Speaker - Jensen Smooth Bass, 15", BS15N350A, 350W, 8Ω
The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.
Effects Pedal - Maxon, AD9Pro, Analog Delay
The Maxon AD9Pro is a high quality analog delay with up to 450ms of delay time using Maxon’s MC4107D BBD chip. With two delay modes and a wide range of control, the AD9Pro offers transparent analog delays that fit any genre. Features
- Switchable Single Head/Dual Head modes. In Dual Head mode, the midstream delay signal is mixed back into the delay.
Speaker - Jensen® Jets, 12", Tornado Stealth 80, 80W
The Tornado Stealth 80 is the Neodymium counterpart of the ceramic powered Electric Lightning. The Stealth 80 is extremely efficient, with slightly scooped mids, and it shines in the cleanest as well as in the heaviest tonal applications. It delivers exceptional punch and attack, retaining all the clarity needed for palm-muted riffs and power chords, as well as crystal clear clean rhythm playing.
Speaker - Jensen® D-Series, 12", N12D, 150W
The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.
Vacuum Tube - 8950, Pentode, Power Amplifier
Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.
Speaker - Jensen® Vintage Neo, 12", N12K, 100W
The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle.
Effects Pedal - Maxon, CP101, Compressor
The Maxon CP101 is a classic compressor pedal that offers up to 42dB of natural sounding compression for a controlled sound with plenty of sustain. The CP101 is designed to preserve the sound of the guitar with its transparent attack and clean tone. Features
- Clean and natural compression with little change to the original tone
- Limiter-like effects for consistent levels.
- Transparent pick attack and relaxed sustain for lead guitar
- Great for bass guitars and semi-acoustic guitars
- LED indicator for effect on/off
- DC power or 9V battery
- Made in Japan
Pickup - McNelly, Stagger Swagger, Open Nickel
This McNelly Stagger Swagger pickup features an open nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
Pickup - McNelly, Stagger Swagger, Nickel
This McNelly Stagger Swagger pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.
Speaker - Jensen® D-Series, 12", C12D, 150W
The C12D is able to return the powerful, organic, warm tone and character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar.
Speaker - Jensen® MOD®, 12", MOD12-110, 110W
The Mod 12-110 is a 12" ferrite speaker with 110 watts of power. Strong, punchy, and articulate with emphasis on the mids. It responds to overdrive distortion with a tight and balanced fuzz that remains strong and straightforward.
Bridge - Hipshot, SuperTone, 2 Point BassHipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”
Vacuum Tube - 6922 / E88CC, Dual Triode, Gold Pins
Dual Triode, Gold Pins
Vacuum Tube - 6A3, Sovtek
Sovtek 6A3 power triode tube. Made in Russia.
Starting at $96.25
Pickup - McNelly, Tele, A5 Signature Plus
“The Alnico 5 Signature is higher output than traditional vintage styles. Tight bass, present mids, and a conveniently subdued treble. It's there if you want it, but you're in control. If I were Leo, this is what I would have made in 1950.” –McNelly Pickups
Speaker - Celestion, 12", Seventy 80, 80W
This 12 inch guitar speaker meets the expanded frequency range often requested by the new generation of amp manufacturers.The Seventy 80 is detailed and crisply defined, with a tightly controlled low-end and punchy, aggressive upper mid-range. The top-end response is also subtly increased. Used singly, in pairs or quartets – it is capable of reproducing a wide range of sounds and styles whilst adding the undeniable Celestion character to any amp.
Tremolo - Gotoh, Low Friction, retrofitA newly fashioned design from Gotoh® with almost no internal friction. Designed to directly retrofit the mounting hole pattern of a vintage tremolo. You can use this bridge to replace a conventional, 6 mounting screw Strat® tremolo with no mods to the body. Hardware included.
Starting at $90.00
Bridge - Hipshot, Fixed Guitar, 8 String, .125" Height, chrome
The 8 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.
Pickup - Kent Armstrong, Icon Vintage 57 (Alnico 2), BridgeKent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.
Starting at $74.25
Hum Exterminator - Morley, Ground Loop Hum Eliminator
The Morley Hum Exterminator™ filters out unwanted voltage on the ground line that can cause ground loop hum. Simply place the Hum Exterminator™ on the end of the power cord of the equipment that has a Ground Loop and plug the Hum Exterminator™ into the wall outlet. Ground Loop is gone and signal remains intact. Easy to use, easy to install, absolutely safe and completely effective!
- Exterminate Ground Hum Right at The Source!
- Designed to solve GROUND RELATED Hum and Buzz
- Filters the Ground Line of Excess Low Voltage and Current that Cause Audio Noise
- Maintains Proper Ground
- NOT a Ground Lift
- Simply Connect Hum Exterminator™ to Power Plug of Offending Gear
- Maximum recommended Current per Hum Exterminator™ Is 6 Amp
- Handy LED Shows Power is On and Unit Is Working
Vibramate - Standard Kit, Left-Handed, For Bigsby B5Vibramate Left Handed V5 Adapter Mounting Kit, For Bigsby B5 Now you can install a Bigsby Vibrato on your guitar without drilling any holes! The Vibramate Left Hand V5 Model Quick Mount Kit is designed for a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar. The unit automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance.
Bridge - Hipshot, 4 String KickAss™, for BassAt first blush, the KickAss™ might seem like a simple, heartfelt tribute to Leo Quan’s BadAss II®. A closer look, however, reveals significant improvements under the hood that put this bridge in a class of its own. Hipshot worked hard to ensure that the KickAss™ possesses the soul of the beloved original without being a knockoff.
Starting at $66.95
Pickup - Kent Armstrong, Jazzy Joe, Side Mount Jazz, Adjustable
Kent Armstrong “Jazzy Joe” jazz pickup with adjustable pole pieces, side-mount configuration. Nickel. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited. Magnet Type = Alnico 5 Magnet Dimensions = 55mm Long x 3mm Thick x 12.5mm Wide D.C. resistance = 7.9K (two solder lug connections on underside) Pickup Dimensions: 7/16 in. (11.1mm) Thick – not including pole pieces 1 7/64 in.
Bridge - Gotoh, Multi Tonal, 4-String Bass, Brass Saddles, Chrome
The Gotoh 404BO-4 is a solid bass bridge for bassists looking for the best performance available from their bridge. The thick hard zinc plate paired with brass saddles offers a balanced tone. The saddles feature two height adjustment screws to dial in the perfect action as well as a wide area of travel for a perfect intonation. The height adjustment screws sit in slots on the bottom plate for additional stability. This string through bass bridge comes with a mounting hardware and also includes a hex wrench for saddle adjustments.