Pedal Parts / DIY

Our 3PDT PCB daughterboard is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired, and decreasing the chances of wiring mistakes or short-circuits.

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.71 in.
• Diameter:0.57 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.

High quality 22AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required.

Temporary Heat Sink. Absorb & dissipate heat during soldering/desoldering sensitive parts. Made in Taiwan.

Holder for mounting LEDs to panels.

The 1N914 is a small signal diode similar to the 1N4148 and is common in many older electronics. The 1N914 is general purpose and can be used in a multitude of different applications.

2N404A PNP germanium transistors. The 2N404A is used in many fuzz pedals along with other effects. The 2N404A is the same as the 2N404 but with a higher voltage rating. This transistor is in a TO-5 package with long leads commonly found on germanium transistors. For a lower voltage version of this transistor, see P-Q2N404.

Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.

High quality PCB mount 3PDT footswitch from Alpha. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 11.5mm
• Threading: M12 x 0.75
• PCB mount pins

Reverse audio taper 16mm solid shaft potentiometers with solder lug terminals. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Reverse Audio (Anti-Log)

Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.

Panel mount led lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:

• ¼” mounting hole
• For panel thicknesses of 1/16” to ⅛”
• Fresnel lens
• Low Profile

For a version that fits 3mm LEDs, see P-L310-X.

Horizontal 1/4" jack, all contacts switched, plastic housing with nut and washer, solder tap version

The Switchcraft Type 111X enclosed ¼” jack is a high quality mono jack. This jack has two solder lugs. One for the tip and one for the sleeve. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer.

• Type 111X
• 0.276" bushing length (standard)
• Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
• Mono 2-Conductor
• Includes nut and washer

See W-SC-112BX for stereo

#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X

General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects.

High quality crush-proof boxes that are perfectly sized for stompboxes. This cardboard box features triple wall sides and double wall front and bottom ensuring a safe housing for your pedals. The inside dimensions 5” x 3” x 3" fit 1590B, 1590G, 1590N1, and 125B. These boxes are ideal for storing or packaging effects pedals.

New old stock 2N3565 transistors manufactured by Micro Electronics. The 2N3565 is a silicon NPN transistor in a TO-106 case. The 2N3565 is primarily intended for general purpose and low level applications. 2N3565 transistors were used in the original Harmonic Percolator, Foxx Tone Machine and the Sam Ash Fuzzz Boxx.

5W zener diodes that are great for use in tube amps. These are commonly used to drop B+ voltages for tube modification compatibility or to create low power modes for the amp. A zener is a semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.

Premium 9V battery clip with a rigid plastic frame and I-style wire orientation. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.

BC109 NPN silicon transistors. The BC109 is a popular NPN choice for fuzz pedals and other effects such as vintage silicon Fuzz Face builds and Big Muff clones. Type hFE (IC=2mA, VCE=5V) hfe (IC=2mA, VCE=5V, f=1KHz) BC109B 200-450 240-500 BC109C 420-800 450-900

The BC183A transistors manufactured by ITT. The BC183A is a general purpose NPN transistor in a TO-92 case. It is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. A version of the BC183A, the BC183KA can be found in some vintage Fuzz Face pedals.

Fender® Style replacement ¼" stereo input jack that has 9 PCB mount terminals.

Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil. The 50V series are in smaller packages that are perfect for guitars, effects and more.

• Casing: Hermetically sealed aluminum
• Dielectric: Mineral oil
• Lead Diameter: 20AWG
• Termination Style: Axial
• Tolerance: ±10%
• Values: .001 μF - .047 μF
• Voltage Rating: 50V