You are here

Effect Pedals & Parts

Adding effects to your signal path is a great way to alter the sound of your guitar. Add reverb, delay, distortion, frequency ranges and other dynamic effects.

Build a kit or purchase parts to make your own!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(14 pages)
P-ECB-FI-01Inductor - Dunlop, Fasel, Toroidal with Cup Core Tone, Yellow

This yellow fasel is a Toroidal design with the tonal character of a cup core, best for attaining a vintage vibe. Use the precision-wound Toroidal, part number P-ECB-FI-02, for the cleanest sound possible. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from your rig.


$15.95
Click to read more
P-ECB-FI-02Inductor - Dunlop, Fasel Toroidal Model, Red

This precision-wound toroidal will give the cleanest sound possible. Use the cup core model, part number P-ECB-FI-01 for a more vintage sound. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.


$15.95
Click to read more
P-ECB-GEARGear - for Wah Potentiometer

Generic gear (a.k.a. pinion) for wah-style potentiometers. Outer diameter = 0.48", height = 0.61". Push-on for splined 1/4" shaft. Push-on mounting allows any 1/4" splined shaft potentiometer to be equipped for use with rack and pinion shaft rotation as in a wah pedal.


$1.50
Click to read more
P-ECB-HI01Inductor - Dunlop, for Crybaby, HI01 Halo Inductor

Cry Baby Genuine Replacement Part HI01 Halo Inductor. Used in the famous Clyde McCoy® wah, the Halo Inductor is the key to late ’60s American wah tone. The HI01 delivers that vintage sound, with its expressive sweep and throaty voice, while minimizing microphonic noise due to its stabilized cup-core material.


$45.95
Click to read more
P-ECB-RACKRack - for wahs and other pedals

Generic rack with 18 teeth for wah and other pedals using rack and pinion potentiometer shaft rotation. (Length = 1.91", width = 0.19", height = 0.25". Mounting hole diameter = 0.075")


$0.75
Click to read more
P-GRIP-1Pedal Tape - Godlyke, Power Grip, 1 Meter Roll

For the best Pedalboard Dual Lock and Velcro Alternative, try Power-All Power-Grip. Simple, yet ingenious, Power-Grip pedal board tape mates to itself via rows of tiny mushroom-shaped posts that form a much stronger bond than traditional "hook & loop" Velcro fasteners. Just cut to size, apply, and GRIP! Approximately enough for 6 standard-sized pedals


$14.95
Click to read more
P-H1590AChassis Box - Hammond, Unpainted Aluminum, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$6.22
Click to read more
P-H1590BBCE-PDChassis Box - Aluminum, 4.67" x 3.68" x 1.18", pre-drilled
Same as Hammond P-H1590BB, but generic manufacture made in Taiwan. Measures 4.67" x 3.68" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ ½" dia., 2 @ 3/8" dia, and 2 @ 8 mm dia.
$9.95
Click to read more
P-H1590BBCE-XChassis Box - Diecast Aluminum, 4.67" x 3.68" x 1.18"
Colors Available:

Chassis box perfectly suited for effects pedals and other DIY projects.


Starting at $8.95
Click to read more
P-H1590BBXChassis Box - Hammond, Aluminum, 4.67" x 3.68" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Starting at $9.42
Click to read more

Pages

(14 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts