Pedal Parts / DIY

The BC182 is a general purpose NPN transistor in a TO-92 case. The BC182 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC182 has a more narrow hFE range than the BC183 which can be helpful for certain builds.

A semiconductor device which passes current in the forward direction(from anode to cathode), and blocks current in the opposite direction. For extreme fast switches.

The BC181 is a general purpose PNP transistor manufactured by Texas Instruments. This low-power PNP bipolar junction transistor is in a TO-92 case.

IC component sockets for dual in-line package chips (DIP, PDIP, DIL, DIPP.) These sockets feature ladder style cases with tinned stamped and formed connections.

Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.

Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.

General purpose low level, low noise amplifier. Silicon NPN transistor.

EMI / RFI screen (grounding washer) for S2 and S4 Cliff jack sockets. This lock washer is added to S2/S4 Cliff jacks to provide a chassis/shield connection for the connection. Jacks sold separately.

RC4558 dual op amp in an 8-pin DIP package. The RC4558 device is a dual general-purpose operational amplifier, with each half electrically similar to the µA741, except that offset null capability is not provided. The high common-mode input voltage range and the absence of latch-up make this amplifier ideal for voltage-follower applications. The device is short-circuit protected, and the internal frequency compensation ensures stability without external components. Features

• Continuous Short-Circuit Protection
• Wide Common-Mode and Differential Voltage Ranges
• No Frequency Compensation Required
• Low Power Consumption
• No Latch-Up
• Unity-Gain Bandwidth: 3 MHz Typ
• Gain and Phase Match Between Amplifiers
• Low Noise: 8 nV/√Hz Typ at 1 kHz

Applications

• DVD Recorders and Players
• Pro Audio Mixers

The 2N3392 is a general purpose NPN transistor in a TO-92 case. The 2N3392 is used in some original silicon Fuzz Face pedals as well as the Brassmaster fuzz.

The 2N3704 is a general purpose silicon NPN transistor in a TO-92 case. The 2N3704 is primarily intended for general purpose amplification and switching applications.

The BAT41 is a schottky diode used in many DIY projects. General purpose metal to silicon diode featuring very low turn-on voltage and fast switching. This device has integrated protection against excessive voltage such as electrostatic discharges.

Polyester film dielectric, aluminum foil electrode, copperply leads and epoxy resin coating in inductive type.

• Small size, light weight and low cost
• Dissipation factor is small because the leads are directly welded to electrodes
• Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
• 100 volt rating
• Operating temperature range: -40°C to +85°C.
• Package of 5

1N5408 Diode. Lead mounted standard recovery rectifiers are designed for use in power supplies and other applications having need of a device with the following features:

• High Current to Small Size
• High Surge Current Capability
• Low Forward Voltage Drop

A semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.

Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.

• 3/8” thread diameter/20 TPI
• 3/16” thread length
• 7/16” nut
• Used on many Marshall amps
• Matte black finish
• Sold individually.

The BC183A transistors manufactured by ITT. The BC183A is a general purpose NPN transistor in a TO-92 case. It is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. A version of the BC183A, the BC183KA can be found in some vintage Fuzz Face pedals.

The 2N4123 is a general purpose silicon NPN transistor in a TO-92 case. The 2N4123 is primarily intended for general purpose amplification. It is a popular choice for silicon fuzz pedals due to its low hFE specifications.

Surface mount MMBFJ201 JFET. Commonly used in place of the discontinued through-hole J201. These JFETs can be found in many effects pedals, synthesizers, and other projects. The MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources.

MPSA63 PNP Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = -30V
• Max collector to base voltage = -30 V
• Max emitter to base voltage = -10 V
• Max collector current = -0.5 A (continuous)

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Package of 5. These resistors are perfect for pedal builders! 1/4 watt.

General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects. This version is lead free.
For a lead free 2N3906 see P-Q2N3906-LF.

Genuine Cliff ferrule for internal thread S4 jacks (3/8-20). This matte black ferrule works great with the S-H960-X washers to provide a unique look for inputs on amplifiers, pedals, and other equipment.

Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.