You are here

Effect Pedals & Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(13 pages)
P-ECB-126Gear - Dunlop, for Wah
Original Dunlop replacement gear for wah potentiometers (C-ring included).
The gear has 14 teeth and a flatted inner diameter to fit securely onto a potentiometer with flatted shaft. The included C-ring is placed over the top end of the gear to keep it from sliding off the end of the potentiometer shaft.
$1.95
$1.72
You save: 12%
Click to read more
P-ECB-156Inductor - Dunlop, for Crybaby, 500mH
500mH inductor for all Crybaby models. Original Dunlop replacement part.
$11.50
$10.12
You save: 12%
Click to read more
P-ECB-151Rubber feet - Dunlop, for Crybaby, includes screws

Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)


$2.50
$2.20
You save: 12%
Click to read more
P-H1590XXChassis Box - Hammond, Unpainted Aluminum, 5.3" x 4.4" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$12.39
$10.90
You save: 12%
Click to read more
P-H1590LBChassis Box - Hammond, Unpainted Aluminum, 1.99" x 1.99" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$5.84
$5.14
You save: 12%
Click to read more
M-PAS-CABLE-2Cable - For Power All Systems, C-11/R
Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.
Plugs: (11): Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 10 mm. Spring-loaded right-angle male plugs
Cable length: 3962.4 mm (approximately 156 inches) total, 270 mm (10.5") between jacks.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$15.00
$13.20
You save: 12%
Click to read more
M-PAS-CABLE-7Cable - For Power All Systems, C-R/R
Included in the Power-All System and also available separately, the Cable-Red/R allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection.
The Cable-Red/R can be hooked to any plug on any of the Power-All daisy chains, or directly to the Power-All.
Length: Cable-Red/R is 140 mm (approximately 5.5 inches) in length from plug to plug.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$3.00
$2.64
You save: 12%
Click to read more
P-ECB-RACKRack - for wahs and other pedals
Generic rack with 18 teeth for wah and other pedals using rack and pinion potentiometer shaft rotation.
(Length = 1.91", width = 0.19", height = 0.25". Mounting hole diameter = 0.075")
$0.50
$0.40
You save: 20%
Click to read more
M-OD808Effects Pedal - Maxon, OD808, Overdrive
The Original Overdrive! The OD808 is often imitated but never matched! Identical to the 1970s circuit and featuring the JRC4558 IC chip, it offers warm, smooth, transparent overdrive that'll make your rig scream!
The OD808's dynamically responsive circuitry reacts precisely to individual playing styles, letting the true voice of any instrument or artist shine through. Don't settle for copies when you can have the original.
The OD808 Reissue offers up all the warm, creamy, organic overdrive as the original and then some. Never one to rest on their laurels, Maxon has tweaked the current version ever so slightly to reduce noise level while retaining the legendary “808" tone.
The OD808 is the perfect pedal for adding smooth, tube-like overdrive to any clean amp – use it as a secondary dirt channel to beef up a song's chorus section, or keep it on all the time for the crunchy tone that has defined rock and roll.
$149.00
$131.12
You save: 12%
Click to read more
M-OD9Effects Pedal - Maxon, OD9, Overdrive
Improved circuitry featuring the JRC4558 IC yields the ultra-smooth, creamy, dynamic overdrive so sought after by guitarists.
Overdrive and output level controls adjust the intensity of overdrive and output volume, while the Hi Boost/Hi Cut Tone control adjusts the brightness from warm and smooth to sizzling hot.
While the M-OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar. Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue – this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching.
$159.00
$139.92
You save: 12%
Click to read more

Pages

(13 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts