Effects pedal, Morley Power Wah

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

Effects Pedal - Maxon, OD808, Overdrive
The Maxon OD808 is an identical circuit to the original TS808 Tubescreamer Maxon designed and built in the late 1970s. Featuring a JRC4558, the OD808 offers the same natural overdriven tones as the original pedals used widely across all genres of music. The OD808 has a warmer and smoother tone than the OD-9 that pairs nicely with clean amps in addition to sounding great in just about any rig.
Features
  • Natural and smooth overdrive effects with tube-like saturation
  • Preserves the original tone of the instrument
  • Produces a variety of sound ranging from a clean boost to fully saturated overdrive
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$99.95
Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against. The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.
$82.45
Effects Pedal - Maxon, SD9, Sonic Distortion
The SD9 Sonic Distortion offers saturated distortion perfect for screaming leads and thick rhythms. The SD9 was designed in the same era as the OD9 and this pedal can go toe-to-toe with its overdrive counterpart. Providing smooth distortion, long sustain, and clear articulation, the SD9 can fill a room with classic distortion sounds. Features
  • Bright distortion with articulate pick attack over the entire frequency range.
  • Sweet harmonics and accentuated high-end tones
  • True Bypass Switching
  • Low noise mechanical switch
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$128.95
On Backorder
Effects Pedal - Maxon, OD808X, Overdrive Extreme
The OD808X is the perfect pedal for those wishing their OD808 went to 11. The OD808X offers more of everything with its extended drive, frequency response, and overall levels providing an articulate overdrive that can cut through any mix. Features
  • Based on the classic natural drive sound of Maxon’s OD808 circuit.
  • Offers an extended frequency range and response compared to the OD808. The additional range has been carefully tuned to provide clarity and accentuate the high-gain settings.
  • OD808X offers more gain and harder clipping than the standard OD808, creating tube-like distortion with excellent note definition and clarity.
  • OD808X features a buffered JFET bypass switching with a low impedance output, allowing it to drive long cables or other effect units without loss of signal.
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$99.95
Effects Pedal - Maxon, OD9, Overdrive
The Maxon OD-9 is the original Tube Screamer TS9 circuit built by the company that designed this immensely popular overdrive pedal. They left no boxes unchecked by including a genuine JRC4558 and the only departure from the original is the inclusion of true bypass switching, a modern necessity. The OD-9 offers slightly more gain than the OD808.
Features
  • Identical to the original circuit and featuring the JRC4558 IC chip
  • Natural tube-like overdrive that smoothly responds to dynamic signals
  • True Bypass Switching
  • Low noise mechanical switch
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$124.95
Effects Kit - Mod® Electronics, The Wave, Spring Reverb
The Mod® Electronics Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The Dwell control adjusts the input signal level driving the tank and the Reverb control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
$360.00
Effects Pedal - Maxon, GE601, Graphic Equalizer
The Maxon GE601 graphic equalizer is the perfect tool for dialing in guitar tone. The six bands are set with slide potentiometers offering precision controls with a visual representation of the sound spectrum. Each band can both cut and boost sound for a variety of tonal shaping effects as well as frequency specific boost effects.
Features
  • Six-band graphic eq with an overall level volume capable of producing various sounds
  • Bands cover 100Hz to 3.2KHz for effective tone shaping with guitars
  • Each band can cut or boost providing a variety of uses
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$120.95
Effects Pedal - Maxon, PT999, Phase Tone
The Maxon PT999 is a direct reissue of their classic 1970’s analog phaser. This pedal can range in speed from 0.2Hz up to 14Hz for a wide range of phase effects. The lower speeds offer slow moving phasing with a subtle and shimmering sound while faster speeds can take sounds into swirling and swooshing phaser sounds.
Features
  • Low-noise design with wide dynamic range perfect for both live sound and recording
  • Works well with any electric instrument such as guitar, bass, and keyboards
  • Offers a variety of sounds using the speed control to morph from clear and mild phase tones to heavy rolling phaser sounds
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$107.95
Effects Pedal - Maxon, PAC9, Pure Analog Chorus
The PAC9 is a classic analog chorus featuring swirling warm chorus sounds and stereo output for a wide chorus spread. In addition to the standard Speed and Width controls, the PAC9 offers a Bright switch for a focused sound and a Pure switch that boosts the signal. Features
  • Clean analog chorus sound using the Maxon MC4107D BBD chip
  • Speed and Width controls
  • Bright and Pure switches offer a variety of sounds for bold and deep chorus effects
  • Widely adjustable Speed range of 0.33Hz - 8Hz.
$229.95
Effects Pedal - Maxon, SM9Pro+, Super Metal Pro Plus
The SM9Pro is an upgraded version of the classic SM9 from Maxon. The original core of the circuit was kept intact and bolstered to meet the needs of heavy metal guitarists. A refined EQ control featuring an adjustable mid scoop allows users to dial in the perfect balance for their sound. The gain control provides sounds that range from classic heavy metal to the devastating tones of modern metal.
$169.95
Effects Pedal - Maxon, OOD9, Organic Overdrive
The OOD9 is the updated version of the original Maxon overdrive pedal, the OD880. This overdrive is equipped with NJM4558D op amps for a warm and low-noise overdrive that pairs perfectly with tube amplifiers and other distortion pedals. The OOD9 offers a dynamic response that preserves the tone of the input providing a smooth and clear overdriven sound.
$157.95
Switch - Replacement for Boss Effects Pedals
Replacement for Boss effects pedals, SPST momentary Off-(On), push switch. Mounts in square hole approximately. 55" x.55" x 1.08" overall length including terminals.
$2.99
¼" Jack - Marshall, PC Mount, 9 Pin, Effects Loop Return
Genuine Marshall SKTP-00004 jack. This 9 pin jack is used as the return jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack.The bushing is M12 x1.0 thread. For send jack, see S-H563
$4.00
Out of Stock
Bulb - Morley, Effects Pedals Replacement
AML387 incandescent light bulb, T-1 3/4 midget flanged, miniature lamp. Great replacement for Morley.
$0.95
Photocell - Morley, for Effects Pedals
Photocell for Morley effects pedals. Great replacement for LDR1, LDR2 and LDR3 (M79-211564-000) in Morley Pro Series Volume PVO. Sold individually.
A photocell may also be referred to as a photoresistor, LDR, or light dependant resistor.
$2.50
¼" Jack - Dunlop, Stereo, for effects pedals
Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.
$3.40
¼" Jack - Marshall, PC Mount, 5 Pin, Effects Loop Send
Genuine Marshall SKTP-00005 jack. This 5 pin jack is used as the send jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack. The bushing is M12 x1.0 thread.
For return jack, see S-H562
$4.00
Out of Stock
DSP Module - ABE, Accu-Bell Effector, 3 Adjustable Effects
The Accu-Bell Effector offers reverb, chorus, and delay with adjustable setting and tap tempo. This module runs on 5.5V to 9.5V DC so it is easy to incorporate into effect pedal builds. Please see the attached datasheet for an example schematic.
$21.95
Power Supply - Power-All® ECO-Dapter®, 9V, 2000mA, for Effects Pedals
Power-All® ECO-Dapter® is a center negative 9VDC power supply for effects pedals that can supply up to 2000mA of power making it a great choice for pedals boards and power hungry effects.
$24.35
Power Supply - Power-All® ECO-Dapter®, Cable Kits, for Effects Pedals
Power-All® ECO-Dapter® is a center negative 9VDC power supply for effects pedals that can supply up to 2000mA of power making it a great choice for pedals boards and power hungry effects. Power-All® kits include a variety of useful cables for powering multiple pedals to the ECO-Dapter® 9V supply.
Starting at $30.95
Footswitch Box - Original Fender, Channel Select, Effects On-Off
Restore your contemporary Fender amp’s footswitch functionality with a genuine replacement Fender footswitch. • Features 1/4" plug and 12' cable • Used for FM 65 DSP, Super Champ™ XD, Champion™ 40 and Champion 100 amplifiers
$25.95
On Backorder
DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
$32.00
Footswitch - 3PDT, Blue, latching-type
Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. Made in China.
$2.99
Footswitch - DPDT, Solder Lugs
Great replacement for stomp-box effects requiring a latching DPDT (Double Pole, Double Throw) switch. AC125V/4A AC250V/2A.
$3.99