You are here

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects.

Build a kit or purchase parts to make your own!

 

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(14 pages)
P-H1590LBChassis Box - Hammond, Unpainted Aluminum, 1.99" x 1.99" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$6.03
$5.43
You save: 10%
Click to read more
K-980Effects Pedal Kit - MOD® Kits, The Persuader Deluxe, Overdrive
The Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion.
Four dual triode vacuum tubes are included with each kit (JJ 5751, 12AX7B China, JJ 12AU7 and a NOS USA-made 12AT7). Swap to create a wide range of tones from just a hint of break up from the JJ 5751 to over the top crunchy distortion using the NOS US made 12AT7.
A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode.
Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$99.95
$89.96
You save: 10%
Click to read more
P-ECB-31Felt Pad - Dunlop, for Wahs
$1.25
$1.13
You save: 10%
Click to read more
P-ECB-78Potentiometer - Dunlop, 10K linear
Genuine Dunlop replacement potentiometer for wah/volume.
  • 10K Linear
  • Gear included
$13.95
$12.56
You save: 10%
Click to read more
P-H604Switch - Footswitch, SPST, Off-(On), Solder Lugs, Soft Switch
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch. Solder lugs, soft switching.

These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications.

Depressing the switch shorts the lugs together and when the switch is released it returns to it’s non connected state with no click.

  • SPST momentary switch
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included


Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$2.50
$2.25
You save: 10%
Click to read more
K-970Effects Pedal Kit - MOD® Kits, The Tea Philter, T Filter

The Tea Philter - A T-Filter Pedal Kit The Tea Philter pedal produces a fixed wah tone allowing you to lock it in without rocking the pedal back and forth. Every guitar/wah combination has a certain sweet spot that is perfect for lead and chord work. The Tea Philter lets you dial in everything from your favorite vocal mid-range tone to thick lows. Using point-to-point wiring and easy-to-follow instructions you can have a working fixed wah pedal in a matter of hours. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately.


$31.95
$28.76
You save: 10%
Click to read more
P-H1590BBCE-XChassis Box - Diecast Aluminum, Colored
Colors Available:

Cool chassis box perfectly suited for effects pedals and other DIY projects.



  • 4.67" x 3.68" x 1.18"
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Painted

$9.25
Starting at $7.95
You save: 14%
Click to read more
K-930Effects Pedal Kit - MOD® Kits, The Persuader, Tube Drive

Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive. This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions. All you need to provide is solder and soldering iron. The Persuader allows for easy access to the tube, giving you the ability to quickly experiment with different tube brands and 12AX7 tube relatives. Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.


$64.95
$58.46
You save: 10%
Click to read more
P-H1590BBCEChassis Box - Diecast Aluminum, 4.7" x 3.7" x 1.18"

Same as Hammond P-H1590BB but a generic manufacture from Taiwan. 4.7" x 3.7" x 1.18" depth.


$8.95
$8.06
You save: 10%
Click to read more
P-H498-PCSwitch - Footswitch, DPDT, PC Mount

DPDT footswitch, PC mount, same switch as P-H497 but made in Taiwan and PC mount.


$3.95
$3.56
You save: 10%
Click to read more

Pages

(14 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts