You are here

Effect Pedals & Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(2 pages)
K-977Effects Pedal Kit - MOD® Kits, Suspended Chime, Chorus w/ Delay
The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up.
Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound.
The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack.
MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
$99.95
Click to read more about this product.
M-FANTAEffects pedal - Tube Amp Doctor, F.A.N.T.A. Speaker Emulator
The F. A. N. T. A. (Frequency Adapted Natural Tone Accessory, say: 'FANTA') Speaker Emulation is a low impedance, balanced symmetric, transformer coupled output. It gets wired between the speaker output of your amp and the speakers and does not require any power supply or battery. The F.A.N.T.A. provides a 3-pin XLR-Connector for a standard microphone cable to connect to the mixing console, recording system etc.
The signal runs through a sophisticated speaker emulation which features a revolutionary unique quality: The emulation is reacting to your playing style!
$92.95
Click to read more about this product.
K-915Effects Pedal Kit - MOD® Kits, The Verb Deluxe, Digital Reverb
The Verb Deluxe kit is built around the Belton Digi-Log Mini Module (P-RBTDR-2H-X) for a great digital reverb sound. The Belton Digi-Log module was built as a replacement for traditional spring reverberation units.
Features include both Dwell and Mix controls, allowing the dry signal to be blended with the processed signal from a just hint of reverb to deep, cavernous echoes.
The dwell control adds an extra flexibility, providing a full palette of sweet reverb sound.
The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$79.95
Click to read more about this product.
K-920Effects Pedal Kit - MOD® Kits, The Piledriver, Power Boost

"The PileDriver" is a clean boost kit that will provide up to 38dB of gain to your guitar signal. Use it to push your preamp into overdrive or as a line driver if you are experiencing signal degradation from your effects chain. This is a simple kit and great for beginners!


$24.95
Click to read more about this product.
M-OD808Effects Pedal - Maxon, OD808, Overdrive
The Original Overdrive! The OD808 is often imitated but never matched! Identical to the 1970s circuit and featuring the JRC4558 IC chip, it offers warm, smooth, transparent overdrive that'll make your rig scream!
The OD808's dynamically responsive circuitry reacts precisely to individual playing styles, letting the true voice of any instrument or artist shine through. Don't settle for copies when you can have the original.
The OD808 Reissue offers up all the warm, creamy, organic overdrive as the original and then some. Never one to rest on their laurels, Maxon has tweaked the current version ever so slightly to reduce noise level while retaining the legendary “808" tone.
The OD808 is the perfect pedal for adding smooth, tube-like overdrive to any clean amp – use it as a secondary dirt channel to beef up a song's chorus section, or keep it on all the time for the crunchy tone that has defined rock and roll.
$149.00
Click to read more about this product.
M-OD9Effects Pedal - Maxon, OD9, Overdrive
Improved circuitry featuring the JRC4558 IC yields the ultra-smooth, creamy, dynamic overdrive so sought after by guitarists.
Overdrive and output level controls adjust the intensity of overdrive and output volume, while the Hi Boost/Hi Cut Tone control adjusts the brightness from warm and smooth to sizzling hot.
While the M-OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar. Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue – this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching.
$159.00
Click to read more about this product.
M-RAT2Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against.
The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads. Do you have a powerful amp with too much headroom for the gig? The RAT 2 nails that sweet spot where a tube amp goes from sparkly clean to warm overdrive. Maybe you already love your amp's distortion. Use the RAT 2 as a boost for solos and get the extra kick you need.
The RAT 2 features the legendary RAT Filter control. Turn it to the right to roll off brittle high-end frequencies. Having trouble cutting through the mix? Turn the Filter down and allow the natural brightness of your instrument to shine through.
$74.95
Click to read more about this product.
K-930Effects Pedal Kit - MOD® Kits, The Persuader, Tube Drive
Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive.
This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions. All you need to provide is solder and soldering iron.
The Persuader allows for easy access to the tube, giving you the ability to quickly experiment with different tube brands and 12AX7 tube relatives.
Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$64.95
Click to read more about this product.
M-AD999Effects Pedal - Maxon, Vintage, AD999, Analog Delay
Just when you thought you'd have to go digital, Maxon unveils the new AD999 Analog Delay. The newest member of the highly touted Maxon Vintage Series, the AD999 is the most ambitious and practical analog delay pedal to come along in ... well, ever!
A few years back the hopes of analog lovers the world over were dashed when Panasonic/Matsushita closed their BBD production line for good. Immediately the price of all types of analog bucket brigade ICs went through the roof, and many larger companies started buying up existing stock and hoarding it for the future. But Maxon is a tough company to hold down, and instead of making the switch to digital as so many other small manufacturers were forced to do, they took a very different approach to solving this problem.
With their vast knowledge of analog technology and their extensive network of contacts in the electronics industry, Maxon was able to source a completely different manufacturer of analog BBDs.
$260.00
Click to read more about this product.
K-970Effects Pedal Kit - MOD® Kits, The Tea Philter, T Filter

The Tea Philter - A T-Filter Pedal Kit The Tea Philter pedal produces a fixed wah tone allowing you to lock it in without rocking the pedal back and forth. Every guitar/wah combination has a certain sweet spot that is perfect for lead and chord work. The Tea Philter lets you dial in everything from your favorite vocal mid-range tone to thick lows. Using point-to-point wiring and easy-to-follow instructions you can have a working fixed wah pedal in a matter of hours. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately.


$31.95
Click to read more about this product.

Pages

(2 pages)
Subscribe to RSS - Effect Pedals & Parts