Enclosures / Chassis

30° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 3" (1” height at front)
• Top panels are 0.064” thick aluminum
• Powder coated top and bottom
• Wood sides are real walnut - each piece has a unique color & grain.
• Solid oiled walnut sides on a black, ventilated steel base.
• Comes with self adhesive rubber feet and required mounting hardware.

Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.

15° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes.
Features:

• 4" x 5.5" x 2" (1” height at front)
• Top panels are 0.064” thick aluminum
• Powder coated top and bottom
• Wood sides are real walnut - each piece has a unique color & grain.
• Solid oiled walnut sides on a black, ventilated steel base.
• Comes with self adhesive rubber feet and required mounting hardware.

Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original MK1 Tone Bender enclosures and is pre-drilled to match the original layout of the MK1 pedal. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The MK1 fuzz enclosure features a removable bottom door for easy access to the battery. All required screws and rubber feet are included.

Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.

Pre-drilled wedge shaped pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original FZ-1 and FZ-1A Fuzz Tone enclosures but the predilled layout is inspired by the Octavio and the early Carlsbro fuzz. This provides a classic pedal design with a layout that is more compatible with modern pedalboards than the original Fuzz Tone layout. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The wedge shaped fuzz enclosure features a hinged bottom cover for easy access to the battery. The four screws that attach the bottom are included.

YY enclosure finished in a hammered blue powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features

• Vintage style slant
• Hammered blue powdercoat
• Flat top-section for mounting controls
• Recessed lid
• Thick diecast construction

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU 1590N1 (Gorva) P-H1590N1-GORVA-HMT-BLU 1590BB (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU

YY enclosure finished in a hammered charcoal powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features

• Vintage style slant
• Hammered charcoal powdercoat
• Flat top-section for mounting controls
• Recessed lid
• Thick diecast construction

Part of a limited run of hammered charcoal enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-CHC C65 (Gorva) P-H1590N1-GORVA-HMT-CHC 1590N1/125B P-H1590N1CE-HMT-CHC 1590TRPD Trapezoid P-H1590TRPB-HMT-CHC YY P-H-YY-HMT-CHC S90 (Gorva) P-H1590BB-GORVA-HMT-CHC 1590J P-H1590J-HMT-CHC

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Six 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.

15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 2" (1” height at front)
• Bottom panels are 0.081” (2 mm) thick aluminum
• Top panels are 0.064” thick aluminum
• Fully Powder Coated
• Comes with self adhesive rubber feet and required mounting hardware.

30° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 3" (1” height at front)
• Bottom panels are 0.081” (2 mm) thick aluminum
• Top panels are 0.064” thick aluminum
• Fully Powder Coated
• Comes with self adhesive rubber feet and required mounting hardware.

YY enclosure finished in a hammered green powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features

• Vintage style slant
• Hammered green powdercoat
• Flat top-section for mounting controls
• Recessed lid
• Thick diecast construction

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN

Eddystone 26827PSLA enclosure with similar dimensions to the Hammond 1590D enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590D style builds.

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Aluminum alloy to BS1490, LM2M - supplied in natural finish.
• Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
• Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
• Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
• Countersunk lid holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

YY enclosure finished in a hammered bronze powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features

• Vintage style slant
• Hammered bronze powdercoat
• Flat top-section for mounting controls
• Recessed lid
• Thick diecast construction

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ

YY enclosure finished in a hammered silver powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features

• Vintage style slant
• Hammered silver powdercoat
• Flat top-section for mounting controls
• Recessed lid
• Thick diecast construction

Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures finished in a hammered bronze powdercoat. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures finished in a hammered charcoal powdercoat. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Six 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.

Short trapezoid shaped Hammond enclosure in a hammered charcoal powdercoat. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:

• Hammered charcoal powdercoat
• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Short trapezoid shaped Hammond enclosure in a hammered blue powdercoat. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:

• Hammered blue powdercoat
• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Slanted YY enclosures perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features

• Vintage style slant
• Flat top-section for mounting controls
• Recessed lid
• Thick diecast construction

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Six 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Hammond Mfg. Diecast Aluminum Chassis Box – 7.4” x 4.7” x 1.3”. Made in Taiwan. Key Features: • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.