 | Chassis Box - Hammond, Unpainted Aluminum, 7.38" x 4.70" x 3.07"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Six 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
| $20.65 | Click to read more |
 | PC Board - Dunlop, for CrybabyOriginal Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.
| $21.95 | Click to read more |
 | Potentiometer - Dunlop, 20K, Custom Taper, Wah Pot, for BassCustom taper 20k Dunlop potentiometer used in 105Q Crybaby Bass Wah. 1 million cycles, maintenance free.
| $19.95 | Click to read more |
 | Knob - Dunlop, MXR Knob for PedalOriginal MXR knob for Dunlop pedal. Original Dunlop replacement part. Set Screw
| $2.95 | Click to read more |
 | Tread - Dunlop, rubber, for Wahs Genuine Dunlop replacement tread pad for Cry-Baby wah pedals. Adhesive backed for easy installation and labeled on top surface to indicate amplifier and instrument inputs. | $2.95 | Click to read more |
 | Battery Box - Gotoh, single, 9 volt Single 9 volt battery box.
See P-ECB-9V1B for single battery box with removable adapter.
See P-ECB-9V2 for double battery box. | $13.95 | Click to read more |
 | Chassis Box - Diecast Aluminum, ColoredCool chassis box perfectly suited for effects pedals and other DIY projects.
- 4.67" x 3.68" x 1.18"
- Die-Cast Aluminum
- Includes Box, Lid, And Screws
- Painted
| $9.25 Starting at $7.95 You save: 14% | Click to read more |
 | Battery Box - Gotoh, Dual, 9 Volt Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries.
Four wood screws included.
Directions:
1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24")
2. Put the box in guitar body and fix it by screws. | $19.00 | Click to read more |
 | Reverb Module - Accutronics, Digi-Log, Mini, Vertical MountMultiple Options Available BTDR-2 DIGI-LOG REVERB MODULE A great digital reverb sound that easily replaces a spring reverberation unit Features:
- Small package is half the size of the BTDR-1
- Stereo outputs may be summed for mono operation
- Simple interface requires only input, output, +5V, and ground
- AC-coupled input and outputs require no external capacitors
Please see http://www.accutronicsreverb.com for more info.
| $14.95 | Click to read more |
 | Reverb Module - Accutronics Belton, Digi-Log, Adjustable DecayA great digital reverb sound that easily replaces a spring reverberation unit
Features:
- Reverb depth (decay adjustable via 2 external resistors or 1 dual potentiometer
- Stereo outputs may be summed for mono operation
- Simple interface: input, output, +5V, and ground
- AC-coupled input and outputs require no external capacitors
Specifications:
PARAMETER
SYMBOL
MINIMUM
TYPICAL
MAXIMUM
UNIT
Supply Voltage
Vcc
4.5
5.0
5.5
V
Supply Current
Icc
60
100
mA
Input Voltage
Vin
1.5
Vpeak
Voltage Gain
-3
dB (>10kOhm load)
Residual Noise
-77
dBV
Input Impedance
Zin
10k
Ohm
Output Impedance
Zout
220
Ohm
Operating Temperature
-40
| $15.95 | Click to read more |