Clearance Items

Receptacle - Interlock, Non-Polarized
Package of 10
Interlock receptacle, non-polarized. Package of 10.
Save 38%
Originally: $0.90
Most Often Needed Radio Diagrams, Volume 1
by M. N. Beitman
Radio Diagrams and Servicing Information from 1926 to 1938. Shows circuit diagrams for 600 of the most commonly found radios of that time. A valuable resource for restorations.
Foot - Rubber, 1" height x 1" diameter
Package of 4
1" diameter x 1" tall rubber foot with 0.15" mounting hole diameter for #6 screws. Screws not included. Package of 4.
Vacuum Tube - 6K7G, Pentode, Remote Cut-Off, RF
The 6K7G is an indirectly heated pentode of the vari-mu (remote cut-off) type for use in the RF or IF stages of radio equipment.
Save 50%
Originally: $6.25
Vacuum Tube - 5AR4, Chinese
Chinese 5AR4 Vacuum Tube
Save 50%
Originally: $9.90
Cable - Signal Flex, Patch Cord, 6", right-angle
Package of 6
Signal Flex 6" cable with two right angle ¼" plugs.
Vacuum Tube - 12AT7, China
Chinese 12AT7 dual triode.
Vacuum Tube - 5726 / 6AL5W, Dual Diode
Twin diode miniature type intended for applications where dependable performance under shock and vibration is paramount. The 5726 is a "premium" version of the 6AL5W
Save 50%
Originally: $4.90
Vacuum Tube - 12AU7, China
9 pin miniature preamp tube (Amplification Factor = 17)
Vacuum Tube - 6AG5 / EF96, Pentode
Miniature type RF pentode having a sharp cut-off characteristic and a high value of transconductance. In compact, light-weight equipment it is useful as an RF amplifier up to about 400 megacycles.
Save 50%
Originally: $3.90
Vacuum Tube - 6SL7GT, Tube Amp Doctor, Premium Selected
The Tube Amp Doctor 6SL7GT meets all of the reliability and quality requirements of a TAD Premium Selected tube including low noise and gain balanced triodes. This 6SL7 has a great lively tone with smooth and clear highs and a sonically rich mid range. The TAD 6SL7GT can also be used as an upgrade for Russian 6N9 and 6N9P tubes.
Tube Base - 4 pin, ceramic, 1.25" diameter
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
Save 51%
Originally: $5.75
Vacuum Tube - 6AS5, Tetrode, Beam Power
Miniature beam pentode designed primarily for use in the audio-frequency power output stage of automobile receivers. The tube is capable of delivering a relatively high power output at low plate and screen voltages.
Save 50%
Originally: $3.90
Wire - #26 Celanese covered magnet
Sold by the foot
White celanese covered wire, resembling early cotton covered wire, may be color dyed. Cotton wrap, #26 magnet wire. 20 foot minimum. 105°C temperature rating, 600V.
Save 33%
Originally: $0.15
A minimum order of at least 20 is required.
Vacuum Tube - 6BK7-A-B, Dual Triode, HF
Miniature twin triode designed primarily for use as a cascode amplifier at frequencies below approximately 300 megacycles.
Save 50%
Originally: $4.90
Vacuum Tube - 6J6A / ECC91, Dual Triode, Medium MU
Twin triode in the 7 pin miniature construction. It can be operated in parallel or push-pull.
Save 50%
Originally: $4.90
Vacuum Tube - 6BJ7, Triple Diode
Miniature, triple diode primarily intended for use as a d-c restorer in each of the three signal channels of color television receivers. For flexibility in circuit design, each diode incorporates a separate cathode
Save 50%
Originally: $3.90
Belt - Leslie, 31", Lower Drive, for 122/147
Replacement lower drive belt, white, 31" circumference.
Vacuum Tube - 5840 / 6225, Pentode, Sharp Cut-Off
The premium subminiature type 5840 is a sharp cutoff pentode characterized by long life and stable performance under conditions of severe shock, vibration, high temperature and high altitude
Save 50%
Originally: $9.90
Vacuum Tube - 12AX7, Peavey
Peavey 'Super 7' 12AX7
Vacuum Tube - 6HA5 / 6HM5, Triode, HI MU
Miniature triode designed particularly for service in VHF television tuners as a grounded-cathode RF amplifier.
Save 50%
Originally: $5.90
Transformer - One Electron, Output, 3000 Ω to 16/8/4 Ω
The UBT-3 from One Electron is the same size and power (15 watts) as the UBT-1, but has a primary impedance suitable for single or paralleled tubes running at B+ voltages of 300 to 400 volts, such as: 2A3, WE 300B, 50, etc.
Footswitch Box - Marshall, Two Button w/ LED (Multiple Decals)
Original Marshall two-button LED footswitch with eight decals for various uses. This pedal is hardwired with a TRS plug.