Pedal Parts / DIY

Knob - Davies, 1600 & 1610, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.59 in.
  • Diameter: 0.91 in.
  • Fits ¼" shaft with set screw

The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.69 in.
  • Diameter: 1.5 in.
  • Fits ¼" shaft with set screw
$3.09
Knob - Davies, 1910 and 1913, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
  • Height: 0.50 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw

Davies 1913 (Large)
  • Height: 0.625 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw
$2.75
Knob - Davies, 1470, Daka-ware, Large, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.
  • Height: 0.50 in.
  • Length: 1.13 in.
  • Fits ¼" shaft with set screw
Starting at $2.55
Knob - Davies, 1550, Daka-ware, Large, Skirted Pointer
High-quality USA made knobs from Davies Molding. The large skirted 1550 pointer knob is made of solid phenolic and features a white indicator line. The pointer has an overall length of 1.19” and the skirt’s diameter is 1.13”.
  • Height: 0.625 in
  • Length: 1.19 in.
  • Fits ¼" shaft with set screw
$1.75
Knob - Davies, 1400, Daka-ware, Small, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.
  • Height: 0.38 in.
  • Length: 0.84 in.
  • Fits ¼" shaft with set screw
$1.99
Knob - Rogan, PT Series, 1P, Small, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.55 in.
  • Diameter: 0.45 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65
Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.71 in.
  • Diameter: 0.57 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65
Knob - Rogan, PT Series, 2P, Medium, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.68 in.
  • Diameter: 0.50 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65
Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
$1.65
Knob - Rogan, PT Series, 1P, Small, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.55 in.
  • Diameter: 0.45 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in.
  • Diameter:0.57 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 1S, Small, Skirted, D-Shaft
Colors Available:
High-quality USA made knobs from Rogan Corp. These small, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in.
  • Diameter: 0.57 in.
  • Fits 6mm D Shafts
  • No indicator

A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 2P, Medium, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.68 in.
  • Diameter: 0.50 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 2S, Medium, Skirted, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits 6mm D Shafts
  • No indicator

A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 3PS, Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in
  • Diameter: 0.73 in
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.75
Knob - Rogan, PT Series, 5PS, Wide, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.45 in.
  • Diameter: 0.84 in
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.85
Knob - Rogan, PT Series, 6PS, Extra Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.63 in.
  • Diameter:1.25 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.95
Knob - Chicken Head, set screw, brass inset
Colors Available:
  • Fits ¼" Solid Shafts (Set Screw)
  • Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
  • Brass Set Screw and Insert
  • High Quality Plastic
Starting at $1.30
Knob - Chicken Head, Raised, set screw, brass insert
Colors Available:
Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.
$1.10
Knob - Phenolic, Set Screw, Gaunt Chicken Head
High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.67 in.
  • Length: 1.26 in.
  • Fits ¼" shaft with set screw
$1.20
Knob - Aluminum, Notched Tip Indicator, Set Screw, .75" Diameter
Colors Available:
¾" dia. Knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
$2.99
Knob - Vintage "cupcake" style, set screw, brass insert
Colors Available:
Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.
Starting at $1.99
Knob - Fender®, Black Chicken-Head
Original Fender chicken head knob. Black, comes in a package of six. Set screw. For 1/4" solid shaft pots.
$19.95
package of 6