Clearance Items

Amp Cover - Orange, for Amplifier Heads
Orange™ amp head cover. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo. Versions available for:
  • CR120H
  • Large Amp Heads (Thunderverb / Rockerverb / AD200)
  • Small Amp Heads (AD30HTC / Custom / RK30H)
Starting at $25.24
Save 15%
Originally: $29.69
Amp Cover - Orange, for Cabinets and Combos
Orange™ cabinet/combo covers. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo.
  • Standard 1x12 fits RK30TC / CR60C / CVR-112 Combo
  • Standard 2x12 fits AD30TC / RK50C / CR120
Starting at $21.25
Save 15%
Originally: $25.00
Amp Kit - MOD® Kits, MOD101 guitar amplifier
MOD 101 Guitar Amp Kit Features:
  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 60W output power into 4, 8, 16 and 20 Ω
  • 1 channel with customizable: tone stack, power tubes, negative feedback, input miller capacitance volt divider/LP filter, and preamp cathode bypass cap (all parts included)
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • DPDT power switch circuit for instant high-voltage drain in power-off
  • Standby Switch
$595.00
Attenuator - Recycled Sound, Power Plug 100, -10 dB to -30dB
The Power Plug 100 offers the same -10db as the Power Plug Lite (M-PPLITE) but adds another "Bedroom Level" pot for further attenuation of up to -30dB AND is suitable for amps up to 100 watts! Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume. So you can adjust your amp as usual and use the attenuator as an overall Master volume.
$189.95
Attenuator - Recycled Sound, Power Plug 6 / 12, -6dB or -12dB
The Power Plug 6 / 12 attenuator is a "must have" device for anyone that plays a tube amp. If you want to work your power tubes without ear-splitting volume, you need an attenuator. The Power Plug is the BEST attenuator made for amps 50 watts and less. Simple 2 switch operation for -6db or -12db attenuation. Get your best tone!
Why 6/12? Engage 1 switch and remove -6db of power. Engage the 2nd switch and you're -12db. That's a volume reduction of 60%. The Recycled Sound attenuator is a passive, resistive load with compensated impedance and EQ, which maintains the designated impedance, EQ'd such that no degradation in tone is noted, even at full -12db attenuation. Use it as a Master Volume, use it to save your hearing at practice, find your tube tone without getting thrown out of the club, use it to prevent blowing up your vintage or low power speakers.
Use TWO in series and achieve -24db attenuation - bedroom level!
$89.95
Attenuator - Recycled Sound, Power Plug Lite, -2 dB to -10 dB
The Power Plug Lite offers up to -10db attenuation in a rotary switch with -2db increments. The Power Plug Lite will accept all impedances and is rated for up to 50 watt amps. The same cool extruded aluminum case as the original Power Plug (M-ATT-6-12) for those who want a lighter touch and more control. Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume.
$114.95
Bridge - Hipshot, Fixed Guitar, 8 String, .125" Height, chrome
The 8 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.
$86.85
Cable - Grover, Speaker, Nickel Plugs
Equipped with a ¼" nickel plated straight phone plug. Specifically designed cables prevent shocks and allows for minimum hum or noise providing 100% signal.
Starting at $16.25
Capacitor - MusiCap, 100V, Film & Foil Polypropylene
Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
Starting at $21.65
Save 37%
Originally: $34.40
Capacitor - Peavey, 55V, 4700µF, Axial Lead
Peavey 4700 µF @ 55V polarized electrolytic capacitor with axial leads. 7/8" diameter x 2" length.
$6.95
Cord - Korg, AC Power, 125 V, 10 A
AC power cord for the Korg KA-310 power adapter (part number M-K080).
This power cord features a standard IEC C7 non-polarized connector that mates with IEC C8 connectors. These are sometimes referred to as "figure 8" or "shotgun" connectors.
$9.95
Cover - Fender®, 3 Pieces, Road Worn®, Aged White
Package of 3
Original Fender® Road Worn® aged white replacement pickup cover set for Strat, package of 3.
$21.75
Cover - Fender®, for Vintage J-Bass
Package of 2
Original Fender® replacement pickup cover for vintage J-Bass, pkg of 2.
$8.25
Cover - Mini Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Starting at $7.86
Save 15%
Originally: $9.25
DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
$32.00
Effects Pedal - TWA, Flyboys FB-03, Echo
The TWA Flyboys FB-03 is a massive sounding delay pedal in a tiny package. This pedal takes you from the snappiest slapback sounds to big spacious delays with over 600 milliseconds of delay time. The bright and articulate delay signal keeps the mix crisp and transparent while the repeats add a touch of modulation for a warm tape like sound as the signal decays. The FB-03 Echo can go from one repeat to infinite repeats putting the pedal into self oscillation for wild feedback effects. The FB-03 Echo also features a true bypass footswitch and comes with a DC jack to battery clip converter cable.
  • 9VDC 2.5mm Barrel Connector
  • 42mA maximum current draw
  • True bypass switching
  • 20 – 620 ms delay time
  • Self oscillating
  • Extruded aluminum chassis
  • Quality components
  • 1.75” x 3.75” footprint
$79.00
Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack
Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$64.95
Footswitch Box - Marshall, 5 Button with LED
Original Marshall Footswitch, Five Button With LED (Clean, Crunch, Lead, Reverb, FX). 6 Pin DIN Plug. For use with TSL Amps.
$155.95
Footswitch Box - Marshall, One Button (Channel)
Original Marshall Footswitch: P801. One Button (Channel). ¼" Plug For use with most Marshall Amps. This single latching footswitch is designed to enable you to easily change between channels.
$74.95
Footswitch Box - Marshall, Two Button w/ LED (Multiple Decals)
Original Marshall two-button LED footswitch with eight decals for various uses. This pedal is hardwired with a TRS plug.
$84.95
Horn - Sica, 1" Compression, Elliptic
Clearance - New Old Stock speaker compression horn.
SICA Horn - SSH1
  • Elliptical Shape
  • 1" Throat Diameter
  • Measures 7.9 x 6.3 x 3.9 inches
$5.95
Indicator Light - Marshall, Red Square, 120V
Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)
$4.85
Keyboard Key - Korg, "C" & "F" keys
For use with M1, Trinity, Triton, 01-W, Wavestation and i30 keyboards.
$10.00
Knob - Marshall, Brown, Gold Cap, Push-On
Genuine Marshall® knob for 18 teeth knurled pot shafts. Used on the MG100HDFX, G100RCD, and other models. Sold individually.
$4.25