You are here

Effect Pedals & Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(13 pages)
P-H1590F
P-H1590F
Item ID: 002415
Chassis Box - Hammond, Unpainted Aluminum, 7.38" x 7.38" x 2.48"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$25.98
Click to read more
P-H1590X
P-H1590X
Item ID: 002420
Chassis Box - Hammond, Unpainted Aluminum, 5.3" x 4.4" x 2.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$13.65
Click to read more
P-ECB-40
P-ECB-40
Item ID: 002066
Jack - Dunlop, ¼", Stereo, for effects pedals

Stereo jack for Dunlop effects pedals. Original Dunlop replacement part.


$3.35
Click to read more
M-PAS-CABLE-3
M-PAS-CABLE-3
Item ID: 039904
Cable - For Power All Systems, C-BK/R
Included in the Power-All System and also sold separately, the Cable-Black/R allows the user to power over-sized effect units or units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain. The Cable-Black can be connected to any plug on any Power-All daisy chain, or directly to the PA-9 itself.
Plug: 5.5 mm W x 10 mm L with 2.1 mm internal diameter and spring-loaded plug.
Length: 267 mm (approximately 10.5 inches) between plugs.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$3.00
Click to read more
M-RAT2
M-RAT2
Item ID: 001867
Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against.
The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads. Do you have a powerful amp with too much headroom for the gig? The RAT 2 nails that sweet spot where a tube amp goes from sparkly clean to warm overdrive. Maybe you already love your amp's distortion. Use the RAT 2 as a boost for solos and get the extra kick you need.
The RAT 2 features the legendary RAT Filter control. Turn it to the right to roll off brittle high-end frequencies. Having trouble cutting through the mix? Turn the Filter down and allow the natural brightness of your instrument to shine through.
$79.95
Click to read more
P-H1590N1
P-H1590N1
Item ID: 002417
Chassis Box - Hammond, Unpainted Aluminum, 4.77" x 2.6" x 1.39"
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
$10.29
Click to read more
P-RBTDR-2H-X
P-RBTDR-2H-X
Item ID: 005028
Reverb Module - Accutronics Belton, Digi-Log, Mini, Horizontal
Multiple Options Available
A great digital reverb sound that easily replaces a spring reverberation unit.
$14.95
Click to read more
P-L300X
P-L300X
Item ID: 005130
LED - 3mm (Package of 5)
Colors Available:

Package of 5. Color: Yellow, red, or green Lens Diam: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.


$0.65
Click to read more
P-H410-A
P-H410-A
Item ID: 039815
Footswitch - Quad Pole, Double Throw (4PDT), Black, 12 Pins
4PDT latching footswitch with 12 solder lugs.
$3.25
Click to read more
P-LTX387
P-LTX387
Item ID: 002968
Bulb - Morley, Effects Pedals Replacement

AML387 incandescent light bulb, T-1 3/4 midget flanged, miniature lamp. Great replacement for Morley. Specifications:



  • Design Volts: 28.0
  • Design Amps: .04
  • Candle Power: .30
  • Filament Shape: C-2F
  • Average Life (Hours): 7,000

$0.95
Click to read more

Pages

(13 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts

Effect Pedals & Parts

Current Filters Remove All

Effect Pedals
Filter By

Brand: