Clearance Items

Designed for use on Telecaster ® style guitars Bigsby B16 Specifications

• Model Name: B-16
• Series: Original Kalamazoo Line
• Manufacturing Method: Sand Cast
• Manufacturing Material: Aluminum
• Approximate weight: 333 grams/ 11.7 oz.
• Overall Length: 8 3/8"/ 212.7 mm
• Overall Width: 4 1/4"/107.9 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Designed for use on arch top electric guitars. The Bigsby was the first successful design of what is now called a whammy bar or tremolo arm, although vibrato is the technically correct term for the musical effect it produces. In standard usage, tremolo is a rapid fluctuation of the volume of a note, while vibrato is a fluctuation in pitch. The origin of this nonstandard usage of the term by electric guitarists is attributed to Leo Fender, who also used the term “vibrato” to refer to what is really a tremolo effect.

• Model Name: B-7
• Series: Original Kalamazoo Line
• Manufacturing Method: Cast
• Manufacturing Material: Aluminum
• Approximate weight: 354 grams/12.5 oz.
• Overall Length: 8 3/4”/222.3 mm
• Overall Width: 3 5/8”/92.1 mm
• Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench

This is the left-handed version of the Bigsby B3 designed for use on thin electric hollow and semi-hollow guitars. Mounting screws, arm spring, and washer included.

The B5, sometimes referred as the Bigsby “horseshoe” is designed for flat top solid body guitars. Attaching via four screws to a guitar’s top, the B5 is extremely versatile. B5s are common on many styles of guitars including SGs, Les Paul Jrs, Telecasters, and Rickenbacker 325s. Left-handed version.

• Model Name: B-5
• Series: Original Kalamazoo Line
• Manufacturing Method: Cast
• Manufacturing Material: Aluminum
• Approximate Weight: 287 Grams/10.1 oz.
• Overall Length: 4 3/4”/120.65mm
• Overall Width: 3 3/4”/95.3mm

Designed for use on arched top electric guitars Bigsby B16 Specifications

• Model Name: B-12
• Series: Original Kalamazoo Line
• Manufacturing Method: Sand Cast
• Manufacturing Material: Aluminum
• Approximate weight: 344 grams/12.1 oz.
• Overall Length: 8 3/8" / 212.7 mm
• Overall Width: 3 5/8" / 92.1 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Lightning Series II. The Bigsby vibrato tailpiece is a type of vibrato device for electric guitar designed by Paul A. Bigsby. The device allows musicians to bend the pitch of notes or entire chords with their pick hand for various effects.

• Model Name: B-500
• Series: Lightning Series II
• Manufacturing Method: Die Cast
• Manufacturing Material: Aluminum
• Approximate weight: 279 grams/9.8 oz.
• Overall Length: 4 9/16"/ 115.9 mm
• Overall Width: 3 ¾"/95.3 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

*Designed for use on flat top electric guitars Bigsby Lightning Series Vibratos were created for players who want the Bigsby sound and "vibe", but for use on less expensive instruments.

Designed for use on thin hollow body and semi-hollowbody guitars Bigsby B50 Specifications

• Model Name: B-50
• Series: Licensed Line
• Manufacturing Method: Die Cast
• Manufacturing Material: Aluminum
• Approximate weight: 290 grams/10.2 oz.
• Overall Length: 4 5/16" / 109.5 mm
• Overall Width: 3 13/16" /96.8 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Vibramate V5-TEV Stage II with FilterTron - TV Jones Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Vibramate V5-TEV Stage II with Shorty Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Vibramate V5-TEV Stage II with Humbucker Ash-Tray bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

The 7 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Threaded thumbwheel style studs and anchor bushings. Hardware included.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Standard mounting post style. Hardware included.

Original Fender® pickguard replacement for 62' P-Bass, 4-ply.

Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 5.92k Ohms
• Inductance (henrys) = 3.61
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

(Non-serialized) Bridge Plate. Used on American Vintage Series Telecaster® guitars manufactured from 1986 to the present. Mounting hardware included.
The standard version comes with 3 brass vintage Tele® saddles and the Road Worn version features three vintage steel saddles.

Direct replacement for most Fender 5 String P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included. Hardware included.

Double edge nut files featuring popular guitar gauges specially designed for slotting nuts. Each set of files is specifically designed for guitars of a particular type. This set of three files will cover the work of six and cuts a smooth round bottom slot. Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.

• 4” cutting edge
• Set of 3 files
• Made In Japan

Stud Mount Adjustable Bridge, Hardware, 2-1/16" String, 3-¼" Stud. Hardware included.

Genuine Bigsby® conventional Telecaster bridge for use with Bigsby vibrato. This is the stock bridge assembly used in B16 vibratos.
2 13/16” stud spacing.

U.S. made and true to vintage specifications. Lightweight (35 grams) aluminum for added resonance. Steel studs included.
The aluminum wrap around bridge is true to vintage specifications. Made from light-weight aluminum to increase string definition and resonance on those instruments using darker tone woods like mahogany, while reducing weight. Each side is adjustable using the included hex set screws to dial in the intonation. Studs and hex wrench included.

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.

U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.

• 3.22 in. (82mm) stud spacing

Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.