You are here

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects.

Build a kit or purchase parts to make your own!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(14 pages)
P-ECB-GEARGear - for Wah Potentiometer

Generic gear (a.k.a. pinion) for wah-style potentiometers. Outer diameter = 0.48", height = 0.61". Push-on for splined 1/4" shaft. Push-on mounting allows any 1/4" splined shaft potentiometer to be equipped for use with rack and pinion shaft rotation as in a wah pedal.


$1.50
Click to read more
M-PAS-CABLE-1Cable - Power All, 5 Lead Right Angle Daisy Chain

Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the PA-9 Power-All to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices


$7.50
Click to read more
P-ECB-152Bottom Plate - Dunlop, for GCB-95 with Battery Door

Bottom Plate for GCB-95. Original Dunlop replacement part. Includes battery box, four mounting screws and four black rubber feet.


$13.95
Click to read more
P-ECB-9V2Battery Box - Gotoh, Dual, 9 Volt

Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries. Four wood screws included. Directions: 1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24") 2. Put the box in guitar body and fix it by screws.


$19.00
Click to read more
K-997Effects Pedal Kit - MOD® Kits, The Erratic Clutch Deluxe, Fuzz / Divider

The Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.


$72.95
Click to read more
P-RBTDR-1H-XReverb Module - Accutronics Belton, Digi-Log, horizontal mount

A great digital reverb sound that easily replaces a spring reverberation unit. Simple interface requires only input, output, +5V, and ground. Output requires no external capacitors.


Starting at $12.95
Click to read more
M-PAS-SPower Supply - Power All System, 9V, 2000mA, for Effects Pedals

The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks - the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet! The Power-All's special circuit design offers the lowest noise floor of any digital power supply on the market. The PA-9S now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum.


$19.95
On Backorder
Click to read more
R-VPC01Photo Cell - Morley, for Effects Pedals

Photocell for Morley effects pedals. Great replacement for LDR1, LDR2 and LDR3 (M79-211564-000) in Morley Pro Series Volume PVO. Sold individually.


$2.50
Click to read more
R-VWAH-LPPotentiometer - 100kΩ, Wah Replacement, Life, Smooth

100K Life Pot is a high grade Wah pot replacement. This wah pedal upgrade is sold with all necessary hardware and gear for immediate installation.


$11.95
Click to read more
K-977Effects Pedal Kit - MOD® Kits, Suspended Chime, Chorus, Delay

The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.


$99.95
Click to read more

Pages

(14 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts