Driver - Peavey, 1", RX 14, high frequency compression, 60W

Driver - Peavey, 1", RX 14, high frequency compression, 60W

Driver - Peavey, 1", RX 14, high frequency compression, 60W image 1
Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
This product is currently out of stock and will be placed on backorder.
Please log in or register to receive an email when this item is back in stock.

The RX14 compression driver is designed for excellent driver performance, reliability and power handling. With over 25 years experience in compression driver design and manufacturing, Peavey is proud to add the all-new RX14 compression driver to its transducer line.


The RX14 is capable of higher power handling than most similiar-sized compression drivers and incorporates a 1.4" voice coil. The RX14 is designed with a solid one-piece titanium diaphragm and a Kapton high-temperature coil former with copper-clad aluminum coil wire for an increase in the overall motor efficiency. The one-piece titanium diaphragm reduces the amount of moving mass, extending the high frequency response of the driver. Ferrofluid cooling is used in the RX14 for improved reliability and smoother frequency response. Every RX14 driver is subjected to a complete series of computer-based tests designed to ensure total adherence to specifications.


The RX14 has been designed and engineered for use with Peavey horns. However, any horn may be used as long as it consists of a standard 1 3/8” – 18 standard thread coupling. The RX14 is an excellent choice for upgrading an older system at minimal expense.


The RX14 driver is designed for use between the frequencies of 1.5 kHz to 20 kHz. However, in our experience as crossover designers for commercial applications, optimum driver performance and reliability can be achieved if the engineer limits the crossover design to 2 kHz as compared to the 1.5 kHz lower limit of the driver.

1" throat diameter, 8 ohms, 60 watts, 1.5-20k response.

Item ID:
Peavey Part Number:
Product Measurements by Type
Continuous Power Rating30 W
D.C. Resistance (Re) 6.8 Ω
Depth2.593 in.
Diameter3.562 in.
DiaphragmCommercially pure titanium
Flux Density1.15 T
Frequency Response1.5 kHz - 20 kHz
Horn Coupling Diameter23.8 mm
Horn Coupling ThreadsStandard 1.375 in. / 18 in.
Impedance, minimum7.1 Ω
Nominal Efficiency30%
Nominal Impedance8 Ω
Peak Power Rating120 W
Program Power Rating60 W
Recommended Crossover1,800 Hz @ 12 dB / Octave
Recommended Minimum Crossover2,000 Hz @ 12 dB / Octave
Sensitivity @ 1W, 1m104 dB SPL, On-axis on 90° H × 45° V horn
Throat Parameter23.8 mm
Voice Coil CoolingFerrofluid
Voice Coil Diameter1.4 in.
Voice Coil MaterialEdge-wound ribbon with high temp Kapton bobbin
Packaging Information
Packaging Dimensions4.4 in. × 4.4 in. × 3.5 in.
Weight (Packaging)2.348 lbs.

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Specification Sheet Specification Sheet392.8 KB

Questions and Answers

No questions have been asked about this product.

Product Reviews

No product reviews yet! Be the first!