You are here

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects.

Build a kit or purchase parts to make your own!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(12 pages)
P-H1590BXChassis Box - Hammond, Diecast Aluminum, 4.37" x 2.37" x 1.22"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Starting at $7.07
Click to read more
M-PAS-CABLE-1Cable - Power All, 5 Lead Right Angle Daisy Chain

Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the PA-9 Power-All to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices


$7.50
Click to read more
P-H497Switch - Carling, Footswitch, DPDT, On-On, Side Solder Lugs
Good stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V

Note: On-On switches may sometimes be referred to as On-None-On.
$7.95
Click to read more
P-H501-PCSwitch - Footswitch, 3PDT, Blue, PC Mount

3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.


$7.95
Click to read more
P-H552XFootswitch - Carling, SPST, Solder Lugs

Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.


$7.95
Click to read more
P-H590-XSwitch - Footswitch, 3PDT, LED Ring
Colors Available:

3PDT. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.


Starting at $7.95
Click to read more
P-H1590BBCE-XChassis Box - Diecast Aluminum, 4.67" x 3.68" x 1.18"
Colors Available:

Chassis box perfectly suited for effects pedals and other DIY projects.


Starting at $8.95
Click to read more
P-H1590BBXChassis Box - Hammond, Aluminum, 4.67" x 3.68" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Starting at $9.42
Click to read more
P-ECB-035Switch - Dunlop, Footswitch, GCB-95

GCB-95 switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.


$9.95
Click to read more
P-H1590BBCE-PDChassis Box - Aluminum, 4.67" x 3.68" x 1.18", pre-drilled
Same as Hammond P-H1590BB, but generic manufacture made in Taiwan. Measures 4.67" x 3.68" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ ½" dia., 2 @ 3/8" dia, and 2 @ 8 mm dia.
$9.95
Click to read more

Pages

(12 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts