You are here

Effect Pedals & Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(11 pages)
K-970Effects Pedal Kit - MOD® Kits, The Tea Philter, T Filter

The Tea Philter - A T-Filter Pedal Kit The Tea Philter pedal produces a fixed wah tone allowing you to lock it in without rocking the pedal back and forth. Every guitar/wah combination has a certain sweet spot that is perfect for lead and chord work. The Tea Philter lets you dial in everything from your favorite vocal mid-range tone to thick lows. Using point-to-point wiring and easy-to-follow instructions you can have a working fixed wah pedal in a matter of hours. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately.


$31.95
$28.76
You save: 10%
Click to read more about this product.
K-975Effects Pedal Kit - MOD® Kits, Ring Resonator, Octave-Up Fuzz
The Ring Resonator is the newest member of the MOD® Kits DIY family. Order now to be one of the first people to get this new octave up fuzz pedal!
The Ring Resonator kit is an octave up fuzz effect; an all analog design that captures those late '60s octave-up fuzz tones. Transformer coupled germanium diodes produce sounds that range from a subtle octave up to thick, harmonically rich sonic textures and synth-like tones. Experimenting with different pickups and tone control settings on your guitar with the Ring Resonator can also produce sitar-like sounds.
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included. All you need to provide are hand tools, a soldering iron and solder.
The effect pedal operates on a 9V battery.
$64.95
$58.46
You save: 10%
Click to read more about this product.
P-HWAHEnclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware
$40.00
$36.00
You save: 10%
Click to read more about this product.
P-ECB-GEARGear - for Wah Potentiometer
Generic gear (a.k.a. pinion) for wah-style potentiometers. Outer diameter = 0.48", height = 0.61". Push-on for splined 1/4" shaft.
Push-on mounting allows any 1/4" splined shaft potentiometer to be equipped for use with rack and pinion shaft rotation as in a wah pedal.
$1.50
$1.35
You save: 10%
Click to read more about this product.
P-ECB-9V1ABattery Box - Gotoh, single, 9 volt
Single 9 volt battery box.
See P-ECB-9V1B for single battery box with removable adapter.
See P-ECB-9V2 for double battery box.
$13.95
$12.56
You save: 10%
Click to read more about this product.
P-ECB-9V1BBattery Box - Gotoh, single, 9 volt, with removable adapter
Single 9 volt battery box.
See P-ECB-9V1A for single battery box without removable adapter.
See P-ECB-9V2 for double battery box.
$13.95
$12.56
You save: 10%
Click to read more about this product.
P-ECB-9V2Battery Box - Gotoh, Dual, 9 Volt
Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries.
Four wood screws included.
Directions:
1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24")
2. Put the box in guitar body and fix it by screws.
$24.00
$21.60
You save: 10%
Click to read more about this product.
K-980Effects Pedal Kit - MOD® Kits, The Persuader Deluxe, Overdrive
The Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion.
Four dual triode vacuum tubes are included with each kit (JJ 5751, 12AX7B China, JJ 12AU7 and a NOS USA-made 12AT7). Swap to create a wide range of tones from just a hint of break up from the JJ 5751 to over the top crunchy distortion using the NOS US made 12AT7.
A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode.
Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$99.95
$89.96
You save: 10%
Click to read more about this product.
K-985Effects Pedal Kit - MOD® Kits, The Wahtz, Wah
The Wahtz Wah Pedal Kit produces the classic Wah tone you've come expect with a hint of extra bite and growl.
True bypass switching insures no loss of signal when the Wah effect is not engaged; and the long life potentiometer manufactured specifically for use in Wah pedals is included to provide years of smooth, quiet operation.
Point to point construction allows advanced kit builders to easily experiment with modifications to further tailor the tone to more individual tastes.
MOD® Kits and Assemblies are designed to give novice and experienced musicians the opportunity to build or modify their own amps, effects pedals and guitars. All kits come with easy-to-follow instructions and use point-to-point wiring. All effect pedals and amplifiers come with a pre-drilled enclosure and all necessary parts are included. All you need to provide are hand tools, a soldering iron and solder.
$109.95
$98.96
You save: 10%
Click to read more about this product.
P-ECB-502Replacement Pad - Dunlop, Rubber Slide
Original Dunlop "slide pad medium" (4 1/2" x 3 3/8").
Perfect fit for MXR Phase 100 and other similarly sized pedal enclosures, including Hammond Mfg 1590BB (see also P-H1590BBCE).
Self adhesive backing allows it to be easily secured to the bottom of an enclosure's cover plate. Use as an alternative means to rubber feet for adding grip between the pedal and the floor.
$1.75
$1.58
You save: 10%
Click to read more about this product.

Pages

(11 pages)
Subscribe to RSS - Effect Pedals & Parts