Transistor - Fender®, A1837, amplifier application
A1837 Transistor - Fender. Power amplifier applications and Driver Stage Amplifier Applications.
Vacuum Tube - 12JT6A, Beam Power Amplifier
The 12JT6A is the same as the 6JT6A except for heater characteristics and ratings.
Vacuum Tube - 6CT7 / EAF42, Pentode
Single diode, remote cut-off R.F. pentode.
Foot - Rubber, ⅝" x ½", Recessed Bumper
Package of 45/8" diameter x ½" high, recessed rubber bumper. Screws not included.
Vacuum Tube - 6K7G, Pentode, Remote Cut-Off, RF
The 6K7G is an indirectly heated pentode of the vari-mu (remote cut-off) type for use in the RF or IF stages of radio equipment.
Terminal Strip - Kulka, 599 Series, Barrier Strip, 7 Pole
High quality seven pole barrier strips made by Kulka / Marathon. These terminal blocks have a solid phenolic base with plated brass terminals and combination head screws. Features:
- Base, Phenolic, 150° C
- Open Back Design (Insulator Strip Required for Voltage Rating)
- Screws, #5-40 Binder Head, Phil-Slot
- Terminals, Plated Brass
- 7 Poles
- 3/8” Centers
- Wire Range With Wire Binding Screw #16-#22 AWG – 15 Amps
- UL Recognized File No. E47811
- CSA Certified File No. LR19766
Vacuum Tube - 6AU4GTA, Diode, Damper
Single heater-cathode type diode intended for service as the damping diode in the horizontal-deflection circuit of television receivers. High output current capabilities make the tube particularly well suited for autotransformer deflection systems
Vacuum Tube - 6FH5, Triode, HF
Neutrode triode tuner in the 7 pin miniature construction. It is designed for use in grounded cathode RF amplifiers, with the neutrode construction providing a lower grid to plate capacitance with consequent ease of neutralization.
Vacuum Tube - 6AF4A / 6DZ4, Triode, UHF, Oscillator
Medium-mu triode in the 7-pin miniature construction. It is designed for local oscillator service in television receivers which operate in the UHF region, internal lead inductance is reduced by employing double connections to the plate and grid.
Vacuum Tube - 6BS8, Dual Triode
Miniature, medium-mu twin triode designed for use as a VHF cascode amplifier. In this application, section two (pins 1, 2, and 3) is intended for the input section.
Vacuum Tube - 6HA5 / 6HM5, Triode, HI MU
Miniature triode designed particularly for service in VHF television tuners as a grounded-cathode RF amplifier.
Vacuum Tube - 3Q4, Pentode, Power
The type 3Q4 is a miniature type power-amplifier pentode designed for use in the output stage of battery operated equipment.
Vacuum Tube - 6BY6, Heptode
Miniature dual-control heptode designed primarily for use as a combined sync separator and sync clipper in television receivers. Each of the two independent control grids exhibits a sharp cutoff characteristic.
Diode - Hexfred, 16A, 600V, ultrafast
High performance, ultrafast diodes. Improve efficiency, reduce noise, allow higher frequency operation.
Tube Base - 4 pin, ceramic, 1.25" diameter
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
Cord - Power, for United Kingdom plugs, 8 feet
Detachable 3 conductor power cord for United Kingdom wall outlets. Cord end is IEC connected. GTSA-3 (Marshall™ type) 18 AWG. 2-1/2 meters (about 8 feet) length, 1/4” outer diameter.
Knob - Peavey, Hi / Rev and Low / Mid Control Bottom for KB-300
Hi/Rev and Low/Mid control bottom for concentric potentiometers on Peavey KB-300 keyboard amp. Peavey part: 70902035
Vacuum Tube - 6J6A / ECC91, Dual Triode, Medium MU
Twin triode in the 7 pin miniature construction. It can be operated in parallel or push-pull.
Vacuum Tube - 5726 / 6AL5W, Dual Diode
Twin diode miniature type intended for applications where dependable performance under shock and vibration is paramount. The 5726 is a "premium" version of the 6AL5W
Vacuum Tube - 6BK7-A-B, Dual Triode, HF
Miniature twin triode designed primarily for use as a cascode amplifier at frequencies below approximately 300 megacycles.
Vacuum Tube - 6CN7, Dual Diode, Triode
Duplex-diode high-mu triode in which separate cathodes are provided for the diode and triode sections. The tube is primarily intended for service as a combined horizontal phase detector and reactance tube in television receivers.
Vacuum Tube - 6BN6 / 6KS6, Discriminator, Gated Beam
Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.
Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
- Center PCB hole diameter -0.73"
- Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
Vacuum Tube - 6BY7 / EF85, Pentode
R.F. pentode with variable transconductance for use as wide-band amplifier.