Pedal Parts / DIY

Capacitor - 50V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.
$0.60
package of 5
Capacitor - Kemet, R82 Series, Polyester, 5mm Spacing
High quality R82 Series box film capacitors from Kemet. These polyester film capacitors have 5mm lead spacing, a minimum voltage rating of 63VDC, and a tolerance of ±10% or better. The small size, high specifications, and radial mounting makes them an excellent choice for PCB builds of pedals, synthesizer, and other audio equipment. The R82 Series is constructed of metallized polyester film with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94V–0 requirements.
  • Voltage rating: 63 VDC Minimum
  • Lead Spacing: 5 mm
  • Capacitance tolerance: ±10% or better
  • Operating temperature range of -55˚C to +105˚C
  • RoHS compliance and lead-free terminations
  • Self-healing
Starting at $0.25
Capacitor - Mod® Electronics, 50V, Oil Filled, Axial Lead
Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil. The 50V series are in smaller packages that are perfect for guitars, effects and more.
  • Casing: Hermetically sealed aluminum
  • Dielectric: Mineral oil
  • Lead Diameter: 20AWG
  • Termination Style: Axial
  • Tolerance: ±10%
  • Values: .001 μF - .047 μF
  • Voltage Rating: 50V
Starting at $5.50
Capacitor - Philips, KT-347, 400V, .015uF, Polyester Film
New old stock radial capacitors from Philips with 10mm lead spacing. The KT-347 series capacitors feature the same lacquer coating as the Mullard / Philips mustard caps found in classic Marshall amps and many vintage pedals. These NOS caps feature a low-inductive wound cell of metal foil and a polyethylene terephthalate film.
$2.25
Capacitor - Siemens, 250V, .1uF, Film
New old stock radial capacitors from Siemens with 10mm lead spacing. These 0.1uF film capacitors are rated for 250V. The construction matches the style found in vintage equipment such as the MKIII and MKIV Tone Bender pedals.
$5.95
Capacitor - Siemens, 250V, .22uF, Film
New old stock radial capacitors from Siemens with 10mm lead spacing. These 0.22uF film capacitors are rated for 250V. The construction matches the style found in vintage equipment such as the MKIII and MKIV Tone Bender pedals.
$5.95
Capacitor - Vishay BC, Aluminum Electrolytic, 021 ASM Series, Axial Lead
High quality axial-leaded electrolytic capacitors. These 021 ASM series capacitors are produced by Vishay BC, formerly known as Philips / BC. These capacitors have been produced for many years and can be found in a wide variety of music equipment ranging from vintage amps by Vox and Marshall to classic fuzz pedals such as the Fuzz Face and Tonebender. Suggested applications include general purpose use, industrial, automotive, audio-video, coupling, decoupling, smoothing, filtering, buffering, portable and mobile equipment. Features
  • Long useful life: 2500 h to 8000 h at 85 °C
  • Miniaturized, high CV-product per unit volume
  • Charge and discharge proof
  • Polarized aluminum electrolytic capacitors, non-solid electrolyte
  • Axial leads, cylindrical aluminum case, insulated with a blue sleeve
Starting at $1.75
Capacitor - Vishay Roederstein, 400V, MKT1813, Axial Lead
High quality axial capacitors rated at 400V. These MKT1813 capacitors are produced by Vishay Roederstein, formerly known as ERO. These capacitors are made with metalized polyester film and sealed in epoxy resin. Suggested applications include blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. Features
  • Plastic-wrapped, epoxy resin sealed, flame retardant encapsulation
  • Non polar
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Operational life greater than 300,000 hours (40 °C/0.5 UR)
Starting at $1.95
Center Punch - Spring Loaded, Adjustable Force
Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.
$6.45
Chassis - Mod® Electronics, MK1 Fuzz, Pre-drilled, Folded 16 ga. Steel
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original MK1 Tone Bender enclosures and is pre-drilled to match the original layout of the MK1 pedal. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The MK1 fuzz enclosure features a removable bottom door for easy access to the battery. All required screws and rubber feet are included.
$49.95
Chassis - Mod® Electronics, Wedge Shaped Fuzz, Pre-drilled, Folded 20 ga. Steel
Pre-drilled wedge shaped pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original FZ-1 and FZ-1A Fuzz Tone enclosures but the predilled layout is inspired by the Octavio and the early Carlsbro fuzz. This provides a classic pedal design with a layout that is more compatible with modern pedalboards than the original Fuzz Tone layout. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The wedge shaped fuzz enclosure features a hinged bottom cover for easy access to the battery. The four screws that attach the bottom are included.
$36.95
Chassis - Mod®, Buzzaround, Pre-drilled, Hammered Dark Gray
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.
$74.95
Chassis - Three Knob Fuzz, Pressed Steel
Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.
  • Footswitch Hole Diameter: 0.492 in. (12.5mm)
  • Potentiometer Hole Diameter: 0.294 in. (7.47mm)
  • Jack Hole Diameter: 0.447 in. (11.35mm)
$19.95
Chassis Box - 1032L, Diecast, Looper, 10" x 2.75" x 1.89"
Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box. Add 0.16" to enclosure depth for lid.
$10.99
Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
Starting at $6.29
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Starting at $5.95
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Blue
Limited Run!
1590B diecast enclosure finished in a hammered blue powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered blue powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU C65 (Gorva) P-H1590N1-GORVA-HMT-BLU S90 (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$14.95
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Bronze
Limited Run!
1590B diecast enclosure finished in a hammered bronze powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Green
Limited Run!
1590B diecast enclosure finished in a hammered green powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Silver
Limited Run!
1590B diecast enclosure finished in a hammered silver powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered silver powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid
$14.95
Out of Stock
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
Chassis box perfectly suited for effects pedals and other DIY projects.
Starting at $5.40
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Bronze
Limited Run!
1590BB diecast enclosure finished in a hammered bronze powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Green
Limited Run!
1590BB diecast enclosure finished in a hammered green powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Silver
Limited Run!
1590BB diecast enclosure finished in a hammered silver powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered silver powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.
$14.95
Out of Stock