Tele style control plate. 5.9” plate mounting center distance (0.123” diameter, recessed).

• Two potentiometer mounting holes for 3/8” bushing diameters
• One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)
• Made in Korea

Jaguar style master control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.12” x 1.86” plate mounting center distance (0.14” diameter, recessed).

Standard (4-hole) and vintage (3-hole) versions. Replacement for most Jazz Bass style guitars. Made in Korea.

Original Fender® replacement chrome control plate for vintage Tele guitar. Used on nearly every Telecaster® (US and Mexico) manufactured from '52-present. Fits 3/8” bushing pots.

Jaguar style preset control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.57” x 1.79” plate mounting center distance (0.14” diameter, recessed).

The Gotoh Relic tele control plate is a convincingly aged part that is perfect for a vintage guitar or a relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This plate fits 3/8" bushing pots such as the CTS R-VC-MA or Alpha R-V38-XA and is compatible with standard selector switches. Relic'd mounting screws are included. For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• Neck Plate - P-GGT-89
• String Trees - P-GGT-92

Jaguar style selector switch plate in chrome. Perfect replacement for most Jaguar style guitars. This version features the stock three switch configuration originally used for selecting pickups and engaging the mid-tone cut.

This control plate features an artistic acanthus flower engraving that adds a custom look to Telecaster guitars. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Two mounting screws are included with the control plate. The 9.6mm mounting holes for the potentiometers are compatible with ⅜” bushing pots such as CTS.

Original Fender® replacement for standard J Bass, 4-Hole. Fits most U.S. and Mexico-made Jazz Bass® models manufactured from 1964-present. Mounting screws included.

Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.

• 7/16” threaded portion
• Available in Black, Gold, Nickel, and Chrome plating
• Package of 100

Set screw with brass insert, ¼" shaft. Measures 1.28" diameter x .71" tall.

Original Fender® chassis-mount hum balance potentiometer, 100 ohm.

• 100-ohm potentiometer used for hum balance control
• 1/4" threaded brass bushing for mounting to amplifier chassis
• Adjustable level control (flat-head screwdriver only)
• Mounting nut and washer included
• Adjustable from both the front and back face of pot
• Used for '65 Twin Reverb®, Machete™ and Vibrasonic amplifiers (1992-present) plus others

250 kΩ ohm. Original TBX tone control for most Strats and Teles. CTS manufactured, includes capacitor and comes in original Fender® packaging. Some instruments have a unique tone circuit that features a TBX Tone Control (Patented). The TBX (which stands for Treble Bass Expander), is a dual concentric stacked tone pot. The pot has a detent in the middle position. From 0 to 5 (at the detent), the TBX functions like a normal tone circuit with filtration through a capacitor. Advancing the knob counterclockwise from the detent position gradually filters off high frequencies, like a standard tone control. Rotate the knob clockwise from the detent position, and you add presence and brightness by allowing the pickups' natural resonance to come through. Fender part number: 099-2052-000

Original Fender® snap-in, control potentiometer, 1 meg, J taper.

The DMT is a passive dual mode guitar tone control designed specifically for electric guitars that can operate in either HIGH PASS or LOW PASS modes greatly expanding the instruments tonal possibilities without the use of a battery or active electronics. Micro switches on the circuit board provide the user the ability to select one of two different frequency ranges for both high and low pass modes. Easy installation with no capacitors or other parts needed. Replace the tone control in you guitar with one that you will actually use!

Original Fender solid shaft 250K potentiometer with J taper. 3/8-32 threading. The resistance between wiper and cold lug measures about 25% at half-way shaft rotation.

The HCP Humbucker Control Pot is a dual mode variable coil tap selector for electric guitars and basses that eliminates the additional switches associated with coil splitting a pair of humbuckers. In TAP mode, rotating the pot counterclockwise fades from humbuckers to outer coils (neck pickup South coil & bridge pickup North coil). Pulling the HCP control up and rotating it counterclockwise fades from humbuckers to inner coils (neck pickup North coil & bridge pickup South coil). Tonal control is expanded with the unique ability to coil tap both humbuckers in varying amounts. In COIL FILTER mode, turning the HCP control applies varying amounts of a specially tuned high frequency filter to only one coil of the selected coils of the humbuckers (either North or South coils can be filtered). This makes each pickup a single coil at high frequencies and a humbucker at lower frequencies which produces a sound similar to a pair of single coils but with a stronger, fuller tone and 50% less noise than coil tapping.

Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:

• Non- inductively wound polyester film/foil construction
• Radial lead
• 10% tolerance
• 100v voltage rating
• Rated for 85°C operation
• Tinned copper-clad steel leads

The FatKeys™ SSI2164 is perhaps the most flexible VCA available, with four independent channels for lowest cost-per-VCA. The user-selectable mode control allows Class A, AB, or intermediate biasing, and current inputs and outputs provide great design freedom. Ideal for voltage-controlled filters. The SSI2164 is a versatile VCA building block for high-performance audio applications. Four independent channels provide voltage control of current-mode inputs and outputs for a gain range from +20dB to –100dB, with control provided by a ground-referenced –33mV/dB constant. The SSI2164 will directly retrofit existing SSM/V2164 positions while offering improvements that include significantly lower overall distortion, on-chip protection against asymmetrical power failure, and a substantial increase of input current handling. The device offers considerable flexibility for a wide range of design goals and applications.

Large black plastic control knob with set screw and brass insert. This distinctive pointer knob is similar to the selector knobs used on original MiniMoog and Moog modular synths. It features a triangular pointer, a radial brushed metal top, and a line indicator. The large skirt has a diameter of 1.125 inches. Fits ¼” (6.35mm) pot shafts.

Jupiter Yellow Vintage Tone Capacitors Aluminum Foil Mylar 1960's Style Build. Modeled after the Yellow Astron and Blue Molded capacitors used in American amplifiers of the 50’s and 60’s. Made in the USA of US-made materials.

• Tone: Very Creamy Break-up.
• Construction: Polyester/Aluminum Foil/Tape Wrap
• Tolerance: +/-10%
• Operating temperature: -55C - 85C, derate 50% at 125C.
• Leads: 20awg Tinned Copper
• RoHS Compliant
• Application: Guitar Amplifier, Guitar Tone Control, Vintage Electronics

Small plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K411-X.

One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.

Large black plastic control knob with set screw and brass insert. The two different options include one version with a black plastic top and another version with a radial-brushed metal cap with a chamfered edge, each sold separately. The grip has a smooth straight knurl and the skirt features an arrow indicator. Fits ¼” (6.35mm) pot shafts.