Pedal Parts / DIY

The ZipWire™ Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.

The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.

Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.

1591T Series enclosure made of clear polycarbonate. The 1591B is a similar size to the 1590B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.

• Ideally suited for mounting printed circuit boards.
• Perfect for applications where parts, sensors or indicators need to be visible.
• Crystal Clear version is almost totally transparent.
• Integral card guides accept 1.5 mm (0.062”) P.C. cards.
• Lap joint construction provides protection against access of dust and splashing water.
• Designed to meet IP54.
• Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
• Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.

The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 23.

600V solid wire. UL style 1015, rated to 105 degrees C. Perfect for new projects, rewiring electrical equipment, or use in breadboards, perfboard, and veroboard/stripboard.

High quality 24AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required. This wire is ready to go as soon as it is cut and stripped making assembly that much easier. Rated at 300V and offered in a variety of colors, this wire is a great option for a variety of different projects.

1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.

5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

ST3U StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. It has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features

• Standard stripboard pattern, with tracks running the length of the board.
• Single-sided high-quality FR4 glass-epoxy circuit board.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Add 0.16" to enclosure depth for lid.

Coiled metal wire type tip cleaner for use with soldering irons. The metal wire cleaner requires no water which reduces temperature drops in the tip compared to using a sponge. The black metal holder is dome shaped to reduce airborne solder droplets when cleaning. The holder has a detachable top and bottom to easily empty when necessary.

Atten TJ-228 soldering iron stand with adjustable mounting angle, sponge holder and solder spool stand. This stand is a great option for stand-alone soldering irons or as a replacement for a worn out stand.

This is a small double pole double throw (DPDT) effect / bypass latching switch for MXR pedals. Genuine Dunlop replacement part. Six pin through hole PCB mount.

VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.

4PDT latching footswitch with solder lugs. Blue with 12 solder lugs. Made in Taiwan.

All-metal solder spool stand with a large metal roller for a smooth reel out. This stand features a handle as well as an eyelet that holds the solder line in a static position for ease of use. Extremely useful for making your soldering jobs quick and easy!

Carling SPST latching On-Off footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).

Genuine Dunlop replacement fuzz potentiometer for JDF2 Fuzz Face. 1 kΩ, linear, solid plastic shaft. Made In U.K.

1 row/12 lugs per row. 2 mounting holes. Board dimensions 5 ¼" x ½".

The AS301AH is Alfa’s version of the LM301A in an 8 pin TO5 package. The AS301A is a general purpose operational amplifier. This amplifier offers many features which make its application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, and freedom from oscillations and compensation with a single 30 pF capacitor. It has advantages over internally compensated amplifiers in that the frequency compensation can be tailored to the particular application. For example, in low frequency circuits it can be overcompensated for increased stability margin. Or the compensation can be optimized to give more than a factor of ten improvements in high frequency performance for most applications. In addition, the device provides better accuracy and lower noise in high impedance circuitry.