Item Unavailable

Sorry! You're trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
P-A-RX14Driver - Peavey, 1", RX 14, 60W

1" throat diameter, 8 ohms, 60 watts, 1.5-20k response.



  • Diameter: 1.4"
  • Throat Parameter: .938" / 23.8 mm
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 7.1 Ohms
  • DC Resistance: 6.8 Ohms
  • Power Capacity 1000 Hz to 20,000 Hz: 120 W peak, 60 W program, 30 W continuous
  • Sensitivity: 104 dB SPL 1 Watt at 1 meterOn-axis on 90° H x 45° V horn
  • Nominal Efficiency: 30%
  • Frequency Response: 1.5 kHz to 20 kHz
  • Recommended Crossover: 1,800 Hz at 12 dB / Octave
  • Lowest Recommended

$49.95
Click to read more
P-AB-18LR-8Speaker Basket - Peavey, 18", Low Rider RB, 8Ω

Peavey Low Rider Replacement Basket (18 inch Low Rider® RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$155.00
Click to read more
P-AD-14XTDiaphragm Kit - Peavey, 14XT Driver

Peavey 14XT™ Diaphragm replacement kits include complete gap cleaning instructions. (To prevent gap contamination by foreign materials, a failed diaphragm assembly should not be removed before a new diaphragm assembly is ready to be installed.)


$27.95
On Backorder
Click to read more
P-AB-S12825Speaker Basket - Peavey S 12825 RB

Peavey Scorpion Replacement Basket (S-12825 RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$74.95
On Backorder
Click to read more
P-AD-CH90Diaphragm - Peavey, CH-90, 8Ω

CDH-90 Horn Diaphram #70777115, 8 Ohm


$16.95
On Backorder
Click to read more
P-AB-1801-8Speaker Basket - Peavey, 1801-8 BW RB, 8Ω

Peavey Black Widow Super Structure Replacement Basket (1801-8 LT BW™ RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$135.00
Click to read more
P-AB-1505-8-KSpeaker Basket - Peavey, 1505-8 KA DT BW RB, 8Ω

Peavey Black Widow Super Structure Replacement Basket (1505-8 KA DT BW™ RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$89.95
Click to read more
P-AB-1502-8Speaker Basket - Peavey, 1502-8 DT BW RB, 8Ω

Peavey Black Widow Super Structure Replacement Basket (1502-8 DT BW™ RB, 8 Ohm). Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can't get any easier than the four steps outlined here: 1) Remove three screws on back of magnet structure. 2) Lift the magnet structure off the basket frame. 3) Clean the voice coil "gap". 4) Align screw holes, lower structure into place on new basket frame, insert screws and tighten.


$99.95
Click to read more
P-AM-SCMagnet - Peavey, for Scorpion
Magnet for Peavey Scorpion speaker.
$72.95
Click to read more
P-AD-PMR30851Diaphragm - Peavey, PMR30851

Dia. 1 Dome Butterfly Diaphram # 70777146, 8 Ohm


$19.95
Click to read more
P-A-LR18-8Speaker - Peavey, 18", Low Rider, 1600W, 8Ω
Sound Reinforcement - Subwoofer


Impedance:
8 Ohms


Power Capacity:
3200 Peak 1600 W Program 800 W Continuous


Sensitivity:
93.7 dB / 1 W 1 m


Usable Freq.
$199.95
Click to read more
P-A-BW12-8Speaker - Peavey, 12", Black Widow 1201-8 BW, 700W
Sound Reinforcement - Low Frequency Driver
The 1201 is an 8 ohm, 12" Black Widow/Super Structure speaker intended primarily for sound reinforcement. Offering superior sensitivity and power handling in a 12" speaker, the 1201 utilizes a Kevlar impregnated cone for a smooth response characteristic well suited to vocals, stage monitors, and other compact applications. This model can also be used to provide outstanding mid-bass performance in a multi-way system.
  • Sensitivity: 98.5 dB / 1W 1 m
  • Usable freq. range: 60 Hz ~ 3.5 kHz
  • Power capacity: 1400 W Peak, 700 W Program, 350 W Continuous
$139.95
Click to read more
P-A-BW15-8Speaker - Peavey, 15", Black Widow 1505-8 DT BW, 700W
Multiple Options Available

Sound Reinforcement - Low Frequency Driver The 1505DT is an 8 ohm, 15" Black Widow/Super Structure speaker with a curvilinear cone for extended bandwidth. Offering a rare combination of usable frequency response into the mid-range with a smooth powerful low end, the 1505DT, Kevlar cone and long voice coil provide excellent linearity at high drive levels. Excellent as a woofer in multi-way enclosures or as the bottom end in a two-way system. Impedance: 8 Ohms Power capacity: 1400 W Peak 700 W Program 350 W Continuous Sensitivity: 99.0 dB / 1 W 1 m Usable freq. range: 40 Hz ~ 2 kHz Cone: Kevlar® impregnated cellulose Voice coil diameter: 4.0" / 100 mm Voice coil material: Aluminum ribbon wire Polyimide-impregnated fiberglass former Nomex® stiffener Solderless diffusion welded OFHC copper leads Net weight lb. / kg: 17 lbs.


$139.95
Click to read more