Pedal Parts / DIY

Battery Clip - Premium, 9 Volt, Rigid Frame, T-Style
Premium 9V battery clip with a rigid plastic frame. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
$1.15
Battery Clip - Premium, 9 Volt, Rigid Frame, I-Style
Premium 9V battery clip with a rigid plastic frame and I-style wire orientation. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
$1.20
Battery Clip - Premium, 9 Volt, Rigid Frame, T-Style, Shielded Eyelets
Premium 9V battery clip made of a rigid plastic frame with an insulating wall enclosing the battery terminals. This high quality battery snap features nickel-plated brass contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
$1.15
Covers - for Chassis Holes, Nickel-plated Steel
High quality chassis hole covers for a wide variety of hole sizes. These covers use tapered tabs that easily snap into the hole to securely hold the cover in place. If a more permanent solution is required, the metal tabs can be bent outward after installing to secure the hole cover to the chassis. These nickel plated covers are a great way to modify an existing chassis or cover up mistakes. This list shows some common hole sizes for a variety of parts used on amplifiers, pedals and other equipment.
Starting at $0.95
Power Supply - Dunlop, 9V, 200mA, 3.5mm Positive Tip
This AC adapter powers several older models of Dunlop pedals, which required a 3.5 mm, or 1/8”, plug as opposed to the 5.5mm x 2.1mm barrel plug required by current models.
  • Voltage: 9VDC
  • Current: 200mA
  • Tip positive; Sleeve negative
$13.45
Power Supply - Dunlop, 9V, 200mA, Barrel, Center Negative

Dunlop ECB003 US wallwart power supply. Barrel connector.

  • Voltage: 9VDC
  • Current: 200mA
  • Tip Negative; Sleeve positive
$12.70
Power Supply - Dunlop, 18V A/C Adapter
The Dunlop 18V power supply for Dunlop effects will save you some money on batteries and get the right power to your pedal! Features Include:
  • 18 volts of regulated DC current
  • 2.1 mm x 5.5 mm plug with negative center

Compatible Dunlop pedals include:
  • Older Crybaby Multi-Wah
  • SW-95 Slash Wah
  • M108 10-band EQ
  • KFK1 10-band EQ
  • M117R Flanger
  • EVH 117 Flanger
  • DD11 Dime Distortion
  • M134 Chorus
  • M181 Bass Blowtorch

Plus many other pedals requiring an 18vdc power supply!
$16.30
Switch - Dunlop, Footswitch, GCB-95
GCB-95 latching switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
$12.43
Knob - Dunlop, Large Aluminum MXR, Push-On
Genuine Dunlop / MXR large aluminum knob for use with T18 knurled pot shafts. This rugged aluminum knob features a white indicator line and a diamond cut knurl for grip when using it. This high end knob looks great on pedals, amplifiers, and other projects.
$3.85
Knob - Dunlop, Cosmod, Small Plastic MXR, Push-On
Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.
$2.50
Grommets - Dunlop, Offset, 3x4 Different Sizes
Original Dunlop offset grommets (i.e. rubber bumpers) used on the underside of the treadle piece (rocking structure) of wah pedal enclosures. Made in USA.
$7.30
package of 12
Gear - Dunlop, replacement for Wah D-shaft pots
Original Dunlop replacement gear for wah potentiometers (C-ring included). The gear has 14 teeth and a flatted inner diameter to fit securely onto a potentiometer with flatted shaft. The included C-ring is placed over the top end of the gear to keep it from sliding off the end of the potentiometer shaft.
$4.95
Rack - Dunlop, replacement for wahs
Original Dunlop replacement rack for wah pedals (roll pin included: 0.77" length x 0.07" diameter - for mounting the rack to the treadle). The rack has 14 teeth and mounts to the underside of the treadle piece (rocking structure) of a wah pedal. The teeth of the rack interlock with the teeth of the wah potentiometer gear (i.e. pinion), thereby rotating the potentiometer's shaft as the treadle is rocked back and forth.
$2.79
Tread - Dunlop, rubber, replacement for Wahs
Genuine Dunlop replacement tread pad for Cry-Baby wah pedals. Adhesive backed for easy installation and labeled on top surface to indicate amplifier and instrument inputs.
$7.03
Knob - Dunlop, MXR Knob for pedals, skirted
Large MXR knob with set screw for MXR pedals. Original Dunlop replacement part. Skirted knob with white line and dot indicator.
$3.70
Knob Cover - Dunlop, rubber, for MXR knobs
Replacement black rubber knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.
$2.19
Knob Cover - Dunlop, MXR, small rubber
Genuine Dunlop replacement knob cover for smaller control knobs found on many MXR pedals. This knob cover is also compatible with our P-K344 control knob.
$2.65
Rubber feet - Dunlop, for Crybaby, includes screws
Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)
$3.95
package of 4
Bottom Plate - Dunlop, for GCB-95 with Battery Door
Bottom Plate for GCB-95. Original Dunlop replacement part. Includes battery box, four mounting screws and four black rubber feet.
$14.35
Knob - Dunlop, Jimi Hendrix Fuzz Face JH-F1
Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$7.65
Potentiometer - Dunlop, MXR, 47K, PC mount
Genuine Dunlop replacement potentiometer for Dunlop/ MXR pedals. PC mount, 47K audio taper, knurled shaft.
$6.03
Switch - Dunlop, PCB mount, boost / distortion kick switch
ECB233 boost / distortion kick switch. Original Dunlop replacement part. Used in the SW95 Crybaby Slash Wah. Through hole PCB mount.
$6.95
Battery Box - Dunlop, snap-in enclosure
Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.
$2.50
Potentiometer - Dunlop Hot Potz, 470 kΩ
Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470 kΩ. Original Dunlop replacement part.
$23.50