Clearance Items

The oscillation frequency range of this audio generator is between voice frequency band and super voice frequency band. Square and sine wave. 10K ohm input impedance, 10 V rms maximum input voltage. 600 ohm output impedance. Equipped with synchronized input terminals, enabling the high power output signas to be accurately controlled by small signals. comes with test lead and ground lead. 5.9" high x 9.8" wide x 5.1"deep.

Miniature type of medium-mu twin triode intended especially for coverter service in ac/dc FM and AM receivers. In such service, one triode unit may be used as a mixer, and the other as an oscillator.

The premium subminiature type 5902 is a beam power pentode designed for use as an audio amplifier. It is intended for operation under conditions of severe shock, vibration, high temperature, and high altitude.

Beam power tube - high power sensitivity RCA "Dark Heater" with 12 to 15 volt range.

High-mu power output triode designed for service in dynamic coupled circuits using a type 76, 6P5GT/G or 6J5GT/G as a driver. Two 6AC5GTs may be used as a zero bias class B amplifier.

Duodecar type tube used in audio-frequency circuits. The triode unit is used as a voltage amplifier; the pentode unit is used as a power amplifier.

Every part of your system contributes to your Ultimate Tone, so every part is important. The Ultimate Tone, Volume 5 delineates, in clear language, the function of each electronic component in a circuit, and how alterations to the value of each part affect the final sound. Gain stage voicing, interstage attenuator optimization, sustain restoration for clean and distorted tones, power amp and preamp "tone generators", simple boost pedals, amp selectors and power conditioners are all covered, with designs using off-the-shelf parts. Like TUT3, this is a "project book" presenting design challenges and solutions, with a diversity of tube and solid-state circuits for bass, guitar and keyboards.

The evolution of guitar amp circuits becomes a revolution! The Ultimate Tone, Volume 6 takes you through advanced DC Power Scaling methods; reveals the secrets of Dumble amps; explores the truth about high-gain preamps; demonstrates how to build Z-B-X push-pull power amps with a single power tube; simplifies the design of 400W+ tube amps - methods that can be applied to any power level; presents class-G tube amps where 100W of output has the same waste heat as a 25W amp; explores modern mains control and sustain circuitry.

Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12 Alnico Blue (our SKU's P-A-G12-8 and P-A-G12-15)

The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.

With a massive 100W power rating, this speaker sits perfectly in high-power or hybrid amplifiers. It voices a modern sound with a big bass presence.

The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle. Guitarist Description: Heavy on the mids with a solid, straightforward tone. Presented with overdrive distortion, it powers through with lows that are bold and heavy.

• Lows: Tight
• Mids: Aggressive
• Highs: Subtle
• Overdrive: Edgy/Crunchy

For the 8 ohm version, see P-A-N12K-8

The 1020 is a bass and mid range driver with a high sensitivity. It is ideally suited to compact enclosures and high pass systems.

Genuine Bigsby® replacement handle stud.

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD510 series solves these problems by combining “Rock-solid"™ technology and the post collar or: “self-center guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD510 series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through it is use of the ideal materials selected for each component part you also obtain a far superior sound. 1:15 gear ratio.

Set of 6 tuners - 3 per side with round knob. 1:15 gear ratio. Hardware included.

This model offers the same specs and styling as the Original “Milk Bottle" style 102 Series, but with Pearloid Buttons and button retainer. 18:1 ratio.

A smaller version of the regular size ROTO-GRIP® lockers for the in line and smaller headstocks or for those who prefer a lighter feel.

Vintage style stamped tuning machine set with solid metal oval buttons mounted on a plate. These nickel finished tuners look great on vintage and Fender® style guitars. The gear ratio is 15:1. All mounting hardware is included in this six on a plate tuner set.

Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.

Original Fender® pickguard replacement for 62' P-Bass, 4-ply. Multiple color options available.

The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:

• Guitar/ Keyboard/Bass amplifiers and combos
• Audio mixing consoles / Powered mixing consoles
• Stand -alone stereo effect units for studio and PA usage
• Effects pedals

Miniature heptode primarily intended to perform the combined functions of mixer and oscillator in automobile radio receivers. Specially designed to operate with plate and screen voltages supplied directly from a 12-volt storage battery.

Pentode in the 7-pin miniature construction. It is intended for use as an RF amplifier in automobile radio receivers and is designed to operate with its plate and screen voltages supplied directly from a 12-volt storage battery.