You are here

Effect Pedals & Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(10 pages)
R-VPC01Photo Cell - Morley, for Effects Pedals

Photocell for Morley effects pedals. Great replacement for LDR1, LDR2 and LDR3 (M79-211564-000) in Morley Pro Series Volume PVO. Sold individually.


$2.50
Click to read more about this product.
P-ECB-126Gear - Dunlop, for Wah
Original Dunlop replacement gear for wah potentiometers (C-ring included).
The gear has 14 teeth and a flatted inner diameter to fit securely onto a potentiometer with flatted shaft. The included C-ring is placed over the top end of the gear to keep it from sliding off the end of the potentiometer shaft.
$1.95
Click to read more about this product.
P-ECB-156Inductor - Dunlop, for Crybaby, 500mH
500mH inductor for all Crybaby models. Original Dunlop replacement part.
$11.50
Click to read more about this product.
P-ECB-151Rubber feet - Dunlop, for Crybaby, includes screws

Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)


$2.50
Click to read more about this product.
P-H1590XXChassis Box - Hammond, Unpainted Aluminum, 5.3" x 4.4" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$12.39
Click to read more about this product.
P-H1590LBChassis Box - Hammond, Unpainted Aluminum, 1.99" x 1.99" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$5.84
Click to read more about this product.
M-PAS-CABLE-2Cable - For Power All Systems, C-11/R
Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.
Plugs: (11): Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 10 mm. Spring-loaded right-angle male plugs
Cable length: 3962.4 mm (approximately 156 inches) total, 270 mm (10.5") between jacks.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$15.00
Click to read more about this product.
M-PAS-CABLE-7Cable - For Power All Systems, C-R/R
Included in the Power-All System and also available separately, the Cable-Red/R allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection.
The Cable-Red/R can be hooked to any plug on any of the Power-All daisy chains, or directly to the Power-All.
Length: Cable-Red/R is 140 mm (approximately 5.5 inches) in length from plug to plug.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$3.00
Click to read more about this product.
P-ECB-RACKRack - for wahs and other pedals
Generic rack with 18 teeth for wah and other pedals using rack and pinion potentiometer shaft rotation.
(Length = 1.91", width = 0.19", height = 0.25". Mounting hole diameter = 0.075")
$0.50
Click to read more about this product.
P-H1590FChassis Box - Hammond, Unpainted Aluminum, 7.38" x 7.38" x 2.48"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$25.98
Click to read more about this product.

Pages

(10 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Effect Pedals & Parts