Enclosures / Chassis

Hammond
Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Colors Available:
Starting at $1.35
package of 4
Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.75
Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54"
Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
Colors Available:
- Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Starting at $10.95
Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $10.95
Chassis Box - Hammond, Aluminum, 10" x 6" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
Does not include cover. See P-H1434-16
- Spot-welded heavy duty construction
- Natural finish
Does not include cover. See P-H1434-16
$18.95
Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
Colors Available:
New!:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
Starting at $13.95
Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
$9.40
Cover Plate - Hammond, Steel, 7" x 5", 20 Gauge
Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $5.95
Chassis Box - Hammond, 1590LB, Diecast, 1.99" x 1.99" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.45
Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$10.80
Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$11.95
Chassis Box - Hammond, Steel, 7" x 5" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-12 or P-H1431-12BK3
Colors Available:
Starting at $16.45
Cover Plate - Hammond, Aluminum, 10" x 6", 20 Gauge
20 gauge bottom chassis plate for P-H1444-16 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$10.50
Handle - Hammond, Steel Construction, 3.5”, 1427N2
Round metal handle with 3.5" mounting centers and 1.5" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features
Colors Available:
- Made of round steel
- 2 Screws - Panhead 8-32 x 1/2"
- 2 Internal Tooth Lockwashers
Starting at $5.20
Chassis Box - Hammond, 1590C, Diecast, 4.71" x 3.70" x 2.07"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $12.95
Cover Plate - Hammond, Steel, 12" x 8", 20 Gauge
Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $12.95
Cover Plate - Hammond, Steel, 10" x 6", 20 Gauge
Hammond Mfg 20 gauge steel 10” x 6” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
$9.70
Chassis Box - Hammond, Steel, 10" x 6" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See or P-H1431-16BK3
Colors Available:
$23.00
Chassis Box - Hammond, 1590P1, Diecast, 6.02” x 3.27” x 1.98”
Large 6.02” x 3.27” x 1.98” Hammond 1590P1 enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
Starting at $14.85
Chassis Box - Hammond, Steel, 12" x 8" x 3"
Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.
Colors Available:
- Spot welded heavy duty construction chassis.
- 0.036"" thick.
- Dimensions shown are exterior dimensions.
- Does not include cover. See P-H1431-22 Key
Starting at $35.70
Chassis Box - Hammond, Aluminum, 13" x 7" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$25.50
Chassis Box - Hammond, Aluminum, 17" x 8" x 3"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$36.95
Chassis Box - Hammond, Aluminum, 12" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$35.10
Chassis Box - Hammond, Aluminum, 16" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$37.55