Pedal Parts / DIY

Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.

High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.71 in
• Diameter: 0.73 in
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.

Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 3-Position
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• Solder lugs

High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The horizontal mount and small footprint of the holder allows for easy placement where vertical space is limited.

The 2N2222A is a NPN transistor in a TO-18 metal case. The 2N2222A is commonly used in fuzz pedals.

Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

Large knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.

• Knob Height = 0.60"
• Pointer Diameter = 1.06"
• Fits 1/4" shaft with set screw
• Oversized Davies 1510 Clone

VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.

Panel mount LED lenses made of high quality polycarbonate. These flat cylindrical lenses provide a unique retro appearance with a small panel footprint and work well in any project using LED indicators. Features:

• ¼” mounting hole
• For panel thicknesses of 1/16” to ⅛”
• Fresnel lens
• Flat cylindrical shape
• Fits standard 5mm LEDs

Black pointer with white line. Fits a 3/16" knurled shafts. Push on Peavey part: 70902145

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K310X.

Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.

Prewired low-profile LED bezel with a diffused LED. With a 0.07” height, this black metal LED bezel has an almost flush appearance on the panel it’s mounted to. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and rubber o-ring included.

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.

The 2N4125 is a general purpose silicon NPN transistor in a TO-92 case. The 2N4125 is primarily intended for general purpose amplification. It is a popular choice for silicon fuzz pedals due to its low hFE specifications. It has also been used in a variety of classic pedals such as the Phase 90.

Rubber caps / switch tips for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.

Surface mount MMBFJ201 JFETs presoldered to TO-92 adapter boards. Use wire, clipped component leads, or pin headers to easily attach these adapters to PCBs using TO-92 footprints for J201s. These JFETs can be found in many effects pedals, synthesizers, and other projects. The J201 / MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources. The pinout is marked on the PCB and is DSG when facing the component side.

100kΩ dual-gang 16mm potentiometers with a solid shaft and a linear taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)
• Shaft Diameter: 6.35 mm (0.25”)

Dome shaped rubber feet with an embedded 6-32 machine screw. These feet have a 0.4375 inch diameter and have a 0.25 inch screw length. The embedded screw provides a sleek appearance. These are great feet and can also be used as bumpers.

2N169 NPN germanium transistors in an oval package. The oval package is sometimes referred to as a top hat package. The 2N169 is a popular NPN for fuzz pedals and other effects. The NPN polarity allows for use with standard pedal power supplies.

High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.

• 5mm size
• Water clear
• High brightness
• Multiple colors available
• Package of 5

Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.

2N4061 PNP transistors. This is a silicon PNP transistor in a TO-92 package. The 2N4061 has been used in a variety of effects pedals and is most notably used in the Zonk Machine II.

Alpha Mini Pots with solid shaft and short PC mount terminals.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 3.8 mm (0.150”)
• Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
• Lead Thickness: 0.5 mm (0.020”)