Pedal Parts / DIY

Chassis Box - Hammond, 1591BTCL, Crystal Clear, Polycarbonate, 4.40 x 2.40 x 1.10
1591T Series enclosure made of clear polycarbonate. The 1591B is a similar size to the 1590B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.
  • Ideally suited for mounting printed circuit boards.
  • Perfect for applications where parts, sensors or indicators need to be visible.
  • Crystal Clear version is almost totally transparent.
  • Integral card guides accept 1.5 mm (0.062”) P.C. cards.
  • Lap joint construction provides protection against access of dust and splashing water.
  • Designed to meet IP54.
  • Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
  • Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.
$8.95
Heat Shrink - ¼" Diameter x 6" Long, 23 Pieces
The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 23.
$8.95
package of 23
Solder - Kester, 60 / 40, 44 Flux, 66 Core, .031 Dia, .5 oz
Kester 44 60/40 rosin core type. .031" diameter, 0.5 oz
$8.85
Chassis Box - 1590XX, Diecast, 5.72" x 4.77" x 1.55"
5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.
$8.80
StripBoard - Single Sided, 6.30” x 3.94”
ST3U StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. It has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features
  • Standard stripboard pattern, with tracks running the length of the board.
  • Single-sided high-quality FR4 glass-epoxy circuit board.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
$8.75
Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.75
Chassis Box - Hammond, 1590G, Diecast, 3.94" x 1.97" x 0.83"
Special Order Item
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Add 0.16" to enclosure depth for lid.
$8.73
Out of Stock
Tip Cleaner - Wire Type for Soldering Irons
Coiled metal wire type tip cleaner for use with soldering irons. The metal wire cleaner requires no water which reduces temperature drops in the tip compared to using a sponge. The black metal holder is dome shaped to reduce airborne solder droplets when cleaning. The holder has a detachable top and bottom to easily empty when necessary.
$8.64
Soldering Iron Stand - Atten, TJ-228, Deluxe
Atten TJ-228 soldering iron stand with adjustable mounting angle, sponge holder and solder spool stand. This stand is a great option for stand-alone soldering irons or as a replacement for a worn out stand.
$8.55
Switch - Dunlop, MXR, DPDT, PC mount
This is a small double pole double throw (DPDT) effect / bypass latching switch for MXR pedals. Genuine Dunlop replacement part. Six pin through hole PCB mount.
$8.50
Optocoupler - XVive, VTL5C1, Vactrol, for Channel Switching
VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
$8.40
On Backorder
Switch - Footswitch, 4PDT, Blue, 12 Pins
4PDT latching footswitch with solder lugs. Blue with 12 solder lugs. Made in Taiwan.
$7.99
Tool - Solder Spool Stand
All-metal solder spool stand with a large metal roller for a smooth reel out. This stand features a handle as well as an eyelet that holds the solder line in a static position for ease of use. Extremely useful for making your soldering jobs quick and easy!
$7.99
Cable - Power All, 5 Lead Right Angle Daisy Chain
Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the Power-All® ECO-Dapter® 9 VDC power supply to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).
$7.95
Chassis Box - 1590C, Diecast, 4.72" x 3.70" x 2.10"
4.72" x 3.70" x 2.1" (119mm x 94mm x 56mm) diecast aluminum enclosure. Equivalent to the Hammond 1590C enclosure. This enclosure is a taller version of the 1590BB allowing for more vertical space for larger projects.
$7.95
Terminal Strip - 1 row, 12 turrets per row
1 row/12 lugs per row. 2 mounting holes. Board dimensions 5 ¼" x ½".
$7.95
Wire - Bus, 100 foot Spool, tinned copper
Solid tinned copper bus wire. 105°C temperature rating, 600V.
Starting at $7.95
Potentiometer - Dunlop, 1 kΩ FUZZ for the JDF2 Fuzzface
Genuine Dunlop replacement fuzz potentiometer for JDF2 Fuzz Face. 1 kΩ, linear, solid plastic shaft. Made In U.K.
$7.95
Footswitch - Carling, SPST, for Fender® Switching Pedals
Carling SPST latching On-Off footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$7.95
Op-Amp - AS301AH, Alfa, Single, TO5-8 case
The AS301AH is Alfa’s version of the LM301A in an 8 pin TO5 package. The AS301A is a general purpose operational amplifier. This amplifier offers many features which make its application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, and freedom from oscillations and compensation with a single 30 pF capacitor. It has advantages over internally compensated amplifiers in that the frequency compensation can be tailored to the particular application. For example, in low frequency circuits it can be overcompensated for increased stability margin. Or the compensation can be optimized to give more than a factor of ten improvements in high frequency performance for most applications. In addition, the device provides better accuracy and lower noise in high impedance circuitry.
$7.95
Wire - 22 AWG Stranded Core, PVC, 600V, Variety Pack
Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:
  • Black
  • Red
  • Green
  • White
  • Yellow
  • Blue

​​9 Pack (9 colors, 90 total feet) includes:
  • Black
  • Red
  • Green
  • White
  • Yellow
  • Blue
  • Orange
  • Brown
  • Purple

See S-W22 for 50 foot rolls of individual colors.
Starting at $7.95
Footswitch - 3PDT, with built-in LED Ring
Colors Available:
3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Starting at $7.95
OTA - AS3280, Dual, Linearizing Diodes, Alfa, 16-Pin DIP
The AS3280 is Alfa’s version of the CA3280 IC. The AS3280 consists of two variable operational amplifiers that are designed to substantially reduce the initial input offset voltage and the offset voltage variation with respect to changes in programming current. This design results in reduced "AGC thump," an objectionable characteristic of many AGC systems. Careful design of critical places of the circuit reduces the amplifier dependence upon thermal and processing variables.
The AS3280 has all the generic characteristics of an operational voltage amplifier except that the forward transfer characteristics is best described by transconductance rather than voltage gain, and the output is current, not voltage. The magnitude of the output current is equal to the product of transconductance and the input voltage.
$7.95
Chassis Box - Hammond, 1550P, Diecast, 3.15” x 2.17” x 0.83”
The 1550P is a 3.15 in. x 2.17 in. x 0.83. diecast enclosure made by Hammond. This enclosure is a great option for extra compact builds while still offering plenty of room for an easy construction.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
  • M3.5-0.6 threaded holes for mounting the bottom plate. Screws included.
$7.75