DeoxIT® - Caig, D100L Brush Applicator
Applicator: Brush, provides NO flushing action, applies 100% DeoxIT®,
Formulation: 100% DeoxIT®.
Use: When contact and connector are easily accessible. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.
- Improves Conductivity
- Deoxidizes, Cleans and Preserves
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- Temperature Range, -34 C (-29 F) to +200 C (400 F)
Please see attached Safety Data Sheet for more information.
|% Volatility by Weight||0%|
|Deoxidizing Ability (% of Formulation)||20%|
|Dielectric Constant (Er)||2.314|
|Dielectric Strength||341 V/mil|
|Electrical Conductivity||4 × 10-10 S/m|
|Insulation Resistance||1.25 × 1010 Ω|
|Pour Point||< -27°C|
|Solubility In Water||< 0.1% @ 25°C|
|Temperature Rating||-34°C to 200°C|
|Total Acid Number||51.50 mg KOH/g|
|Vapor Pressure||< 0.01 mmHg @ 20°C|
|Packaging Dimensions||7.8 in. × 4 in. × 1.3 in.|
|Weight (Packaging)||0.169 lbs.|
|Safety Data Sheet||All Models|