Enclosures / Chassis

Chassis Box - GØRVA Design, M45, Diecast, 3.94" x 1.77" x 1.38"
Colors Available:
The Gorva Design M45 enclosure has similar dimensions to 1590A but a bit larger for practical use. It measures 100mm [3.94"] x 45mm [1.77"] x 35 mm [1.38"]. The extended dimensions allow for easier builds and top mounted jacks. Features:
  • Slightly beveled top and rounded corners for a high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for a more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
Starting at $11.95
Chassis Box - Hammond, 27969PSLA, Eddystone 1590A, Diecast, 3.6” x 1.5” x 1.2”
Eddystone 27969PSLA enclosure with similar dimensions to the Hammond 1590A enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590A style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$11.95
Chassis Box - Hammond, 1590N1, Diecast, 4.77" x 2.58" x 1.41"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
$12.50
Chassis Box - Hammond, 1590C, Diecast, 4.71" x 3.70" x 2.07"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $12.95
Chassis Box - Hammond, 27134PSLA, Eddystone 1590B, Diecast, 4.4” x 2.4” x 1.2”
Eddystone 27134PSLA enclosure with similar dimensions to the Hammond 1590B enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590B style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$12.95
Chassis Box - 1590DD, Diecast, 7.40" x 4.72" x 1.30"
Diecast Aluminum Chassis Box, 7.40" x 4.72" x 1.30". Six included machine screws secure lid. Add 0.16" to enclosure depth for lid.
$13.55
Chassis Box - Hammond, 1590STPC, Octagon, 5.23 x 5.23 x 1.38"
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"
Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine)
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x 1/2” machine screws secure lid into factory tapped holes
  • Designed to meet IP54
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting
$13.95
Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Colors Available:
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $13.95
Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Bronze
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered bronze powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
  • 4.77" x 2.58" x 1.41"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590N1
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.75
Out of Stock
Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Green
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered green powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
  • 4.77" x 2.58" x 1.41"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590N1
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.75
Out of Stock
Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Blue
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered blue powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
  • 4.77" x 2.58" x 1.41"
  • Hammered blue powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590N1
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU 1590N1 (Gorva) P-H1590N1-GORVA-HMT-BLU 1590BB (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$14.75
Out of Stock
Chassis Box - Hammond, 1590P1, Diecast, 6.02” x 3.27” x 1.98”
Colors Available:
Large 6.02” x 3.27” x 1.98” Hammond 1590P1 enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $14.85
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Bronze
Limited Run!
1590B diecast enclosure finished in a hammered bronze powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
Chassis Box - Hammond, 1590XX, Diecast, 5.72" x 4.77" x 1.39"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$14.95
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Silver
Limited Run!
1590BB diecast enclosure finished in a hammered silver powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered silver powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.
$14.95
Out of Stock
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Blue
Limited Run!
1590B diecast enclosure finished in a hammered blue powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered blue powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU C65 (Gorva) P-H1590N1-GORVA-HMT-BLU S90 (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$14.95
Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Silver
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered silver powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
  • 4.77" x 2.58" x 1.41"
  • Hammered silver powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590N1
  • Add 0.16" to enclosure depth for lid
$14.95
Out of Stock
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Silver
Limited Run!
1590B diecast enclosure finished in a hammered silver powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered silver powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid
$14.95
Out of Stock
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Bronze
Limited Run!
1590BB diecast enclosure finished in a hammered bronze powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Green
Limited Run!
1590BB diecast enclosure finished in a hammered green powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Green
Limited Run!
1590B diecast enclosure finished in a hammered green powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
Chassis Box - Hammond, 1590TRPC, Trapezoid, 5.95 x 3.74 x 1.38"
Colors Available:
Uniquely shaped trapezoid Hammond enclosure. Screws included.
$16.75
Chassis Box - Hammond, 1590X, Diecast, 5.72" x 4.77" x 2.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$17.40
Chassis Box - Hammond, 29830PSLA, Eddystone 1590BB, Diecast, 4.7” x 3.7” x 1.3”
Eddystone 29830PSLA enclosure with similar dimensions to the Hammond 1590BB enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590BB style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$18.95