Enclosures / Chassis

20 gauge bottom chassis plate for P-H1444-16 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-178

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Six 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Same as Hammond P-H1590BB, but generic manufacture made in Taiwan. Measures 4.71" x 3.70" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ ½" dia., 2 @ 3/8" dia, and 2 @ 8 mm dia. Add 0.16" to enclosure depth for lid.

Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.

• Spot welded heavy duty construction chassis.
• 0.036"" thick.
• Dimensions shown are exterior dimensions.
• Does not include cover. See P-H1431-22 Key

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-137

Uniquely shaped trapezoid Hammond enclosure. Screws included.

Fender® style Tweed Champ™(5F1) chassis.

• Chrome plated steel, .06" thick.
• Screened white lettering
• 8-Pin (Octal) socket holes: 2
• 9-Pin (miniature) socket holes: 1
• Chassis Dimensions: 8-3/4" x 4-1/8" x 2 5/8"

The Gorva Design M45 enclosure has similar dimensions to 1590A but a bit larger for practical use. It measures 100mm [3.94"] x 45mm [1.77"] x 35 mm [1.38"]. The extended dimensions allow for easier builds and top mounted jacks. Features:

• Slightly beveled top and rounded corners for a high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for a more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Recessed bottom lid

Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box. Add 0.16" to enclosure depth for lid.

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-18

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-8

Large 6.02” x 3.27” x 1.98” Hammond 1590P1 enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

Hammond Mfg 20 gauge steel 10” x 6” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

4.40" x 2.38" x 1.65" (112mm x 61m x 42mm) diecast aluminum enclosure. Equivalent to the Hammond 1590BS enclosure. This enclosure is a taller version of the 1590B allowing for top mounted jack and more overall area for larger projects.

20 gauge. Cover for chassis box 17 inch wide by 10 inch deep. Spot welded steel - heavy duty construction chassis. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

20 gauge bottom chassis plate for P-H1444-12 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-30

Fender® style narrow panel Tweed Princeton™(5F2) chassis.

• Chrome plated steel, .06" thick.
• Screened white lettering
• 8-Pin (Octal) socket holes: 2
• 9-Pin (miniature) socket holes: 1
• Chassis Dimensions: 13-3/4" x 4-1/8 x 2-1/2"

20 gauge bottom chassis plate for P-H1444-22 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-12

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.

• Footswitch Hole Diameter: 0.492 in. (12.5mm)
• Potentiometer Hole Diameter: 0.294 in. (7.47mm)
• Jack Hole Diameter: 0.447 in. (11.35mm)