You are here

Effect Pedals & Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(14 pages)
P-ECB-9V2Battery Box - Gotoh, Dual, 9 Volt
Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries.
Four wood screws included.
Directions:
1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24")
2. Put the box in guitar body and fix it by screws.
$19.00
Click to read more
P-RBTDR-2V-XReverb Module - Accutronics, Digi-Log, Mini, Vertical Mount
Multiple Options Available

BTDR-2 DIGI-LOG REVERB MODULE A great digital reverb sound that easily replaces a spring reverberation unit Features:



  • Small package is half the size of the BTDR-1
  • Stereo outputs may be summed for mono operation
  • Simple interface requires only input, output, +5V, and ground
  • AC-coupled input and outputs require no external capacitors


Please see http://www.accutronicsreverb.com for more info.


$14.95
Click to read more
P-ECB-590Screws - Dunlop, MXR, housing screws, package of 4
Genuine Dunlop replacement housing screws for MXR/ Dunlop pedals. Replace lost screws and keep your battery access plate on tight. 6-32 thread, Phillips head.
$1.50
Click to read more
K-970Effects Pedal Kit - MOD® Kits, The Tea Philter, T Filter

The Tea Philter - A T-Filter Pedal Kit The Tea Philter pedal produces a fixed wah tone allowing you to lock it in without rocking the pedal back and forth. Every guitar/wah combination has a certain sweet spot that is perfect for lead and chord work. The Tea Philter lets you dial in everything from your favorite vocal mid-range tone to thick lows. Using point-to-point wiring and easy-to-follow instructions you can have a working fixed wah pedal in a matter of hours. The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately.


$31.95
Click to read more
P-RBTDR-3HReverb Module - Accutronics Belton, Digi-Log, Adjustable Decay
A great digital reverb sound that easily replaces a spring reverberation unit

Features:
  • Reverb depth (decay adjustable via 2 external resistors or 1 dual potentiometer
  • Stereo outputs may be summed for mono operation
  • Simple interface: input, output, +5V, and ground
  • AC-coupled input and outputs require no external capacitors

Specifications:


PARAMETER
SYMBOL
MINIMUM
TYPICAL
MAXIMUM
UNIT


Supply Voltage
Vcc
4.5
5.0
5.5
V


Supply Current
Icc

60
100
mA


Input Voltage
Vin


1.5
Vpeak


Voltage Gain


-3

dB (>10kOhm load)


Residual Noise


-77

dBV


Input Impedance
Zin

10k

Ohm


Output Impedance
Zout

220

Ohm


Operating Temperature

-40
$15.95
Click to read more
P-ECB-31Felt Pad - Dunlop, for Wahs
$1.25
Click to read more
P-ECB-67Knob - Dunlop, MXR, small knurled, aluminum
Genuine Dunlop replacement small knurled knob for MXR pedals. Push -on style knob designed for use with knurled shafts.
$2.25
Click to read more
P-ECB-78Potentiometer - Dunlop, 10K linear
Genuine Dunlop replacement potentiometer for wah/volume.
  • 10K Linear
  • Gear included
$13.95
Click to read more
K-950Effects Pedal Kit - MOD® Kits, The Thunderdrive, Overdrive
The Thunderdrive is an overdrive pedal kit that will provide a signal boost at low gain settings and its own distortion at maximum gain settings. You can use it to push your preamp into overdrive or as a source of smooth distortion. Adjusting volume control and gain control results in a wide variety of tones in spite of its simple construction.
This pedal is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. Using point to point wiring and easy to follow instructions you can have a working overdrive pedal in a matter of hours.
All you need to provide is solder and a soldering iron. Uses 9 volt battery which is not included.
$29.95
Click to read more
P-H553Switch - Carling, Footswitch, SPST, On-(Off), Solder Lugs
Carling footswitch, SPST, momentary On-(Off) normally closed with solder lugs.

Note: On-(Off) switches may sometimes be referred to as On-None-(Off).
$7.95
$6.95
You save: 13%
Click to read more

Pages

(14 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts