 5.1"deep.

The Atten ST-862D high power hot air station. The ST-862D hot air station offers powerful heating with plenty of airflow in an affordable package with no compromises. Professionals have done detailed comparisons with machines more than three times the price and have found that the ST-862D performs just as well or better. The ST-862D is a great choice for beginners looking to learn SMD soldering and is also a great choice for those looking to upgrade their current setup.

Double edge nut files featuring popular guitar gauges specially designed for slotting nuts. Each set of files is specifically designed for guitars of a particular type. This set of three files will cover the work of six and cuts a smooth round bottom slot. Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.

• 4” cutting edge
• Set of 3 files
• Made In Japan

CP files have special file tooth pattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.

Miniature type used in combined vertical-deflection-oscillator and vertical-deflection-amplifier applications in black and white television receivers. Requires miniature 9-contact socket.

Miniature heptode primarily intended to perform the combined functions of mixer and oscillator in automobile radio receivers. Specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.

Miniature pentode intended for use as a radio-frequency or intermediate frequency amplifier in automobile radio receivers. The tube is specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.

Miniature double didoe, high-mu triode intended for use as a second detector audio amplifier. It is designed for operation where the heater and plate voltages are supplied directly from a 12-volt automotive storage battery.