You are here

Enclosures

Hammond - Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(11 pages)
P-H1431-16XCover Plate - Hammond, Steel, 10" x 6", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 10” x 6” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$7.18
Click to read more
P-H1434-18Cover Plate - Hammond, Aluminum, 13.5" x 5"
20 gauge bottom chassis plate for P-H1444-18
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$7.18
Click to read more
P-H1434-127Cover Plate - Hammond, Aluminum, 12" x 7", 20 Gauge

Special Order Item

20 gauge bottom chassis plate for P-H1444-1273 Features:



  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter

$7.59
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1434-16Cover Plate - Hammond, Aluminum, 10" x 6"

20 gauge bottom chassis plate for P-H1444-16 Features:



  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter

$7.73
Click to read more
P-H1590B2Chassis Box - Hammond, Unpainted Aluminum, 4.4" x 2.3" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.73
Click to read more
P-H1590G2Chassis Box - Hammond, Unpainted Aluminum, 3.9" x 2.0" x 1.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.95
Click to read more
P-H1431-18XCover Plate - Hammond, Steel, 13.5" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 13.5” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8"" holes to allow installation of optional bottom plates).
$8.08
Click to read more
P-H1434-137Cover Plate - Hammond, Aluminum, 13" x 7", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1372
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$8.08
Click to read more
P-H1431-20XCover Plate - Hammond, Steel, 17" x 4", 20 Gauge
Colors Available:

Special Order Item

20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.



  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).


Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3


$8.09
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1590GChassis Box - Hammond, Unpainted Aluminum, 3.94" x 1.97" x 0.83"

Special Order Item

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
Vibra finished for a smooth surface with no sharp edges.
Four 6-32 x ½" machine screws secure lid - into tapped holes.
Designed to meet IP54.
Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$8.77
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more

Pages

(11 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures