You are here

Clearance Items

Filter these results

Pages

(16 pages)
Vacuum Tube - 5755 / 420A, Dual Triode
The 420A electron tube is a double-triode having separate indirectly heated cathodes. The heater is center-tapped to permit operation from a 6.3 or 12.6 volt filament supply.
$9.90
$4.95
You save: 50%
Click to read more
Vacuum Tube - 6BY6, Heptode
Miniature dual-control heptode designed primarily for use as a combined sync separator and sync clipper in television receivers. Each of the two independent control grids exhibits a sharp cutoff characteristic.
$5.90
$2.95
You save: 50%
Click to read more
Vacuum Tube - 6CN7, Dual Diode, Triode
Duplex-diode high-mu triode in which separate cathodes are provided for the diode and triode sections. The tube is primarily intended for service as a combined horizontal phase detector and reactance tube in television receivers.
$4.90
$2.45
You save: 50%
Click to read more
Vacuum Tube - 6FH5, Triode, HF
Neutrode triode tuner in the 7 pin miniature construction. It is designed for use in grounded cathode RF amplifiers, with the neutrode construction providing a lower grid to plate capacitance with consequent ease of neutralization.
$5.90
$2.95
You save: 50%
Click to read more
Vacuum Tube - 6JT6A, Beam Power Amplifier
Beam power tube for horizontal-deflection-amplifier service in black-and-white TV receivers.
$39.90
$19.95
You save: 50%
Click to read more
Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
$99.90
$49.95
You save: 50%
Click to read more
S-C5430Microfiber Cloth - Dunlop, Guitar Finish

Keep your precious jewel gleaming! The Dunlop Guitar Finish Cloth was developed using a formulation originally designed for jewelers. The super-soft cloth is absorbent, non-abrasive and perfectly matched to all popular guitar finishes. It’s constructed of densely woven Japanese microfibers to lift and eliminate dust, grime, and fingerprints. Want to add years to your guitar’s life? Wipe it down with the Dunlop Guitar Finish Cloth every time you put it away. Since it’s fully machine washable you can refresh it anytime.



  • Super-soft cloth
  • Safe for all popular guitar finishes
  • Eliminates dust, grime, and fingerprints.
  • Machine washable


Need some polish to go along with your cloth? Check out the Dunlop Formula No. 65 guitar Polish and Cleaner (S-C654)


$10.60
$9.54
You save: 10%
Click to read more
K-998Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack

Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.


$64.95
$58.46
You save: 10%
Click to read more
P-RTAD-4BB3C1BReverb Tank - Tube Amp Doctor, 4BB3C1B, Long Decay, 2-Spring
  • Replaces: 4BB3C1B
  • Solid, sturdy construction
  • Type: Long (2 Spring) tank
  • Decay: long decay
  • Input: 150 Ω
  • Output: 2,250 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down




Compatible amps include Fender® Blues Deluxe (original version), Blues Deville (original version), London Reverb, Studio Lead, Harvard Reverb II, Showman 115 (80’s version), Rivera™ Rake, Jake Studio Combo, and Fandango models, Laney™ VC30, Crate™ V-32 Palomino.



"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.



The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."



-Tube Amp Doctor



Questions about reverb tanks? See our tech articles for more information.


$29.95
$26.96
You save: 10%
Click to read more
S-W110Wire - 38 AWG, Celanese covered, cotton wrap
Sold by the foot

Celanese covered wire, resembling early cotton covered wire. May be color dyed. Cotton wrap, #38 magnet wire. 20 foot minimum. 105°C temperature rating, 600V. Great for making or rewinding vintage style coils.


$0.15
$0.14
You save: 7%
Click to read more

Pages

(16 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Clearance Items